383 stroker vs 5.0 mustang
 

--------------------------------------------------------------------------------
Ok everyone I just had to mention the happenings tonight. I was at work when this guy came in looking for a K&N for his car. This car is a 2200lb 1980 Dodge (yes dodge) spirit (yes, spirit). It really looks like **** but is does have a 383 stroker in it with a beefy cam, and all the performance parts. As it came to pass he said that he wanted to race the "black mustang out there" as he said which happened to be mine. I said that I get off in an hour and we can go out of town and run em. Well you know that a little moderately modified stang sporting a 5.0 really has no chance against the infamous chevy 383 stroker. Right? Beat him by 1.5 car lengths in over a quarter mile.
God bless 4.10's. And long live the mustang!

More details!!

Sky

------------------
-1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, 2 1/4" exhaust, and 4.10's.
332RWHP@5500
351RWTQ@3750
Runs on 87 Octane!

Definitely more details. I dont even know how you could stuff that huge motor in that thing. Must've been interesting.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

I dont know how he got the motor in but it is definately there! More details huu? like what, my mods, his?
First post in street racers.
How do i get my sig so show up? that would show my mods.

a Chevy 383 stroker or a Mopar 383 big-block

------------------
1990 Dodge Dynasty with 175,000 miles. Mods:chiped paint, CD player. Sucks but it was free. Praying for a stang.
The "Guetto Glider"

Detail Detail we demand details!!! http://www.mustangworks.com/msgboard/biggrin.gif

------------------
67'fastback- Edelbrock carb, intake, cam, valve springs. Road lifters, Comp Cam rocker arms, windage tray, cerama coated headers, dual flows with H-pipe, modded c-4, tci stall converter, perma cool electric fan, aluminum water pump, griffen aluminum radiator, accel 8.8 cable, wide cap distriburator, magnetic pick up, manley valves, v-matic hurst shifter, edelbrock performer nitrous, carter electric fuel pump, ignitor coil, solid motor mounts, magna racing suspension, poly urathane bushings, und

Ok first of all it wasnt a spirit, it was a 2000 cobra. No no just kiddin haha. well we raced on this stretch of highway out of town and I was able to beat him by bout 1.5 links. It was close for awhile but I came out in front. A really good race in my opinion, but there is a lot that he can do to a chevy 383 stroker to get more horses and the 5.0 is a bit less hopeful in that area. But I am sure that ill stay ahead if I choose to and nothing goes wrong. I dont know much about his car cept its damn weird to have such a big engine in such a damn stupid car. Its the kind of car that you would laugh at but it does have nuts.
what more details do you want? i dont know much else

What do you have, what mods etc.

I have raced several 383 cars a T/A TPI and two carbed camaros. I only lost on one of them and it was a very serious car ezridn was with me when we lost to it. But I beat the other two. They can be bad but some are miss matched.

------------------
1991 Lx sedan 5.0, 5spd, GT-40 Heads, Cobra intake, 73MM mass air, 65mm TB, FPR, 24lb injectors, E303, Headers,off road H-pipe, Flows, K&n , hurst, 3:55's, pullies, etc...
Best ET 13.5 (2.15 60ft)
Best MPH 103.9
On semi-bald street tires
New mods! electric fan, nitto drag radials, mac upper and lower control arms, HD trac-loc, lakewood 50/50's on back, shift light, centerforce dual friction, and rebuilt heavy duty T5

Just imagine the effort it would take to convert a front wheel drive 4/V6 vehicle to a rear wheel drive V8 and have to screw with putting in a rear axle, trans tunnel, screwing with seat clearance....What a headache! That'd make for a killer sleeper though!

there are 38x, 39x and 40x stroker kits for 360s.

chevy 383 stroker. Its in the post.

as far as my mods. I have cobra intake gt-40p's, 1.7rr's, adj fpr, bbk shorties, off road h,65mm tb, 4.10's, aod with shift kit,

soon to have cam and nitrous. Oh yea and my tranny went the other day so its getting rebuilt today. 2nd rebuild in as many months.


-------------------
Semper Fi