Rev! You saw an Auto 99GT+ run 14.2... - Page 2

90dpscoupe · 05-25-2001, 01:08 AM

sloaod, do you maybe have a manual rack steering? well anyway this car must pull pretty good topend, my car with stock exhaust and stock motor except coldair and fan, ran 13.91 @ 98 mph, 1/8 was 8.8 @80.? 2.0 60' on that run, so what is yout secret? i want 103 mph traps, that should put me around 13.4-5

thats cool though, those times will give some stocker ls1's a hard time, i know my 1.9 60 i cut left a 01 t/a chasing this ford, but he did catch me at the top

it's cool, they are pretty shocked to see that my car has stock heads, cam, and internals.

------------------
90 lx coupe: Mac cold air fenderwell, accel supercoil,ADS chip (not yet track tested),3-core radiatr, FMS alum D/S, Black magic fan, 3.27grs, 3chbr flows.
Best time: 13.9116(on 225/60/15 firehawks)
Best mph: 98.17
Best 60': 1.9607

next mods: subframes, mac h-pipe

TheSloAod · 05-25-2001, 08:16 AM

1-800-JENNY
manual steering, lack of smog equipment, whats a front swaybar?, draglites, no heavy insulation covering the spare tire, but i have added subframes. the car has a stock shortblock, nothing has been cleaned up either. i think the tranny had a lot to do with getting to 13.40s, if a completely stock 90 gt 5 spd. can go 13.90, then why cant a "slightly moddified" aod go 13.40s, a 5 spd car with almost identical mod (but he had a MAF) went 13.28. and the car does has good top end, i dont know why. the only thing i can figure is maybe the ads superchip helped the top end, but??? on a side note- my long block will be done (80% chance) next friday!! i'm hoping for a 11.70, but it is really hot here, we will see

------------------
My slo aod- 3.73s, pullies, flowmasters, h-pipe, bbk cold air, and 13.42 in the 1/4 @ 103 mph

LX XLR8R · 05-25-2001, 09:32 AM

hey the MPH does seem high but we all know there are 5.0 freaks out there..my buddy has a build AOD on a 89 hatch with just a elderbrock intake and gears/exhaust and it ran 13.7 on radials..and EVERYHINGis in that car..
and everyone called me a liar cuz my buddy ran a 10.2 with a 90 GT, stock bottom end with a b-cam, ported '69 351 heads, GT-40 intake and ubgraded b trim to 14# of boost

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch

Lizard King · 05-25-2001, 11:02 AM

This is out of my league. I don't know the 5.0 techology enough to gage the conversation. I congratulate you on your times SLOAOD.

The main reason I was skeptical about your times is because I had a friend that had a 5.0 Auto and Vert. He had some modifications like GT-40 intake... i forget the rest. Anyways he would always talk crap about breaking into the 13s... he shut is trap when we went to the track, cuz he couldn't break in the 15s.

Other experiences in town here have shown me that 5.0 even lightly modified are having problems breaking into the 13s. No one want's to race me anymore, execept my buddy with the Cobra.

When I look at the board here, it seems I may be completely wrong. We have bad drivers in the area, the cars might have been punished to much ... who knows.

Does your car run consistently that time? How are your 60ft?

------------------

13.66 @ 100.3MPH, Stock (except for K&N Filter)

• Quartermile run

Mercury · 05-25-2001, 11:20 AM

If your ever in North Carolina Lizard King, I'll race ya!

Rocket 99GT · 05-25-2001, 03:26 PM

"LIZARD KING" I am planning on going to Ottawa this summer, I will let you know so we can meet at the track.
I will bring some "lubrication" because I know you are going to hurt me.
.........................................

99GT…
rear sway bar (adjustable)
rear lower control arm
traction bars,
tokiko struts illumina 5 positions
tokiko shocks illumina 5 positions
caster camber plates
racing lower springs
3:73 gears
strut tower brace
underdrive pulleys
Michelin “pilot XGT-Z4 245X17.
No silencer
No spare tire

46stang · 05-26-2001, 04:28 PM

man sloaod you can drive my hats off to you

i raced a guy that had a 5.0 gt40 engine last night at the track.(iron gt40 heads,gt40intake and all the usual boltons+a 5 speed) his best time was a 14.3@95mph with a 2.20 60ft. i spanked him good

but it's all fun!

------------------
96 stang,ported 99 heads, 99 intake, 99 cams,Steeda power pullies,Kirban adj.reg.,Pro-m 87,24#inj.,70mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,iat mod, home depot ram air, k@n,373's,cobra brakes,fms spings, tri-ax shifter.
246 hp@5000
276 tq@4000

what_import · 05-30-2001, 05:25 PM

05-30-2001, 05:25 PM	#28
what_import Registered Member Join Date: May 2001 Location: Tampa,FL,USA Posts: 43	WOW!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which is your favorite general auto parts store?	Fox Body	Blue Oval Lounge	28	12-07-2017 11:18 AM
1996 Gt Auto To Auto Swap Now It Won't Run In Gear.	the69dr	Modular Madness	1	10-27-2003 08:54 AM
raced a Supra Twin Turbo	Stang35th	Stang Stories	63	08-23-2003 12:36 AM
Auto Meter Guage Install Question	jpumpkinn	Windsor Power	6	01-14-2002 02:27 AM
2000 v6 auto vs. 1987 5.0 auto	2000 silver auto v6	Stang Stories	56	03-23-2001 08:59 AM

05-25-2001, 01:08 AM	#21
90dpscoupe Registered Member Join Date: Jun 2000 Location: sanantonio, Tx, usa Posts: 1,407	sloaod, do you maybe have a manual rack steering? well anyway this car must pull pretty good topend, my car with stock exhaust and stock motor except coldair and fan, ran 13.91 @ 98 mph, 1/8 was 8.8 @80.? 2.0 60' on that run, so what is yout secret? i want 103 mph traps, that should put me around 13.4-5 thats cool though, those times will give some stocker ls1's a hard time, i know my 1.9 60 i cut left a 01 t/a chasing this ford, but he did catch me at the top it's cool, they are pretty shocked to see that my car has stock heads, cam, and internals. ------------------ 90 lx coupe: Mac cold air fenderwell, accel supercoil,ADS chip (not yet track tested),3-core radiatr, FMS alum D/S, Black magic fan, 3.27grs, 3chbr flows. Best time: 13.9116(on 225/60/15 firehawks) Best mph: 98.17 Best 60': 1.9607 next mods: subframes, mac h-pipe

05-25-2001, 08:16 AM	#22
TheSloAod Registered Member Join Date: Apr 2001 Location: baytown, tx usa Posts: 121	1-800-JENNY manual steering, lack of smog equipment, whats a front swaybar?, draglites, no heavy insulation covering the spare tire, but i have added subframes. the car has a stock shortblock, nothing has been cleaned up either. i think the tranny had a lot to do with getting to 13.40s, if a completely stock 90 gt 5 spd. can go 13.90, then why cant a "slightly moddified" aod go 13.40s, a 5 spd car with almost identical mod (but he had a MAF) went 13.28. and the car does has good top end, i dont know why. the only thing i can figure is maybe the ads superchip helped the top end, but??? on a side note- my long block will be done (80% chance) next friday!! i'm hoping for a 11.70, but it is really hot here, we will see ------------------ My slo aod- 3.73s, pullies, flowmasters, h-pipe, bbk cold air, and 13.42 in the 1/4 @ 103 mph

05-25-2001, 09:32 AM	#23
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	hey the MPH does seem high but we all know there are 5.0 freaks out there..my buddy has a build AOD on a 89 hatch with just a elderbrock intake and gears/exhaust and it ran 13.7 on radials..and EVERYHINGis in that car.. and everyone called me a liar cuz my buddy ran a 10.2 with a 90 GT, stock bottom end with a b-cam, ported '69 351 heads, GT-40 intake and ubgraded b trim to 14# of boost ------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. AIM=onesillynotch

05-25-2001, 11:02 AM	#24
Lizard King midnightruns.com Join Date: Dec 2000 Location: Ottawa, Ontario, Canada Posts: 584	This is out of my league. I don't know the 5.0 techology enough to gage the conversation. I congratulate you on your times SLOAOD. The main reason I was skeptical about your times is because I had a friend that had a 5.0 Auto and Vert. He had some modifications like GT-40 intake... i forget the rest. Anyways he would always talk crap about breaking into the 13s... he shut is trap when we went to the track, cuz he couldn't break in the 15s. Other experiences in town here have shown me that 5.0 even lightly modified are having problems breaking into the 13s. No one want's to race me anymore, execept my buddy with the Cobra. When I look at the board here, it seems I may be completely wrong. We have bad drivers in the area, the cars might have been punished to much ... who knows. Does your car run consistently that time? How are your 60ft? ------------------ 13.66 @ 100.3MPH, Stock (except for K&N Filter) • Quartermile run

05-25-2001, 11:20 AM	#25
Mercury The Redneck James Bond Join Date: Sep 2000 Location: Fayetteville NC Posts: 1,707	If your ever in North Carolina Lizard King, I'll race ya!

05-25-2001, 03:26 PM	#26
Rocket 99GT Registered Member Join Date: Jan 2001 Location: gaithersburg md, 20879 usa Posts: 120	"LIZARD KING" I am planning on going to Ottawa this summer, I will let you know so we can meet at the track. I will bring some "lubrication" because I know you are going to hurt me. ......................................... 99GT… rear sway bar (adjustable) rear lower control arm traction bars, tokiko struts illumina 5 positions tokiko shocks illumina 5 positions caster camber plates racing lower springs 3:73 gears strut tower brace underdrive pulleys Michelin “pilot XGT-Z4 245X17. No silencer No spare tire

05-26-2001, 04:28 PM	#27
46stang Registered Member Join Date: May 1999 Location: moorpark ca Posts: 340	man sloaod you can drive my hats off to you i raced a guy that had a 5.0 gt40 engine last night at the track.(iron gt40 heads,gt40intake and all the usual boltons+a 5 speed) his best time was a 14.3@95mph with a 2.20 60ft. i spanked him good but it's all fun! ------------------ 96 stang,ported 99 heads, 99 intake, 99 cams,Steeda power pullies,Kirban adj.reg.,Pro-m 87,24#inj.,70mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,iat mod, home depot ram air, k@n,373's,cobra brakes,fms spings, tri-ax shifter. 246 hp@5000 276 tq@4000