© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
Thread Tools | Rate Thread | Display Modes |
05-15-2005, 02:03 PM | #1 |
N-V-ME
Join Date: May 2005
Location: SOUTHFIELD,MICHIGAN
Posts: 155
|
I Wipped On A Cobra With A 2 Bbl Carb An E Cam An 3.55 Gears...
Hey Guys I Got A Story To Tell First Ima Tell You The Mods To My Motor 2 Bbl Carb. Motorcraft,e 303 Cam An E7's No Exaust Bumps, 3.55 Gears: Vs. A 95' Or 96' Cobra ,ha Funny At The Light He Was Reving His Motor So The Light Turned Green .......jumped Out Three Cars On Him .......he Eventaully He Caught Up An Passed Me One Car Before The Next Light ........when We Got To The Next Light I Told Him I Had A 2 Bbl Carb He Felt Stupid..........
|
05-17-2005, 04:17 PM | #2 |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
Re: I Wipped On A Cobra With A 2 Bbl Carb An E Cam An 3.55 Gears...
I am sure it was a 94-95 cobra. They are slow.
It is nice to win when you are the underdog though.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
05-23-2005, 01:34 PM | #3 |
Registered Member
Join Date: Feb 2005
Location: connecticut
Posts: 11
|
Re: I Wipped On A Cobra With A 2 Bbl Carb An E Cam An 3.55 Gears...
hey guys got a question right now my stang is runing the factory 10 btdc i want to change the timing but im not sure what i can safely set it at. any help would be apreciated.thanks
|
05-23-2005, 01:44 PM | #4 |
N-V-ME
Join Date: May 2005
Location: SOUTHFIELD,MICHIGAN
Posts: 155
|
Re: I Wipped On A Cobra With A 2 Bbl Carb An E Cam An 3.55 Gears...
I Beleive Its 14 Degrees Btc First Mark A Line On Your Dis. An Block Cas If Al Else Fails You Can Go Back To Your Original Spot,,,,,, Unloosen Your Dis. Bolt A Little Some So That Its Snug But Can Still Turn It Start Your Car Turn It Just A Little 1/8 At A Time ....if You Hear Any Knocking Than Go Back Some Untill It Stops And You Should Be At Your Limit And Make Sure You 89 An Up Octane Or You Will Knock Like Crazy...........
__________________
88' LX MUSTANG: LINCOLN ROTORS , AIR SUSPENSION FRONT AND REAR, SUBFRAMES, ROLL CAGE, 92' BLOCK, MSD 6AL, ACCEL 8.8 WIRES, ACCEL COIL, EDELBROCK F4B INTAKE (PORTED),2 IN. 4 HOLE SPACERS, HOLLEY 600 CARB.,HOLLEY BLUE FUEL PUMP AN REGULATOR, E 303 (.498 IN. 220 DUR.) CAM, (.535 IN. OF LIFT W/ 1.72 SCORPIN ROLLER ROCKERS), PORTED E7'S, FLOWTECH 1 5/8 LONG TUBE HEADERS, 2 1/2 IN. H PIPE, 2 CHAMBER FLOWMASTERS WITH 3 IN.DUMPS, T-5, 3.73 GEARS, 5 LUG AEROSTAR AXELS, 245-45-17 96' COBRA WHEELS |
05-23-2005, 01:54 PM | #5 |
Registered Member
Join Date: Feb 2005
Location: connecticut
Posts: 11
|
Re: I Wipped On A Cobra With A 2 Bbl Carb An E Cam An 3.55 Gears...
thanks for the help ill try adjusting it thisafternoon
|
05-24-2005, 11:58 AM | #6 | |
Guest
Posts: n/a
|
Re: I Wipped On A Cobra With A 2 Bbl Carb An E Cam An 3.55 Gears...
Quote:
Last edited by Simi Stang; 05-24-2005 at 12:21 PM.. |
|
05-24-2005, 12:22 PM | #7 |
N-V-ME
Join Date: May 2005
Location: SOUTHFIELD,MICHIGAN
Posts: 155
|
Re: I Wipped On A Cobra With A 2 Bbl Carb An E Cam An 3.55 Gears...
Sorry Buddy It Was A Fare Race If We Were Racing 1/8 Th Mile Than I Beat Him He Was Tryn To Race Me ,reving His Motor At The Light An Lookn At Me ,so Light Turned Green And Off I Went ,,,,,,,think That Was Pretty Good For A 2700 Lb.car From The Factory Minus Sway Bars,power Str., Ac, Condenser, All Hardware That I Didnt Need Including The Rear Seat,,,,, But That Was Then An This Is Now............
__________________
88' LX MUSTANG: LINCOLN ROTORS , AIR SUSPENSION FRONT AND REAR, SUBFRAMES, ROLL CAGE, 92' BLOCK, MSD 6AL, ACCEL 8.8 WIRES, ACCEL COIL, EDELBROCK F4B INTAKE (PORTED),2 IN. 4 HOLE SPACERS, HOLLEY 600 CARB.,HOLLEY BLUE FUEL PUMP AN REGULATOR, E 303 (.498 IN. 220 DUR.) CAM, (.535 IN. OF LIFT W/ 1.72 SCORPIN ROLLER ROCKERS), PORTED E7'S, FLOWTECH 1 5/8 LONG TUBE HEADERS, 2 1/2 IN. H PIPE, 2 CHAMBER FLOWMASTERS WITH 3 IN.DUMPS, T-5, 3.73 GEARS, 5 LUG AEROSTAR AXELS, 245-45-17 96' COBRA WHEELS |
05-24-2005, 06:41 PM | #8 | |
Guest
Posts: n/a
|
Re: I Wipped On A Cobra With A 2 Bbl Carb An E Cam An 3.55 Gears...
Quote:
Let me explain...let's say I raced a Dodge Viper, or some built to hell big block muscle car. I get a killer start and jump out some 3 or 4 car lengths because the other guy is spinning. He's got more power than me, & maybe he can't drive all that well. I hold him off until like 70 or 80mph. Then he catches up and blows right by me. By the time I'm at at 90mph he's got me by 3 car lengths or so. Do you still think I won the race? Because I didn't...in this make believe race...I just got a better start, but in the end...I lost the race. It's one thing to post about your race...but to say you won...or "whipped the Cobra" would be incorrect. So again, you hardly whipped on the Cobra. If he was ahead of you by the end of the race he won, you lost...you just got a better start...plain and simple. |
|
05-24-2005, 08:18 PM | #9 |
Registered Member
Join Date: Apr 1999
Location: penfield, ny, u.s.
Posts: 78
|
Re: I Wipped On A Cobra With A 2 Bbl Carb An E Cam An 3.55 Gears...
i agree...most stangs can beat anything off the lineup to 60 -70 or so...i kill mostly all cars by me and i hardly have anything done to my car...
__________________
'89 lx 5.0-FLowmasters, H-pipe with cats, 373's, pulleys, BBk headers Best 1/4 mile- 14.1 @98 mph (67 deg. 90+ humidity) Married and bought the new mods... Nitto DR's 245/50R16 NOS hopefully 100 shot |
05-24-2005, 08:19 PM | #10 |
Registered Member
Join Date: Apr 1999
Location: penfield, ny, u.s.
Posts: 78
|
Re: I Wipped On A Cobra With A 2 Bbl Carb An E Cam An 3.55 Gears...
i agree...most stangs can beat anything off the lineup to 60 -70 or so...i kill mostly all cars by me (off the start) and i hardly have anything done to my car...Most cars also will chase me down and pass me like im standing still
__________________
'89 lx 5.0-FLowmasters, H-pipe with cats, 373's, pulleys, BBk headers Best 1/4 mile- 14.1 @98 mph (67 deg. 90+ humidity) Married and bought the new mods... Nitto DR's 245/50R16 NOS hopefully 100 shot |
05-24-2005, 09:42 PM | #11 |
N-V-ME
Join Date: May 2005
Location: SOUTHFIELD,MICHIGAN
Posts: 155
|
Re: I Wipped On A Cobra With A 2 Bbl Carb An E Cam An 3.55 Gears...
Ok ,,,,,once Agian Let Me Tell You There Were Four Lights In Total From Start To Till The Time We Slowed Down An Talked,,,he Reved His Motor An Nodded At Me To Race So The Light Turned Green,,,had Three Cars From The Jump Didnt Say He Caught Up Till After The Race Was Over------------we Raced To The Second Light , Then He Caught Up After I Let Off The Gas ,,,,there Fore Meaning I Won ,,,then We Stoped At The Fourth Light It Was Red Then I Told Him What He Got Beat With Is That Clear Enough For You..............now Lets Say Me An You Were At A Light An You Reved Your Motor---wouldn't You Be Ready To Race,,,same Thing With Him He Was Ready He,,,,no Driver Error He Just Got Whipped
__________________
88' LX MUSTANG: LINCOLN ROTORS , AIR SUSPENSION FRONT AND REAR, SUBFRAMES, ROLL CAGE, 92' BLOCK, MSD 6AL, ACCEL 8.8 WIRES, ACCEL COIL, EDELBROCK F4B INTAKE (PORTED),2 IN. 4 HOLE SPACERS, HOLLEY 600 CARB.,HOLLEY BLUE FUEL PUMP AN REGULATOR, E 303 (.498 IN. 220 DUR.) CAM, (.535 IN. OF LIFT W/ 1.72 SCORPIN ROLLER ROCKERS), PORTED E7'S, FLOWTECH 1 5/8 LONG TUBE HEADERS, 2 1/2 IN. H PIPE, 2 CHAMBER FLOWMASTERS WITH 3 IN.DUMPS, T-5, 3.73 GEARS, 5 LUG AEROSTAR AXELS, 245-45-17 96' COBRA WHEELS |
05-25-2005, 10:49 AM | #12 | |
Guest
Posts: n/a
|
Re: I Wipped On A Cobra With A 2 Bbl Carb An E Cam An 3.55 Gears...
Ok, I stand corrected then. You failed to mention that in any of your posts until now. Infact, here's your exact quote.
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What's the Difference between 95 GT and 95 Cobra | Ron Brooks | Windsor Power | 14 | 05-25-2005 04:43 PM |
3.55 gears vs rpms | XBAJBUSX | Windsor Power | 9 | 10-28-2004 08:02 PM |
Awesome,Fast Paced Night. 7 Mustangs and one 99 Z28 6spd. I Toast a 94 Cobra. | Mercury | Stang Stories | 7 | 10-30-2001 01:08 PM |
new carb..but how much cfm?? | 69PonyRider | Classic Mustangs | 4 | 09-13-2001 07:59 AM |
First race since 3.55s installed! (Smoked a Cobra twice.) | Fox Body | Stang Stories | 11 | 03-04-2001 06:12 PM |