MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Website Community > Stang Stories
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 08-22-2006, 08:00 PM   #1
johnwb
88lx work in progress
 
johnwb's Avatar
 
Join Date: Jul 2005
Location: canada
Posts: 62
Default No traction,sucks

The Lx I have been working on is complete,It was a 4cly body that I introduced a 1990 5.0l,(I still need to add the engine mods to my profile)anyway it has 3.73s with a 5 speed and a one wheel peel,lol last weekend I was pretty dissapointed I ran a 14.9 at 93mph 1/4 mile time.
my 60 feet was in the 3 second mark I was spinning pretty much the length of the track,mad as I was I over reved the f#$$ thing and dropped a valve,anyway I think I will weld the 7.5 rearend solid and try slicks,I think i can run mid 13s next time.

I have $2,000 total investment in this car,lol,I'd like to see a ricer pull that one off.

also where might I find a set of gt40 heads or something similiar.

Last edited by johnwb; 08-22-2006 at 08:24 PM..
johnwb is offline   Reply With Quote
Old 10-15-2006, 01:52 PM   #2
Coupe50h
Registered Member
 
Coupe50h's Avatar
 
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
Default Re: No traction,sucks

Im surprised this thread has not been moved?
Well any rate, I wouldnt waste money on gt-40's, I have some ported i been running, for the price they are not bad, i paid like 300 for em, but would rather have some aluminum heads
The one wheel peel means your trak lok needs a rebuild, (assuming the 7.5 is similar) the clutch paks can be bought at a ford dealer for about 70$, I did it myself but should be done in a shop if you never done any rearend work.
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's.
race weight 3,160

12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear

13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear
Coupe50h is offline   Reply With Quote
Old 10-16-2006, 01:12 PM   #3
blue00gt
Mustang Addict
 
blue00gt's Avatar
 
Join Date: Jan 2001
Location: McKinney, TX
Posts: 1,294
Default Re: No traction,sucks

The 7.5" rear is not a Trak-Loc diff. You should be able to pick up a used 8.8" for not too much money. I got a junkyard one for my '79 for $100 and just put in some new gears, bearings and seals.
That 7.5" will probably break if you try to launch with slicks.
__________________
Strike down the unroadworthy!
2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more
'94 Rio Red Cobra: All the bolt-ons, 3.73s
blue00gt is offline   Reply With Quote
Old 10-16-2006, 07:09 PM   #4
rwhite65
Ride Hard
 
rwhite65's Avatar
 
Join Date: Oct 2000
Location: Wyoming IL
Posts: 1,094
Default Re: No traction,sucks

Welding it up will get you the traction for a while, but I agree the 7.5 is not probably gonna hold with a set of slicks for long.
Ryan
__________________
65 Fastback 91 roller 306, H/C/I
AOD-Bauman, PI Stallion, 4.10's and traction loc

04 Grand Cherokee Freedom Edition

79 Ford F-250 4x4 - Restored
rwhite65 is offline   Reply With Quote
Old 10-26-2006, 01:28 AM   #5
bmxmon
Registered Member
 
bmxmon's Avatar
 
Join Date: Mar 2004
Location: Minnesota
Posts: 950
Default Re: No traction,sucks

run it till she blows man
__________________
Alex
bmxmon is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:15 PM.


SEARCH