![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
![]() We finally got some cold weather last night. It was in the high 40's.
I couldn't believe what a difference it made in my cars power. It felt like a different car! On a 90degree day with the 80shot of N20 it feels just about the same as all motor on a high 40's night. I wish I could get to the track in some weather like that! Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor 332RWHP, 350rwtq |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
|
![]() Just move over here In MI it have been it the 40's at night for about 3 weeks
![]() LOL ------------------ 14.28@103.0 on a G-Tech Engine: Steal Mounts, Under drive pulleys, K&N, Home ported Lower Intake, No power steering, No A/C Drive Train: 3.55, T-5z, Real power STUFF I Have and will put some time: Mac cold intake, 70MM TB, Valve covers (COOL ONES)255 Fuel pump NOS Dry 75HP, AFR 165 58cc, GT-40 Intake. Next to get: Rocker Arms,Cam,Injectors 24, What might I need???See It at www.computerconquest.com |
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]() Mid-high 30's last night here. I went for a spin last night when it was about 42-45 and it WAS awesome throttle stomping weather.
------------------ '90 LX 5.0;12K original miles;FMS 3.55 gears; March pulleys;Edelbrock Performer Heads;BBK 1 5/8" equal length shorties;MSD 6AL ignition w/ blaster 2 coil;FMS E303 cam;Pro-M 75mm MAF;BBK 70mm TB; Eibach drag-launch spring kit;Southside weld-on subs;9" K&N cone filter charger;Hurst shifter;Cervini 3" turbo hood;A/C delete;gutted cats;2 chamber Flomasters;Corbeau racing seats;FMS 30# injectors;JMS custom chip;Holley 190lb fp;TFS track heat intake (12.299 @ 113mph w/ a 1.78 60') ....soon to be b |
![]() |
![]() |
#4 |
street racing junkie
Join Date: Sep 2001
Posts: 231
|
![]() Hey Skyler, Do you have any stalling problems with your e303 cam? My 2040 is the same and it stalls at lights once in a while. I also think I have a vacum leak on the side of my TB. At least I think it is coming from there. Do you ever hear a hissing noise from that area? If so can You help? Buy the way, a zo6 with a 150 shot smoked me today bad....Of course I had my street tires on and spun the whole time. See Ya thanks
------------------ 95 gt:347 stroker balanced,edelbrock 150 shot, edelbrock intake and heads ported and matched, 70mm throttle body, 75mm mass air meter, 2040 cam, 1.7 cobra rockers,cold air induction, bbk equal lengths,high flow h-pipe, super chip, 24lb injectors,190lph fuel pump(bbk), under drive pulleys, 4;30 gears,Hurst shifter Has other mods but not too sure what my mechanic did. To see all mods look at my spec page. R/T .641 60FT 1.57 1/8 6.98 1/4 10.81 @ 127MPH |
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Feb 1999
Location: Indianapolis, IN
Posts: 963
|
![]() bri32Z, I have a couple of questions, first where did you get the Edelbock 150 shot kit at, I keep getting told that it is not available yet
![]() ------------------ 1991 Lx sedan 5.0, 5spd, TFS Heads, Cobra intake, TF Stage 1 cam, 1.6 rr's,73MM mass air, 65mm TB, FPR, 24lb injectors, , BBK Equal length headers,off road H-pipe, Flows, K&n , hurst, 3:55's, pullies,electric fan, mac upper and lower control arms, HD trac-loc, lakewood 50/50's on back, shift light, centerforce dual friction, and rebuilt heavy duty T5, A/C SP delete 255/50/16 BFG DR AL D/S Old combo 13.2@105.5 (Gt40 heads, 156k miles, Ecam, stock rocker arms, Shorty headers) New Combo ( |
![]() |
![]() |
![]() |
#6 |
street racing junkie
Join Date: Sep 2001
Posts: 231
|
![]() My n2o is an edelbrock bottle and lines. The rest is from a friend that had a 150 shot so the rest I think is NOS brand---not too sure, I have no mechanical skills what so ever. My block is far from stock.. Read my mod page. No I do not think my mechanic put on another fuel pump. I could be wrong though. Edelbrock does offer the efi kit now. An 80 shot is around 500 dollars or so. The 150 is a lot higher around 800. Sorry for sounding dumb but I am slowly learning about engines. I pay top dollar for all my stuff and mechanics...wish I knew how to install this stuff myself. Would of saved my around 4 grand. Brothers performance sells the kit.
------------------ 95 gt:347 stroker balanced,edelbrock 150 shot, edelbrock intake and heads ported and matched, 70mm throttle body, 75mm mass air meter, 2040 cam, 1.7 cobra rockers,cold air induction, bbk equal lengths,high flow h-pipe, super chip, 24lb injectors,190lph fuel pump(bbk), under drive pulleys, 4;30 gears,Hurst shifter Has other mods but not too sure what my mechanic did. To see all mods look at my spec page. R/T .641 60FT 1.57 1/8 6.98 1/4 10.81 @ 127MPH [This message has been edited by bri32z (edited 10-08-2001).] |
![]() |
![]() |
![]() |
#7 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
![]() Bri- Yes I definatly had lots of problems with this when I first got my motor together. I took it to several mechanics that couldnt figure it out, so I just went about it myself. Over time I finally got it to run pretty damn good.
Here was what I did. First, bump your fuel pressure about 5-8psi, and I set my timing at 18. These helped. Then set your Idle to about 1100rpm. This isn't bad at all, and much better than stalling. After youve set the idle, get your TPS voltage set. If you dont know how, just ask on here, its not too hard. Make sure its set at .98V. Remember setting your idle will change your TPS voltage, so always do these together. Once you've got all that setup and its idling decently. Disconnect the computer for 30min so you can reset the computer. Hook it up and let it idle for 5 min with no accessories on. After that take it out for a drive, and drive normal, then get on it some. over a day or two it should run pretty good. If not, you may need a custom chip burned. But I got a JMS chip and it didnt so **** for me. Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor 332RWHP, 350rwtq |
![]() |
![]() |
![]() |
#8 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
![]() I Just noticed you have a superchip also. Is that a stock out of the box chip? If so, its hardly tuned for the 347 setup you have. You may benefit greatly from a custom chip, and you may even gain just pulling that crappy superchip out.
Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor 332RWHP, 350rwtq |
![]() |
![]() |
![]() |
#9 |
Registered Member
Join Date: Aug 2000
Location: santa ana ca
Posts: 1,349
|
![]() You NEED a custom burnt chip. My car hardly ran at all untill I got mine. You have to find a good tuner though.
------------------ 95GT, TFS T.W. heads, Holley Intake, B303 cam, FRPP 30lb injectors, Scorpion 1.6 rollers, 65mm TB, 73mm MAF, BBK Longtubes, Flowmaster cat back, March Pulleys, MSD coil, 9mm wires, Tremec 3550 trans, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors. 190lph pump, BBK adj FPR. |
![]() |
![]() |
![]() |
#10 |
street racing junkie
Join Date: Sep 2001
Posts: 231
|
![]() Thanks for all of the advise Skyler. Will get to work on it this weekend or if I have time after work. I do think the chip has a lot to do with it. I sat outside for 2 hrs trying to find the vacumn leak with no answer. A custom chip will probally be the next step---all this money and idle problems---SUCKS.....Well once again thanks, I am so new to this mechanic stuff it blows my mind.
|
![]() |
![]() |
![]() |
#11 |
All show, some go 4 now!
Join Date: Jun 2001
Location: Franklin, NH
Posts: 175
|
![]() 28° the other morning. After I scrapped the windows she ran like a rapped ape! And you California guys think you have it good all the time!
------------------ '95 Chrome Yellow GT ragtop, KN filter charger, Dynomax cat back, Accel plugs and wires, Chromed '95 Cobra R's (bought for $19.95, now 2 are warped!). http://www.mustangworks.com/cgi-bin/moi-display.cgi?1883 |
![]() |
![]() |
![]() |
#12 |
Registered Member
Join Date: Mar 2000
Location: Springfield, Ma, usa
Posts: 706
|
![]() yeah it was d@mn cold the past 2 mornings. what a blast to drive the car, i wish it had that much pull all the time!
------------------ 89 GT AOD w/ shift kit, B&M rachet shifter, Trickflow intake, Crane (E-type) cam, 70Tb, 75MAF, 1.6 Rockers, Pulleys, MAC headers and H-pipe, Dynomax mufflers, K&N, 3 core radiator, white face gauges, custom interior, cobra R rims. 14.9 at 95.07mph with stock 2.73's. 89LX 2.3 Notch, daily beater! MY89GT |
![]() |
![]() |
![]() |
#13 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
![]() Bri32z- Try what I said, or suggest it to your mechanic. At the time I did my motor I had plenty of money, but it didnt matter. The people working on it still didnt know what they were doing. Now I'm broke and Ive had to do it myself.
SKyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor 332RWHP, 350rwtq |
![]() |
![]() |
![]() |
#14 |
Registered Member
Join Date: Oct 1998
Location: Rogers, MN
Posts: 2,089
|
![]() Move to Minnesota and see what it drives like at 30 below.
![]() ------------------ 351W 89 Mustang GT Convertible |
![]() |
![]() |
![]() |
#15 |
Registered Member
Join Date: Jun 2000
Location: sanantonio, Tx, usa
Posts: 1,407
|
![]() Did you spray on that z06 bri? you'll get him next time
![]() |
![]() |
![]() |
![]() |
#16 |
street racing junkie
Join Date: Sep 2001
Posts: 231
|
![]() I sprayed and with my street tires just spun so I gave up. Rode in his car before and it is real fast. It would be a close one on slicks. I never forget there is always someone out there faster. Take care.
------------------ 95 gt:347 stroker balanced,edelbrock 150 shot, edelbrock intake and heads ported and matched, 70mm throttle body, 75mm mass air meter, 2040 cam, 1.7 cobra rockers,cold air induction, bbk equal lengths,high flow h-pipe, super chip, 24lb injectors,190lph fuel pump(bbk), under drive pulleys, 4;30 gears,Hurst shifter Has other mods but not too sure what my mechanic did. To see all mods look at my spec page. R/T .641 60FT 1.57 1/8 6.98 1/4 10.81 @ 127MPH |
![]() |
![]() |
![]() |
#17 |
Registered Member
Join Date: Aug 2001
Location: Albuquerque, New Mexico, USA
Posts: 6
|
![]() The night I blew my motor, it was 37 degrees out. The car was running perfect! I went home and put my bottle in a tub of hot water this always makes it better. The bottle warmer kept it nice and hot, and with the cold the car ran, and pulled harder then it ever had. It was such a blast, at least I got to enjoy one night before the motor went.
(200 shot) ------------------ |
![]() |
![]() |
![]() |
#18 | |
Registered Member
Join Date: May 1999
Posts: 5,246
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#19 | |
All show, some go 4 now!
Join Date: Jun 2001
Location: Franklin, NH
Posts: 175
|
![]() Quote:
![]() ------------------ '95 Chrome Yellow GT ragtop, KN filter charger, Dynomax cat back, Accel plugs and wires, Chromed '95 Cobra R's (bought for $19.95, now 2 are warped!). http://www.mustangworks.com/cgi-bin/...splay.cgi?1883 [This message has been edited by topless tire fryer (edited 10-19-2001).] [This message has been edited by topless tire fryer (edited 10-19-2001).] |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cold Weather Detonation | SleeperGT | Power Adders | 10 | 12-17-2003 07:38 PM |
Check Coolant light on when cold | Tecknowolf | Windsor Power | 2 | 09-14-2003 06:35 PM |
cold air intake | TRipSOber | Modular Madness | 13 | 05-01-2003 03:49 PM |
Not very many kills being posted ....Is it the cold winter weather or what? | Dark_5.0 | Stang Stories | 8 | 01-21-2002 06:37 PM |
Tranny shifts funny in cold weather??? | HiFlow5 0 | Windsor Power | 8 | 11-03-2001 07:48 AM |