2nd ET's with new motor

fiveOguy20 · 10-11-2002, 08:32 PM

well my last ET's were 13.7's at 103 on street tires.. tonight i did much better with a best run at 13.2 at 107

on street tires with a 2.19 60 ft.

347, Bcam, full MSD, 1.6 crane roller rockers, pullies, equal length shorties, air-gap intake, 735 holley, 2 chamber flows, 3.27 gears

HotRoddin · 10-11-2002, 11:37 PM

Very good !! and with 60' times like that and 3.27 gears you have a ton of room for improvement !

Skyman · 10-12-2002, 09:37 PM

What heads do you have?

Skyler

Nitrous Al · 10-12-2002, 09:42 PM

Five0guy20 - What happened to the last motor?
Skyman - How's your car running?

fiveOguy20 · 10-12-2002, 10:22 PM

i got the GT-40 aluminums with some port work.

it runs really good just need a gear an slicks

Skyman · 10-14-2002, 03:26 AM

Its running good, I really should take it back to the track agian before I finally gettin to cuttin the cage and all. Id like to look for a 10second slip once on the big shot of n20.

Skyler

Skyman · 10-14-2002, 03:27 AM

I would swap to a 1.72 rocker, you'll pick up 15-20rwhp.

Ive seen 12-15rwhp on a 302 w/ heads/Bcam/intake.

Skyler

Ackbar00 · 10-14-2002, 07:35 AM

I would check something. My car has went a 109MPH in the 1/4 and its a 100,000 mi Stock short block with the stock cam. I would think with a 347 you should have a bit more MPH than 107.

10-11-2002, 08:32 PM	#1
fiveOguy20 Registered Member Join Date: Sep 2002 Posts: 156	2nd ET's with new motor well my last ET's were 13.7's at 103 on street tires.. tonight i did much better with a best run at 13.2 at 107 on street tires with a 2.19 60 ft. 347, Bcam, full MSD, 1.6 crane roller rockers, pullies, equal length shorties, air-gap intake, 735 holley, 2 chamber flows, 3.27 gears

10-12-2002, 09:37 PM	#3
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	What heads do you have? Skyler __________________ 2001 BMW M3 6spd 12.79@108 RIP ---- 1993 Notch w/ 98 4V 4.6 Fasttt... -1989 Saleen Mustang #406- 12.32@109 -1999 Black Cobra Coupe- JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.

10-14-2002, 03:26 AM	#6
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Its running good, I really should take it back to the track agian before I finally gettin to cuttin the cage and all. Id like to look for a 10second slip once on the big shot of n20. Skyler __________________ 2001 BMW M3 6spd 12.79@108 RIP ---- 1993 Notch w/ 98 4V 4.6 Fasttt... -1989 Saleen Mustang #406- 12.32@109 -1999 Black Cobra Coupe- JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.

10-14-2002, 03:27 AM	#7
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	I would swap to a 1.72 rocker, you'll pick up 15-20rwhp. Ive seen 12-15rwhp on a 302 w/ heads/Bcam/intake. Skyler __________________ 2001 BMW M3 6spd 12.79@108 RIP ---- 1993 Notch w/ 98 4V 4.6 Fasttt... -1989 Saleen Mustang #406- 12.32@109 -1999 Black Cobra Coupe- JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.

10-14-2002, 07:35 AM	#8
Ackbar00 Rebel Fleet Commander Join Date: Oct 2001 Location: Huber Heights, OH Posts: 1,003	I would check something. My car has went a 109MPH in the 1/4 and its a 100,000 mi Stock short block with the stock cam. I would think with a 347 you should have a bit more MPH than 107. __________________ 1993 Mustang GT, PTK w/ T-64 - My Cardomain Webpage 11.25@123.5 on only 8 psi. 10.84@121 on only 1 headgasket "The Truth is, Your the Weak, and I am the Tyranny of Evil Men!"

10-11-2002, 11:37 PM	#2
HotRoddin cranky old man Join Date: Sep 2001 Location: Longview Texas Posts: 683	Very good !! and with 60' times like that and 3.27 gears you have a ton of room for improvement !

10-12-2002, 09:42 PM	#4
Nitrous Al Registered Member Join Date: May 2000 Location: Everett, MA Posts: 417	Five0guy20 - What happened to the last motor? Skyman - How's your car running?

10-12-2002, 10:22 PM	#5
fiveOguy20 Registered Member Join Date: Sep 2002 Posts: 156	i got the GT-40 aluminums with some port work. it runs really good just need a gear an slicks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Built Motor? Questions	Rosco	Windsor Power	1	10-22-2003 01:12 AM
Non-H.O Motor question(s)?........	gtsr515	Windsor Power	2	02-01-2003 10:33 AM
Rebuilding an engine.. and then some	Halz	Windsor Power	5	04-01-2002 02:01 AM
What year and type of motor do I have..	Smokedawg	Windsor Power	18	08-15-2001 05:08 PM
GT-40p headed motor	89 Cobra LX	Windsor Power	5	06-15-2001 06:46 PM