LOW COOLANT light keeps coming on

04-14-2002, 12:18 AM

The low coolant light in my 95 gt keeps coming on. I check the coolant and its at the hot mark everytime. One time it wasnt and was low but i filled it and the darn light keeps coming on. Do i have to reset the light after i fill the container?

avbcon12 · 04-14-2002, 07:57 AM

im not sure if they are the same for 95's but in the coolant overflow can is the sensor. if the the 2 contacts get all corroded they will not make contact with each other. so pull the sensor and use sandpaper to clean the contacts off. that should solve your problem (hopefully) if you have the same setup.

take care,
adam

moc · 04-14-2002, 09:26 PM

avbcon12 ,you are correct .. I have in past shot it with castrol super clean ,and it seems to be okay for about a year . sand paper is cool ,but don't be to crazy with it .. it has a corrosion on
it. and a cleaner like super clean will remove it with no problem.. when you have a stang like mine ,that may sit for a while ,you don't want to be sanding on it for 12 yrs.

04-14-2002, 12:18 AM	#1
Mustang Cain Guest Posts: n/a	LOW COOLANT light keeps coming on The low coolant light in my 95 gt keeps coming on. I check the coolant and its at the hot mark everytime. One time it wasnt and was low but i filled it and the darn light keeps coming on. Do i have to reset the light after i fill the container?

04-14-2002, 07:57 AM	#2
avbcon12 Registered Member Join Date: Jul 2001 Location: West Bloomfield, MI Posts: 391	im not sure if they are the same for 95's but in the coolant overflow can is the sensor. if the the 2 contacts get all corroded they will not make contact with each other. so pull the sensor and use sandpaper to clean the contacts off. that should solve your problem (hopefully) if you have the same setup. take care, adam __________________ 90 GT black/ grey leather ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc.... http://avbcon12.stangnet.com

04-14-2002, 09:26 PM	#3
moc Registered Member Join Date: Mar 1999 Location: Ocean City , Maryland Posts: 344	you are correct avbcon12 ,you are correct .. I have in past shot it with castrol super clean ,and it seems to be okay for about a year . sand paper is cool ,but don't be to crazy with it .. it has a corrosion on it. and a cleaner like super clean will remove it with no problem.. when you have a stang like mine ,that may sit for a while ,you don't want to be sanding on it for 12 yrs. __________________ 1991 5.0 NotchBack,Black as of 05/04/09 34,300mi. 2001 LIGHTNING Black 29,872 mi. 05/04/09 (Hangar Queen) SMOKEM UP

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Coolant coming from bellhousing??	surfbeast	Modular Madness	4	11-20-2003 03:58 PM
Low Coolant Light Keeps Coming On?	jdlatil	Windsor Power	4	02-03-2003 04:13 AM
Low Coolant Light	TwiLighTBluEGT	Windsor Power	6	08-11-2002 09:55 AM
Radiator/Coolant check light coming on when racing	bark3rd	Modular Madness	2	07-13-2001 09:56 AM
Low Coolant Light	RMARIANI	Windsor Power	5	06-10-2001 10:00 PM