© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
06-24-2002, 12:55 PM | #1 |
Registered Member
Join Date: Mar 2002
Location: Vestal, NY
Posts: 307
|
1/4 Mile Times
Alright, with a stock mustang what kind of 1/4 times should I expect?
My car has 2.73 gears, K&N Cone filter, Nitto NT-450 tires 225/50/16's, Steeda Tri-Ax shifter, and a King Cobra Clutch. Just the other day I beat my friend by half a car against his '76 FireBird with a 350sb. He runs constant 14.8's. I also beat my friend with a 1 car lead, and kept the 1 car on him the whole time, against his '88 Monte Carlo with a 400sb. He runs anywhere from 13.8-14.4 with it. My last question is how accurate are those G-Tech Performance meters? Those are the ones you can plug into your cigarette lighter and it tells you a whole bunch of stuff.
__________________
1989 Mustang 5.0 Conversion, Full Saleen ground effects and spoiler, '94 saleen decal set, '93 Saleen Seats, Black interior from a '93, Steeda quadrant, smog pump delete, a/c delete, Steeda Tri-Ax shifter, '97 rear differential, aluminum driveshaft, 5 lug conversion, '97 rear disc brakes, southside upper and lower control arms, '99 GT Anniversary wheels, flowtech longtubes, flowtech offroad H-pipe, saleen lowering springs, kyb shocks, caster/camber plates |
06-24-2002, 01:12 PM | #2 |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
Your car is a mid-high 14 second car. The G-tech gets the ET pretty close but the MPH are about 3 high.
Later,
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
06-24-2002, 05:58 PM | #3 |
Registered Member
Join Date: Jan 1999
Location: U.S.A.
Posts: 504
|
He is an example with the G-tech.
i ran a 13.58 @ 104 on the track and i had the G-Tech hooked up that run. The G-Tech said i ran a 13.64 @ 108. |
06-24-2002, 07:19 PM | #4 |
Registered Member
Join Date: Nov 1998
Location: Houston, Tx.
Posts: 3,887
|
My G-Tech is about .25 seconds and 5mph optimistic for the 1/4 mile. From what I hear on this board though, mine may be off more than most others.
At near 100mph trap speeds, each car length is about .1 second ET. Rev
__________________
'66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe |
06-25-2002, 08:07 PM | #5 |
Registered Member
Join Date: Mar 2002
Location: Vestal, NY
Posts: 307
|
Well I actually never hooked the G-Tech up to my car. Some kid where we meet had one and I was asking about it. He didn't really know alot about it. He said he just plugs it in, presses a button, and go's when it's set. Kinda weird he didn'ty know anything about them really, might've not been his.
I was actually just wondering about that kinda time becuase I've never been to any drag strips, only runs on the street. My other 2 friends recently went to a strip about 2 hours away during the past couple weekends. I was just looking for something to compare it to. Anyways, I was just wondering what kind of time I should expect running my Stock Stang. Oh yes, 1 last question, say I run constant 15.00's with the 2.73 gears. Any idea what kinda time would drop off If i were using 3.73 gears? thanks again
__________________
1989 Mustang 5.0 Conversion, Full Saleen ground effects and spoiler, '94 saleen decal set, '93 Saleen Seats, Black interior from a '93, Steeda quadrant, smog pump delete, a/c delete, Steeda Tri-Ax shifter, '97 rear differential, aluminum driveshaft, 5 lug conversion, '97 rear disc brakes, southside upper and lower control arms, '99 GT Anniversary wheels, flowtech longtubes, flowtech offroad H-pipe, saleen lowering springs, kyb shocks, caster/camber plates |
06-25-2002, 08:38 PM | #6 |
Registered Member
Join Date: Jan 1999
Location: U.S.A.
Posts: 504
|
Well who knows what u run but here is another GT i use to have.
It was an '87 with 215K on it, cat back, shifter (5 spd), and short belt. I ran 14.4 @ 97 in South Florida August heat last year.
__________________
'86 GT..5 spd....14.0 @ 98 SOLD '87 GT..5 spd...Stock...14.4 @ 97 SOLD '90 GT Conv. A4 Cream Puff...14.6 @ 94 SOLD '99 Z28..A4..Stock stall, no tuning, all motor, full weight 11.92 @ 117.95 SOLD '03 Centennal Edition GT 5 spd. 1 of 620 5 spd coupes made. http://bradbarnett.net/mustangs/timeline/99-04/03/100th.htm Stock..... 2.02 8.9 13.89 @ 99.03 http://bradbarnett.net/mustangs/timeline/99-04/03/100th.htm |
06-26-2002, 07:27 AM | #7 |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
Lower gears are not always gonna knock off time right away. When my car was stock I went from a 15.2 to a 15.4 after I went to 3.73 gears.
My mph improved but I had way too much wheel spin. After I got Nitto's though I dropped to a 14.9. Later,
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
06-26-2002, 09:59 AM | #8 |
Registered Member
Join Date: Jan 1999
Location: Sugar Land, Tx USA
Posts: 478
|
With traction you should be able to drop down to at least a 14.6 or .4 off your times i'd say.
|
06-26-2002, 09:09 PM | #9 |
Registered Member
Join Date: Apr 2002
Location: Canada
Posts: 27
|
With my car stock I ran a 14.9 @ 93.3mph after 3.73's I ran a best of 15.2 @ 95.5mph but with slicks I got up to 13.9 @ 95.8mph very hard to launch with normal radials.
__________________
90 LX H-pipe, Long tubes, 351 D00E Heads ported and polished, 3.73 gears, Holley air filter, Holley 155lph pump, sub frame connectors, 2 chamber flowmaster cat backs, cold air induction, under drive pulleys, Hurst Ripper shifter, Compucar EFI system (50 to 150hp), all on top of a pair of 26*8.5 Mickey thompsons. 12.81 at 110mph |
06-26-2002, 11:22 PM | #10 | |
Registered Member
Join Date: Feb 1999
Location: Indianapolis, IN
Posts: 963
|
Quote:
__________________
04 Screamin Yellow Cobra KB 2.4 (585/556 pump 626/666 race) 00R brakes, DFX clutch, Level 5's, return fuel system, Lts with 3" exhuast, FR500 wheels and all the other fun stuff. GONE 1991 Lx sedan 5.0, 5spd (Liberty proshifted TKO) S-trim, Ported TF heads everything parted out. |
|
06-27-2002, 12:15 PM | #11 | |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
Quote:
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
|
06-30-2002, 08:57 PM | #12 |
Registered Member
Join Date: Apr 2002
Location: Canada
Posts: 27
|
My best 60ft. was a 2.524 I had 225/60/15s on.
__________________
90 LX H-pipe, Long tubes, 351 D00E Heads ported and polished, 3.73 gears, Holley air filter, Holley 155lph pump, sub frame connectors, 2 chamber flowmaster cat backs, cold air induction, under drive pulleys, Hurst Ripper shifter, Compucar EFI system (50 to 150hp), all on top of a pair of 26*8.5 Mickey thompsons. 12.81 at 110mph |
07-01-2002, 10:12 AM | #13 |
Rebel Fleet Commander
Join Date: Oct 2001
Location: Huber Heights, OH
Posts: 1,003
|
When I fist got my car it had a cone K&N filter. Thats it, 2.73 gear, stock cat pipe, you name it. Got it to run a best of a 14.50 @95 and even got a 1.99 60 ft. But that was everything it had. Cant say much for the g-tech because i have never seen one. (probley a reason for that)
__________________
1993 Mustang GT, PTK w/ T-64 - My Cardomain Webpage 11.25@123.5 on only 8 psi. 10.84@121 on only 1 headgasket "The Truth is, Your the Weak, and I am the Tyranny of Evil Men!" |
07-02-2002, 05:10 PM | #14 |
Registered Member
Join Date: Apr 2002
Location: racine ,wi
Posts: 691
|
when my old 87lx was stock minus the cat back
15.06 93mph 2.2 60ft (hard as hell fireblown 225---15s)
__________________
RUN IT STAIGHT AND RUN IT HARD ________ Novi 2000 60' 1.46 1/4 10.67 mph 126.5 _________ |
07-03-2002, 01:02 PM | #15 |
Registered Member
Join Date: Mar 2002
Location: Vestal, NY
Posts: 307
|
Messing People Up
Well anyways I've never been to a Strip anyways. I wanna just get out and see what it can do before I start doing stuff to it. We do have a 1/8 here, but the track is pretty messed up.
Anyways, this car keeps suprising me more and more. I just raced my friend in his '86 Z28 Camaro. Auto, headers, 3.08's, K&N, no cats, flowmaster....lol just one..hehe, shift kit, pulleys, and I think that's all...oh..he went to a new MAF but still has the stock size. Anyways, we went to race, pulled over on the road, waited for the light. We got to race, but it was crap. We just got to the light like 5 secs before it turned green, and obviously he got the jump on me while I was trying to watch the other light, which was red when i looked up at it. I pulled massively on him in 2nd gear and ended up beating him by about a car length. I know it could've been more if i actually got a good start. You guys got any more tips for me? I've been launching at about..2300-2500 rpms and found that i get a really good launch at about 2300. Shifting at 5400, at least that's what the factory tach shows. And I don't powershift, kinda afraid I'd screw something up bad. Any tips would be appreciated.
__________________
1989 Mustang 5.0 Conversion, Full Saleen ground effects and spoiler, '94 saleen decal set, '93 Saleen Seats, Black interior from a '93, Steeda quadrant, smog pump delete, a/c delete, Steeda Tri-Ax shifter, '97 rear differential, aluminum driveshaft, 5 lug conversion, '97 rear disc brakes, southside upper and lower control arms, '99 GT Anniversary wheels, flowtech longtubes, flowtech offroad H-pipe, saleen lowering springs, kyb shocks, caster/camber plates |
07-04-2002, 12:18 PM | #16 |
Registered Member
Join Date: Jun 2002
Location: Dover, Delaware...Ft.Pierce, Florida...Hiawassee, Georgia...Las Vegas, Nevada.
Posts: 90
|
My best 60' is 2.19 with 3.55's and a stock 8.8 Trac Loc.I wish I had ET to match, I am more than 1.5 sec off at that 60'. I have been told by my 5.0 friends its just a Very hard leaving Car and it all seems to work,Throttle response and suspension wise.Remember, ET = Hooking and get up and go + HP and FTLBS of course, But MPH = HP!! I guess thats why I am under 90 Mph. --------5,400 shifts points are fine, I take mine to 5k with no worries and I am alot slower than you.IF you went to 3.73's you will think you put on a little NOS kit,do it.
|
07-04-2002, 01:20 PM | #17 |
Registered Member
Join Date: Jun 2002
Location: NJ
Posts: 13
|
MY CAR WENT 13.9 W/JUST LONG TUBE HEADERS,H-PIPE,STOCK MUFFLERS AND 355 GEARS WITH AN AUBURN POSI UNIT.....NOW IT GOES 13.30'S W/SOME MINOR MODS......BEST 60 FT WAS 1.8....W/DRAG RADIALS....I RAN A 13.4 AT 98MPH MISSING 4TH.....BEWARE..SLICKS AND STOCK 28 SPLINE AXLES DONT MIX........
__________________
LIVE YOUR LIFE A 1/4 MILE AT A TIME |
07-05-2002, 10:34 PM | #18 |
Get down.....
Join Date: Apr 2001
Location: Room 103
Posts: 2,095
|
rookie
now i know my 60 ft times are terrible(spinning), cause i was running on Starfire 225/60/15's (cheap tires) and this is my very first time racing. i was new to the whole thing. my mods are in my sig.
oh BTW, check out the temperature i was running at! is that a good time for that heat? i know i need DR's! how is my reaction time for a beginner? seriously i dont know! Rosco, MOMS is coming up soon. maybe you should go!
__________________
Cobra brakes are on! Finally..... ------------------------------------------------ |
07-06-2002, 08:02 AM | #19 |
Registered Member
Join Date: Jun 2002
Location: NJ
Posts: 13
|
not bad..but i think you should prolly at leastof done a 14.0.....try leaving the line at about 2 grand.....if you spin..try 1700..and on down.....if at 2 g's your car goes out then nose dives..try a higher rpm.....with dr's im leaving at 5500....how hot was the temp of your car?......mineusually doesnt get past 180.....well....it was at 200 on wed or something..but thats cause i was on it goin down the highway in 100 degree temps..lol..and ive never run at cecil..but some people say they ran faster there than at atco......i dunno tho...as for your reaction time..500 is a perfect light....but if your 1st pass..not bad..but wake up .......im usually like 569 lights now....and ive only raced like a total of 12 times in my life......less spinning of your wheels will def help you in your 60 ft times.....if anybody else has opinions on this..reply back....in case any1 thinks im steering him wrong since im somewhat of a newbie to racing myself
__________________
LIVE YOUR LIFE A 1/4 MILE AT A TIME |
07-06-2002, 11:15 AM | #20 |
Registered Member
Join Date: Jun 2002
Location: Dover, Delaware...Ft.Pierce, Florida...Hiawassee, Georgia...Las Vegas, Nevada.
Posts: 90
|
You are 100% correct,BADAZZ89LX. You see spinning in the ET,ie: 60'. Mph is Not changed that much at all by spinning.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1/4 mile times? | chiaronate | Windsor Power | 33 | 11-01-2003 10:48 AM |
raced a Supra Twin Turbo | Stang35th | Stang Stories | 63 | 08-23-2003 12:36 AM |
bought nitros!!! expected 1/4 mile times??? | 1jimmy__d | Windsor Power | 25 | 07-15-2002 08:30 PM |
Quarter mile times | 67 Demon | Classic Mustangs | 11 | 05-30-2002 12:40 AM |
new 1/8 mile times | hippi97 | Windsor Power | 1 | 05-06-2001 06:32 AM |