![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
![]() |
#1 |
Guest
Posts: n/a
|
![]() Launched of my 7600 rpm rev-limiter and got the following:
60ft.- 1.60 1/8mile - 7.75 @ 88.88 MPH 1/4mile - 12.18 @ 113.06 MPH There is more in it because I accidently shifted into 2nd gear at 5500 rpm!!! I couldn't reproduce another because the humidity shot up out of nowhere and I ran a bunch of 12.2's instead. I need to get rid of these FMS C springs and put some drag springs with an airbag in there. With a high 1.5x 60ft., I know 11's will be in the bag. Just in case anyone was wondering, this was thru the stock motor, IMRC's and all. I haven't gotten my new intake yet. Later, Jason ------------------ N/A 1997 Cobra 1/8 mile - 7.75 @ 88.88 MPH Best MPH - 90.08 1/4 mile - 12.18 @ 113.06 MPH Best MPH - 114.02 1.60 60 ft. |
![]() |
![]() |
#2 |
Registered Member
Join Date: Aug 2000
Location: santa ana ca
Posts: 1,349
|
![]() Congrats, glad to hear you got it back in action! Keep us posted.
------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors |
![]() |
![]() |
![]() |
#3 |
Dirk Diggler
Join Date: Feb 1999
Location: SLOATSBURG, NY
Posts: 1,931
|
![]() thats is sick..goood job..i wanna see 11's soon
------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. AIM=onesillynotch |
![]() |
![]() |
![]() |
#4 |
Sober voice of Reason
Join Date: Nov 1998
Location: Kelowna, B.C., Canada
Posts: 1,514
|
![]() That excites me man! With all the people dumping on the Cobra and talkin trash I love watching the cobra owners who kick @$$ and take names against these wannabees.
|
![]() |
![]() |
![]() |
#5 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
![]() Damn IM so jelous of that 113mph trap! Ive been wishing for 110 for so long, and I'm still so damn far away.
What RWHP did your car dyno? It seems that my 330rwhp + 3400lb weight should net a better MPH than 107. I just dont get it. I thought the dyno was off, but cars went in right before and after me and pulled off very normal numbers. (GT40P headed 5.0 277rwhp, and 99 C5 296rwhp). Anyways, congrats on the awesome running car.. Maybe some day I can join you in the 11's if my motor deciedes to come around. Sky 12.5@107. ------------------ -1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows. 12.55@107mph Going for 11's on 87 octane with A/C and 20+MPG!!! |
![]() |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
![]() I dynoed 298 rwhp and 294 rwtq.
Race Weight is 3290-3300 lbs. Weather has alot to do with the trap speeds, although, it was pretty humid out when I did this. Don't give up, it will come around!!! Back last summer, when I was busting my balls trying to get into the 12's, I wanted to give up and take the easy way out with nitrous or a blower. But, I persisted and look where I am at with a stock motor. Its just all about how to get the car to work at the strip. Later, Jason ------------------ N/A 1997 Cobra 1/8 mile - 7.75 @ 88.88 MPH Best MPH - 90.08 1/4 mile - 12.18 @ 113.06 MPH Best MPH - 114.02 1.60 60 ft. |
![]() |
![]() |
#7 |
Registered Member
Join Date: May 1999
Posts: 103
|
![]() What do you have done to the car.
I mean everthing. My brothers 97 put 305 to the wheels but the best we can get out of it is 106. this is long tubes with cat back ,pullys, 4:10's timing adjuster and Maf The car is kinna heavy it's been 11.80@116 with a 100 shot on nittos. we tried ET streets but they bogged the car down to much on the shifts( 26" to tall with too much drop off). ------------------ A.K.A. The LS1 Eater http://members.aol.com/jeauxmoe/index.html 5.0 lx,performer heads, GT-40 intake,JBA headers,stock cam and TB to name a few. 12.3@111.7 w/a 1.70 60ft 13.002 @109.8 on street tires w/a 1.96* 60 ft. Update 11.89@115 1.63 60ft on a small shot of gas. Now it's unnaturall 10psi from an S-trim= 12.0's @122 on street tires and pump gas. |
![]() |
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]() Your brother needs a 4.30+ gear, preferably 4.56's, and he needs to launch above 6500 rpms. Make sure he is shifting at 7000 rpms on every shift!!! I plan on running 150 shot of NOS myself later this year. I don't see 10's being a problem.
Alright, here is the lowdown on my car. Power: 298 rwhp @ 6300 rpm 294 rwtq @ 4900 rpm LaRocca's Dynotuned Autologic Chip 24 degrees total timing 13.3 A/F ratio BBK Longtube Headers, Offroad H, MAC Flowpaths welded into stock pipes, WMS Velocity Tube, Pro-M 87mm MAF, Steeda Pulleys, Steeda Timing Adjuster, the rest of the motor is stock from TB to Oilpan Driveline: FRPP Billet Steel Flywheel, McLeod Kevlar Disc, FRPP HD Pressure Plate, Steeda Firewall Adjuster, Tremec T-45, Steeda Tri-Ax Shifter, FRPP Aluminum Driveshaft, FRPP 4.56 gears, TracTech C-Locker, Moser 31 spline Axles, T/A Cover, Axle Tubes Welded Suspension: Tokico 5-way Adjustable Drag Struts and Stock Rear Shocks, HPM Megabite Jr. Lower Control Arms and Stock Uppers, FMS "C" springs Wheels/Tires: Front - Weld ProStars 15x3.5, Pepboy 165/15 radials, 3.5" ARP wheel studs Rear - Weld ProStars 15x10, Mickey Thompson ET Drag 26x10 slicks, 3" Moroso wheel studs Weight Reduction/Removal: Front Swaybar, Passenger Seat, MLR RearSeat Delete, Spare/Jack, Wipers/Antenna Race Weight(Guesstimate) = 3290-3300 lbs. with me in the car. I change the oil, plugs, and fuel filter every 1000-1500 miles. Can you say OVERKILL??? Not bad for a car that dynoed less than 300. After the tune though, it holds the peaks for alot longer than the average N/A Cobra. I don't know if my low dyno numbers are because of the billet steel flywheel or because of driveline friction from having the entire rear built the day of my dynotune. All I know is that the tune does its job at the track, where it counts. I don't powershift, PERIOD. If I had a trailer, I might try it, but I like being able to drive home after a day at the strip. And I don't consider myself that great of a driver, but I do hit every gear as fast as possible and with authority. ![]() Lauching at 7600 rpms is awesome to say the least!!! The stock tach looks buried just a hair off of 8000. If anyone desires to launch this high, I suggest a C-Locker, because last month I blew apart a 31 spline Trac-loc in 10 passes. Sorry for the long post. I hope this answers any questions. Later, Jason ------------------ N/A 1997 Cobra 1/8 mile - 7.75 @ 88.88 MPH Best MPH - 90.08 1/4 mile - 12.18 @ 113.06 MPH Best MPH - 114.02 1.60 60 ft. |
![]() |
![]() |
#9 |
Registered Member
Join Date: May 1999
Posts: 103
|
![]() The cars are very similar.
the only dif's are the 4:10's ,chip (will be going to get a JMS chip done soon) and the has road race 5 way's. I really think it should put out 109-110 like it sits (read as heavy as it sits). He has gone to the shorties (from the BBK long tubes)and gotten the cat back since the dyno but has not been to the track. I wonder if the NOS kinna made the motor a little tired (maybe some craked ring lands). ------------------ A.K.A. The LS1 Eater http://members.aol.com/jeauxmoe/index.html 5.0 lx,performer heads, GT-40 intake,JBA headers,stock cam and TB to name a few. 12.3@111.7 w/a 1.70 60ft 13.002 @109.8 on street tires w/a 1.96* 60 ft. Update 11.89@115 1.63 60ft on a small shot of gas. Now it's unnaturall 10psi from an S-trim= 12.0's @122 on street tires and pump gas. |
![]() |
![]() |
![]() |
#10 |
Registered Member
Join Date: May 1999
Location: Blacksburg, VA
Posts: 1,526
|
![]() Hurry up and pull that 11! I want that buck from 4cam.
![]() |
![]() |
![]() |
![]() |
#11 |
or '331 LX Eric'
Join Date: Jan 1999
Location: Columbus, Ohio
Posts: 2,142
|
![]() Jason - Congrats!!! You really should be proud of where you are with your Cobra with what you've got done to it. Really impressive in my book.
Keep up the good work and let us know when you get your 11 sec. ET! ![]() E ------------------ 1991 5.0 LX Coupe - 38,000 miles 13.17 @ 106.14 mph w/ 2.138 60' |
![]() |
![]() |
![]() |
#12 |
Registered Member
Join Date: Nov 1999
Location: illinois, USA
Posts: 649
|
![]() hehe. jason, i think an ls1.com'er may be calling you out
![]() Modded Cobra 1/4 time. the strawhouse most of those guys have in there heads of bolt on cobras turning the mph that a stock ls1 does it catching fire! ohh no! lol. ![]() |
![]() |
![]() |
![]() |
#13 |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
![]() Man that is a fast car that must be fun to be able to rip of low 12's all day. Sound like all of your parts mesh together really well. You launch at 7600
![]() ![]() ------------------ 88 mustang gt convertible bored to 306 BBk equal length headers mac cold air fender kit cowl hood nitto drag radials ford racing clutch flow masters h-pipe 160* thermostat 16 degrees of timing electric fan off 94' t-bird jacobs electronics cap and wires |
![]() |
![]() |
![]() |
#14 |
Guest
Posts: n/a
|
![]() Nice time....congrats. That's a pretty high rpm launch, wow! I launch alot easier than that.....but it's different for every car/driver....it's whatever you're comfortable w/ and what your car can handle.
------------------ '90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; fiberglass turbo hood; A/C-less; rear seat-less; cat-less; 2 chamber Flos; Corbeau racing seats (fronts); 30# injectors; 190 lb fp; TFS track heat Intake (12.299 @ 113) |
![]() |
![]() |
#15 |
Tubbed and Juiced
Join Date: Mar 2001
Location: Tulsa, Oklahoma
Posts: 1,861
|
![]() Impressive. =P
|
![]() |
![]() |
![]() |
#16 |
Registered Member
Join Date: Jan 1999
Location: allentown,pa,u.s.
Posts: 780
|
![]() Excellent run Jason. Your car is a great example of how our cars can run if set up right.
Good luck shooting for the 11's. ------------------ formerly 96cobra89lx306 (96Cobra/softtop-3.73,almdrvsht,fancontrl,steeda sbfrmes+shifter,eibachspgs,KYB's,FR-upper arms,Saleen copy-polished 18's,pulleys,Bassani X pipe(gutted),C&L 80mm Cobra DYNO 301rwhp horsepower before gutting the X pipe 93 Ford Probe Gt(slower but turns) |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
thinki saw '93 cobra but not sure.....plz confirm this for me(description) | yelowjaket | Blue Oval Lounge | 5 | 06-09-2003 05:49 PM |
Awesome,Fast Paced Night. 7 Mustangs and one 99 Z28 6spd. I Toast a 94 Cobra. | Mercury | Stang Stories | 7 | 10-30-2001 01:08 PM |
2001 Cobra Over Rated AGAIN!!!?!?!!! Wassup Ford? | KillaZ350 | Blue Oval Lounge | 24 | 06-29-2001 05:24 PM |
Safety Recall for 1999 Cobra and 2000 Cobra R | JoeJ | Special Production | 0 | 04-13-2001 08:18 PM |
Salaeen, Shelby, Cobra please define these for me. | Taqus | Blue Oval Lounge | 3 | 01-17-2001 02:39 AM |