© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
06-18-2001, 07:31 PM | #1 |
It's never clean enough!
Join Date: Jan 1999
Location: Shaler, PA
Posts: 1,542
|
What do I need to beat a 97 SS
A friend of mine just got a 97 Camaro SS 6-speed. I'll eventually race him and I was just curious as to what I need to beat him in the 01 GT. The SS is stock for now and I still have to wait for my car to come in. Can I get low 13's with just bolt-ons and a pair of drag radials??
------------------ 91 GT AOD: 14.71@91.78mph SOLD!! 01 GT 5-speed on order: Ordered: 06/13/01 |
06-19-2001, 12:00 AM | #2 |
Registered Member
Join Date: Mar 2001
Location: Tulsa, OK
Posts: 9
|
You won't need to be low 13's to beat a stock LT-1 SS.
|
06-19-2001, 12:19 AM | #3 |
It's never clean enough!
Join Date: Jan 1999
Location: Shaler, PA
Posts: 1,542
|
but by the time we get around to racing, he won't be stock anymore. He said he was stopping when he reached low 13's or high 12's so I figure I would have to run somewhere close to that to hang with him or even beat him.
------------------ 91 GT AOD: 14.71@91.78mph SOLD!! 01 GT 5-speed on order: Ordered: 06/13/01 |
06-19-2001, 01:47 AM | #4 |
Registered Member
Join Date: Jun 2000
Location: Nor-Cal
Posts: 1,311
|
X-pipe, catback, cold air, 3.73's, pulleys, some DR's, you'll take him. Good luck!
------------------ Black 2000 GT Pulleys, mufflers, K&N Steeda springs, subs, strut tower, CC plates |
06-19-2001, 02:23 AM | #5 |
Registered Member
Join Date: Jun 2000
Location: sanantonio, Tx, usa
Posts: 1,407
|
4.10's and some stickier tires, should put you in high 13's, exhaust, pullies, to the mid's
|
06-19-2001, 10:30 AM | #6 |
RICE taste like Chicken
Join Date: Jun 2000
Location: Edmond, OK
Posts: 687
|
99GT's run high 13's stock. Lizard King runs 13.60's. Get gears, exhaust, and pullies you should hit 13.30's with a good driver....97SS's run 13.6-13.9's
------------------ Dustin Saleenized 89 GT,428 rwhp,TFS Street Heat Intake,TFS TW Heads,TFS #2 cam,BD-11A 9 psi,FRPP 1.6 rr's,BBK 70mm TB,Pro-M 75mm Bullet,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's 12.3@119 |
06-19-2001, 02:02 PM | #7 |
Registered Member
Join Date: Jun 2000
Location: sanantonio, Tx, usa
Posts: 1,407
|
Not to start a flame, but so what if lizard ran 13.60 once? i ran 13.9 one time in the cooler weater, that doesnt mean im gonna run that everytime i race, consistantly i run low 14's, i would bet lizard could run a consistent 13.9-14.0, but im not gonna speak for him, just saying, i would'nt be too dissapointed if a 00gt can't run 13.3 with grs, pullies, and exhaust, never know driver, altittude, but on a REAL good run, and weather, anything is possible.
|
06-19-2001, 03:14 PM | #8 |
Registered Member
Join Date: Aug 2000
Location: santa ana ca
Posts: 1,349
|
I agree, your average new GT runs mid-low 14's. Very few crack consistant 13's.
------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors |
06-19-2001, 03:23 PM | #9 |
Guest
Posts: n/a
|
Exhaust,gears,pulleys and 13.3's please.
|
06-19-2001, 05:02 PM | #10 |
RICE taste like Chicken
Join Date: Jun 2000
Location: Edmond, OK
Posts: 687
|
No flame started, I just have a strong opinion. Just from what I have seen...I have seen many many newer (99+) GT's run 13.80-13.90's at the track. Granted we are at 400 ft and it was in the cooler spring weather. I was just saying that a new GT with gears, exhaust and pullies should run way better than high 13's. Look at it this way. You have a stock 91 5.0 5 sp. You run a 15.0 completely stock. I have seen guys time and time again add gears, exhaust, and pullies that run low low low 14's and high 13's.
That is where my comments come from....hard evidence. **Keep in mind that I stated "with a good driver" ------------------ Dustin Saleenized 89 GT,428 rwhp,TFS Street Heat Intake,TFS TW Heads,TFS #2 cam,BD-11A 9 psi,FRPP 1.6 rr's,BBK 70mm TB,Pro-M 75mm Bullet,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's 12.3@119 |
06-19-2001, 05:09 PM | #11 |
It's never clean enough!
Join Date: Jan 1999
Location: Shaler, PA
Posts: 1,542
|
The exhaust will have to wait for now because I don't have the $. The Pulleys are being ordered from Steeda along with a tri-ax shifter and a timing adjuster. The only problem I am having is choosing what gears to go with. I was looking at either 4.10 or maybe 4.30. The car won't do any highway driving. It will maybe, maybe see 55mph during normal driving so the rpm shouldn't be as issue.
------------------ 91 GT AOD: 14.71@91.78mph SOLD!! 01 GT 5-speed on order: Ordered: 06/13/01 |
06-19-2001, 11:32 PM | #12 |
Tubbed and Juiced
Join Date: Mar 2001
Location: Tulsa, Oklahoma
Posts: 1,861
|
I HAVE YET TO SEE A NEW GT 99-01, HELL EVEN ANY NEWER GT BREAK INTO 13'S. But I guess everyone just sucks or something. =P Seriously I would love to see it, not doubtig it, just would love to see it.
|
06-20-2001, 12:21 PM | #13 |
The Redneck James Bond
Join Date: Sep 2000
Location: Fayetteville NC
Posts: 1,707
|
In the sweltering heat and humidity of North Carolina, my friends at the strip have seen a 99 Roush stage 2(stock no mods, I know all they are is decorated GT's) run consistant 13.9's.
|
06-20-2001, 01:50 PM | #14 |
Registered Member
Join Date: Mar 2001
Location: Tulsa, OK
Posts: 9
|
Hey Bad89, what's that guy in town with the yellow Vorteched Roush run? I've seen him around a few times, and since we're kinda on the subject, figured I'd ask. My friend says he hates imports, or at least VR-4's, so I didn't ask him myself.
|
06-20-2001, 04:35 PM | #15 |
Guest
Posts: n/a
|
Stang crazy, those gears are kind of steep......I hope you don't plan on adding a blower or n2o! If you're gonna go w/ a power adder in the future, I'd stick to 3.55's or 3.73's if I were you.
------------------ '90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; fiberglass turbo hood; A/C-less; rear seat-less; cat-less; 2 chamber Flos; Corbeau racing seats (fronts); 30# injectors; JMS Chip; 190 lb fp; TFS track heat Intake (12.299 @ 113) |
06-20-2001, 07:04 PM | #16 |
It's never clean enough!
Join Date: Jan 1999
Location: Shaler, PA
Posts: 1,542
|
I'd like to keep it n/a. With the gears, I was going to get a set of Nitto DR's so traction shouldn't be too much of a problem. And who knows...maybe down the line I'll add a supercharger but I can't see that happening anytime soon.
------------------ 91 GT AOD: 14.71@91.78mph SOLD!! 01 GT 5-speed on order: Ordered: 06/13/01 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ricer says he can beat me with 100 shot... | yelowjaket | Stang Stories | 33 | 11-17-2002 11:22 PM |
Beat a viper, kinda long... | jerryIII | Stang Stories | 16 | 08-03-2002 02:52 PM |
97GT Has to Beat LT1 !! | Skyman | Modular Madness | 17 | 05-08-2001 11:34 PM |
Tired of getting beat...what should I do next? | LOCASH | Windsor Power | 4 | 03-01-2001 05:34 AM |