My Brother got a new engine.

Ackbar00 · 11-19-2002, 11:45 AM

You may or may not remember the post from a few months ago about my brothers car "venting" his block street racing in St.Louis at the WFC this year. Last week we finally tore it down to the short block and found that #4 and 8 piston were turned sideways! The Crank was still intact, but the Stud Girdle was bent pretty bad. His new engine came from some guy in Calif. and had never been fired. Its a A4 Block with a 347 Stroker(Scat Crank, Ross Pistons) All ARP everything. We got 2 water pumps(standard and Electric) and a sweet Fabercated Oil pan. We noticed that the Valves on his heads are bent so we shiped them out this weekend. Hope to have it all back together by this Spring. "9.98@136 just isnt fast enough" is what he told me. That was only at 15 PSI on a T-66. He is looking for low 9's once we get the tune down on his Speed-Pro. I will try to get some pictures of both of his engines once i get my computer put back together.

hobgoblin351 · 11-19-2002, 01:35 PM

sounds like a sweet motor. 15PSI, you running, a blower or turbo?

inferno · 11-19-2002, 06:28 PM

Nice choice in turbo...why didn't he go with a bigger turbo though? Would have been the same price and spooled similarly.

Ackbar00 · 11-19-2002, 08:58 PM

The T-66 is from his old cartech street kit. That kit literaly fell apart. He got a turbo technology Race kit but kept his turbo to keep cost down.(the TTI kit cost over 3000$!). He said he will step up to a bigger turbo some time. He needs to upgrade his cage and rear end setup. But first, we just want ot get the damnn thing running

Ackbar00 · 11-21-2002, 05:37 PM

Ackbar00 · 11-21-2002, 05:38 PM

Ackbar00 · 11-21-2002, 05:39 PM

Ackbar00 · 11-21-2002, 05:41 PM

new engine

Conman · 11-22-2002, 02:23 PM

he tore that old engine up pretty good

NICE

Ackbar00 · 11-26-2002, 12:14 PM

We are thinking of cutting of the back 2 cylinders and makeing a 3.8 out of it. Mabey Baler would want to put it in his mustang.

11-19-2002, 11:45 AM	#1
Ackbar00 Rebel Fleet Commander Join Date: Oct 2001 Location: Huber Heights, OH Posts: 1,003	My Brother got a new engine. You may or may not remember the post from a few months ago about my brothers car "venting" his block street racing in St.Louis at the WFC this year. Last week we finally tore it down to the short block and found that #4 and 8 piston were turned sideways! The Crank was still intact, but the Stud Girdle was bent pretty bad. His new engine came from some guy in Calif. and had never been fired. Its a A4 Block with a 347 Stroker(Scat Crank, Ross Pistons) All ARP everything. We got 2 water pumps(standard and Electric) and a sweet Fabercated Oil pan. We noticed that the Valves on his heads are bent so we shiped them out this weekend. Hope to have it all back together by this Spring. "9.98@136 just isnt fast enough" is what he told me. That was only at 15 PSI on a T-66. He is looking for low 9's once we get the tune down on his Speed-Pro. I will try to get some pictures of both of his engines once i get my computer put back together. __________________ 1993 Mustang GT, PTK w/ T-64 - My Cardomain Webpage 11.25@123.5 on only 8 psi. 10.84@121 on only 1 headgasket "The Truth is, Your the Weak, and I am the Tyranny of Evil Men!"

11-19-2002, 06:28 PM	#3
inferno The Instigator Join Date: Jul 2000 Location: So Cal and Houston Posts: 764	Nice choice in turbo...why didn't he go with a bigger turbo though? Would have been the same price and spooled similarly. __________________ The most powerful weapon known to man is the human brain....unfortunately, many people are walking around unarmed.

11-22-2002, 02:23 PM	#9
Conman Registered Member Join Date: Apr 2002 Location: Kingston, Ontario Posts: 351	he tore that old engine up pretty good NICE __________________ '88 lx, Black on Black, check it out here Spent all my money on school, what a dumb mistake I'm old enough to know better, but still too young to care.

11-26-2002, 12:14 PM	#10
Ackbar00 Rebel Fleet Commander Join Date: Oct 2001 Location: Huber Heights, OH Posts: 1,003	We are thinking of cutting of the back 2 cylinders and makeing a 3.8 out of it. Mabey Baler would want to put it in his mustang. __________________ 1993 Mustang GT, PTK w/ T-64 - My Cardomain Webpage 11.25@123.5 on only 8 psi. 10.84@121 on only 1 headgasket "The Truth is, Your the Weak, and I am the Tyranny of Evil Men!"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rare Mustangs....Got One?	1969Mach1	Blue Oval Lounge	22	09-25-2010 04:59 AM
Very bad experience with Engine Dynamics of San Jose CA	JAGraff	Classic Mustangs	8	06-16-2005 11:43 AM
Very bad experience with Engine Dynamics of San Jose CA	JAGraff	Small Ponies	0	05-12-1999 02:27 AM
Very bad experience with Engine Dynamics of San Jose CA	JAGraff	Racer's Club House	0	05-12-1999 02:27 AM

11-19-2002, 01:35 PM	#2
hobgoblin351 Registered Member Join Date: Sep 2002 Location: NYC Posts: 245	sounds like a sweet motor. 15PSI, you running, a blower or turbo?

11-19-2002, 08:58 PM	#4
Ackbar00 Rebel Fleet Commander Join Date: Oct 2001 Location: Huber Heights, OH Posts: 1,003	The T-66 is from his old cartech street kit. That kit literaly fell apart. He got a turbo technology Race kit but kept his turbo to keep cost down.(the TTI kit cost over 3000$!). He said he will step up to a bigger turbo some time. He needs to upgrade his cage and rear end setup. But first, we just want ot get the damnn thing running __________________ 1993 Mustang GT, PTK w/ T-64 - My Cardomain Webpage 11.25@123.5 on only 8 psi. 10.84@121 on only 1 headgasket "The Truth is, Your the Weak, and I am the Tyranny of Evil Men!"