Nitto Drag Radials vs. Yokohama A008P's
 

Hey this past weekend i raced a 95 Cobra who had Nitto Drag Radials 275/40--17. My car was equipped with Yokohama A008P's 255/40--17. When we took off he was spinning like crazy. I thought he was going to smoke me being a Cobra on drag radials but my yok's hooked up and he got dusted and disgusted http://www.mustangworks.com/msgboard/biggrin.gif. I had plans on getting some Nitto DR's but i'll just stick with my Yok's.

------------------
00'GT,(S281 clone),3 chamber flows,K&N filter,BBK underdrive pulleys & 3.73 gears. No time slip as of yet(est.13.7-13.9)

Don't be fooled by a bad driver, the Nitto's can hook, especially when driven well.

------------------
GT-40 heads (ported, polished, + milled), B303 cam, 1.7rr's, JE pistons, Offy intake, Carter AFB 625cfm carb, Flowtech 1 5/8" shortys, Flowtech X-pipe, MAC Flowpath exhaust, MAC pulleys, 373's, subframes, Eibachs+Tokicos, B&M ripper, FMS Clutch, Zoom Quadrant+cable, 17" CSA Ultra rims, 235/45ZR17 Yokohama AVS S4's, MSD 6A ignition+coil, FMS 9mm wires, Carbed, Naturally Aspirated, and Nasty!

I have em and like em. If you really want to get them sticky though you REALLY have to burn on them. Im talkin a good 15 second 2nd gear burnout, then launch quickly, dont waste your time or they wont hook as well.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

I agree I have nitto DR and I love them I can light them up with ease if I dont do a good burnout but warm them up and they hook up great http://www.mustangworks.com/msgboard/wink.gif

------------------
88 mustang gt convertible bored to 306 BBk equal length headers mac cold air fender kit cowl hood nitto drag radials ford racing clutch flow masters h-pipe 160* thermostat 16 degrees of timing electric fan off 94' t-bird jacobs electronics cap and wires.
best 60 ft 2.14, best 1/8th 9.65, best 1/4 15.2 @89mph

So the Yokos A008P's hook without warming them up? How much do they cost?

Nitrous Al: They hook up great without heating them up. Normally they cost around $210-$230 for 255/40-17 but i got mine for $195 thru a friend. They also last longer too!

------------------
00'GT,(S281 clone),3 chamber flows,K&N filter,BBK underdrive pulleys & 3.73 gears. No time slip as of yet(est.13.7-13.9)