![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#21 |
Registered Member
Join Date: Apr 2001
Location: Bowling Green, KY
Posts: 95
|
![]() Dark Knight: The weather was about 3 degrees cooler (74) and the humidity was 100% both times. Of course tonight it's 60 degrees and 70% humidity.
![]() I believe the slicks were 1/2 inch taller. They were Hoosier 26x9's. Badazz89LX: I had just installed a 31 spline Eaton w/Superior axles along with the 4.10's. There was no way I was going to use slicks w/stock axles. A friend of mine twisted the end off a stock axle on Nitto's two weeks ago!! I have heard good/bad about the chips. The over-the-counter chips are crap, but I have heard good things about custom chips that are burned while on the dyno. There is no doubt I will make 12's pretty easily. I should be able to the 60' down in the 1.7 range when I get a few things sorted out (transmission, control arms, driving ability,etc.) Plus my torque boxes weren't in real great shape before last night, so they're probably in really bad shape now! I'm shooting for 12.80's when I get everything sorted out.
__________________
'90 Black Notch: TFS TW heads, Stage 1 Cam, Street Intake, FMS 1.6 rockers, Kirban AFPR, 24# injectors, C&L 76mm MAF, 70mm Accufab TB/EGR, Tremec 3550, SPEC Stage 2 & Billet Flywheel, Alum DS, 4.10's w/ 31 Spline Eaton, Full MAC exhaust, etc. 286.7 RWHP @ 5100rpm, 313.7 TQ w/stock MAF, Inj, TB, and no tune Race weight : 3090 # w/ driver New Best - 12.82@107.9 w/1.74 60' |
![]() |
![]() |
![]() |
#22 |
Registered Member
Join Date: Jun 2002
Location: NJ
Posts: 13
|
![]() you should be low to mid 12's with your mods.....i have similiar mods and im goin 13.2's..gettin my heads on soon....i was told when i get my heads and my 373's put in..ill be mid 12's at worst....and i believe you got a tad bit more done...so if its tuned right..yours should be a lil faster if not the same as mine
![]()
__________________
LIVE YOUR LIFE A 1/4 MILE AT A TIME |
![]() |
![]() |
![]() |
#23 |
Registered Member
Join Date: Nov 2000
Location: Maryland
Posts: 123
|
![]() Our engine combos produce about the same power. The heads are the same, the specs on our cams are about the same and the intakes are close in performance.
I recently switched from 3.08s to 4.10s. The mph stayed the same but I lost a tenth; probably due to the extra wheel spin through the first 2 gears. I think your numbers will improve once you get an after market tach. The factory tach is way "off" in the upper rpms (over 5000). As an example, 5500 rpms on my autometer is equivalent to 6200 rpms on the factory tach. I shift at 5700 on the autometer tach and the factory tach needle is buried in the red and I still don't trip the limiter. So probably still short shifting with the factory tach. Good luck!
__________________
'91 Notchback TFS Heads(stage 2), B-451 Cam, V2-Si trim, TKO-600 |
![]() |
![]() |
![]() |
#24 |
Registered Member
Join Date: Jun 2002
Location: NJ
Posts: 13
|
![]() my tach is off at 2000 rpm....factory tachs blow azz
![]()
__________________
LIVE YOUR LIFE A 1/4 MILE AT A TIME |
![]() |
![]() |
![]() |
#25 |
Registered Member
Join Date: Oct 1998
Location: Az
Posts: 854
|
![]() running that high of fuel pressure means that you should probably step up to a bigger injector...you're having to increase the pressure to make up for lack of flow...
![]()
__________________
84 convt,roller 302,AFR's, performer 3.55's, underdrives BBK shorties stock cam, 1.7's 13.58@102.84 and a '68 stang .. project 8 sec street car... 557 big block + N20 :-) http://members.cox.net/darkknight302/68nwrear.jpg |
![]() |
![]() |
![]() |
#26 | |
Registered Member
Join Date: Jun 2002
Location: NJ
Posts: 13
|
![]() Quote:
WHO IS THAT MEANT FOR?
__________________
LIVE YOUR LIFE A 1/4 MILE AT A TIME |
|
![]() |
![]() |
![]() |
#27 |
Registered Member
Join Date: Apr 2001
Location: Bowling Green, KY
Posts: 95
|
![]() AJstang:
That's an awesome MPH! Do you have 24#'ers? If so, what is your FP set at? Also, do you have the 51014 cam? My car had that cam in it when I bought, but I was told it was a E-303, so I bought the Stage 1. Both cams are very similar in specs, and I would have kept the Lunati if I had known. I'm probably going to get a new tach next week. So many things to buy, so little money!! Transmission, clutch, tires, gauges, control arms, drag-launch kit, hhmmmmm what else?? ![]() By the way, has anybody else noticed the ad in 5.0 Mustang for Strange's adjustable shocks and struts? 10-way adj. struts for $111 a piece, QA1's=$230. Helluva deal! Just wondering.
__________________
'90 Black Notch: TFS TW heads, Stage 1 Cam, Street Intake, FMS 1.6 rockers, Kirban AFPR, 24# injectors, C&L 76mm MAF, 70mm Accufab TB/EGR, Tremec 3550, SPEC Stage 2 & Billet Flywheel, Alum DS, 4.10's w/ 31 Spline Eaton, Full MAC exhaust, etc. 286.7 RWHP @ 5100rpm, 313.7 TQ w/stock MAF, Inj, TB, and no tune Race weight : 3090 # w/ driver New Best - 12.82@107.9 w/1.74 60' |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
New Track times On the good old SD and STOCK Short block | Stang Runner | Stang Stories | 1 | 10-10-2002 06:25 PM |
First track times ever, pathetic or respectable? | TRIXIE | Racer's Club House | 11 | 09-18-2001 10:18 PM |
Track Times | 86GT | Stang Stories | 6 | 07-29-2001 04:20 PM |
Need advise/help on track times | joey50gt | Windsor Power | 0 | 05-19-2001 04:54 PM |
Track times are these good? | Brady91 GT | Windsor Power | 14 | 04-29-2001 11:29 PM |