rematch with 99 cobra!
 

a couple months ago i raced this guy. well tonight we were lined up at the light again. he takes off burning out so i nailed it too.(i didn't think he wanted another spanking so soon). any ways i pulled from him pretty good in second and then i could tell he shut it down, so i slow down. well the freeway on ramp was coming up. it was one of those almost 360 deg. circle ones. i see him coming on hard.(trying to do a fly by) so i hit it. he couldn't pass me on the outside,(obviously) so he's right on my butt. i drop it to second and started pulling him real bad! at least a couple cars. then we both shut down to much traffic. it was fun. the way it excelerated i don't think he had gears, probably would have been closer. too bad for him.

------------------
96 stang,ported 99 heads, 99 intake, 99 cams,Steeda power pullies,Kirban adj.reg.,Pro-m 87,24#inj.,70mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,iat mod, home depot ram air, k@n,373's,cobra brakes,fms spings, tri-ax shifter.

Nice run, your car has to be running about 105mph now with the mods you have and pullin a new cobra!

Skyler

------------------
-1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows.
12.55@107mph
Going for 11's on 87 octane with A/C and 20+MPG!!!

yea, i'm kind of hoping for at least a 104mph! I guess i'll find out when we go to bakersfield! hopefully it won't be to busy so i can practice, with new combo! i heard they race at night there, that it doesn't open till like 4pm. is that true?

------------------
96 stang,ported 99 heads, 99 intake, 99 cams,Steeda power pullies,Kirban adj.reg.,Pro-m 87,24#inj.,70mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,iat mod, home depot ram air, k@n,373's,cobra brakes,fms spings, tri-ax shifter.

YEAHH!! Night racing would be SOOO much better, the air is better and I just like the night atmosphere.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

I think they do but im not sure. Jesse you should ask over on the LS1 board, I know a lot of those guys head out there quite a bit.

104mph + stickies = 12.9 http://www.mustangworks.com/msgboard/smile.gif

Sky

------------------
-1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows.
12.55@107mph
Going for 11's on 87 octane with A/C and 20+MPG!!!

you got the stickies sky and i hopefully have the 104mph http://www.mustangworks.com/msgboard/smile.gif

------------------
96 stang,ported 99 heads, 99 intake, 99 cams,Steeda power pullies,Kirban adj.reg.,Pro-m 87,24#inj.,70mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,iat mod, home depot ram air, k@n,373's,cobra brakes,fms spings, tri-ax shifter.

[This message has been edited by 46stang (edited 05-04-2001).]