![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Feb 2001
Location: Berkshire County - Massachusetts
Posts: 735
|
![]() I took her to the strip last weekend and was surprised by a new best ET. I guess a good alignment is good for .3 after all. Also, I got to beat a brand new Vette (Wooo!) and he wasn't too happy that his 50K Bowtie couldn't chase me down. It looks like I'm having some trouble finding the finish line cause my MPH is way down which means either a) I'm backing off the throttle before the finish line or b) I'm down on HP. Either way I'm happy because my engine builder came with me and he said I got the front end off the ground a little. I still haven't hooked uo the t-brake yet but that's next on my list od things to do. Plus, I'm going to drop the psi in the BFG drag radials down to 15 lbs and see what happens. Hopefully, I can get over there one more time before winter. Is is getting cold round here. I'm jealous of all you Cali and Texas guys.
__________________
Red 1993 GT Street Machine Best E.T. - 12.41/Best MPH = 108 Engine is a 1969 351 block w/393 stroker kit. Dynamic Roller Myte C4, 8 pt cage. Edlebrock Performer heads and Victor Jr. EFI, FRPP 30lb injectors & Cartech fuel system. MSD ignition. Sothside Machine bars & Sub-frames, adj. upper's, 3.73's, Koni rear shocks, much more |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Oct 2002
Location: Carthage, MO
Posts: 59
|
![]() Sweet..........................gotta love those holeshot wins
![]() |
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Aug 2001
Location: Huntington NY
Posts: 573
|
![]() Did you go this past Friday? My local speedshop rented it out, were you there?
__________________
-1993 Mustang, 900rwhp 03-04 cobra based 4v swap, full Griggs setup, project underway -1994 Ranger w/ 427cid windsor (daily beater) check it out! |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Jun 2002
Location: manassas, va
Posts: 186
|
![]() congrates, but i think someone must of ribbed you about that reaction time, i assume it was on a .500 tree. but aslong as you got the win light. and how do you liike that dynamic c-4, i am interested in one of those, just wondering what you thought.
__________________
1983 mustang, 393 cubic inch stroker small block, victor jr heads and intake, gold race 1.6 roller rockers. comp cam 304, 244@ .050. .576" hydralic retro roller cam,lunati rods. block was o-ringed,10:1 forged pistons, speed pro fit fit rings, clevite bearings,msd distributor and igniton,be cool huge radiator, black lite electric fan, march underdrive pulleys, mildon deep sump oil pan, mac 1 3.4" long tube headers, 3" dr gas x-pipe and mac exhaust,ARP bolts. car weighs 2900 lbs w/out driver, sub frames, weld wheels, mickey thompson sportsman pro 26 x 10.5 x 15's,#8 fuel line steel braided |
![]() |
![]() |
![]() |
#5 |
Dirk Diggler
Join Date: Feb 1999
Location: SLOATSBURG, NY
Posts: 1,931
|
![]() congrats on the time but it sounds like you have ALOT of tuning to do..you think about geatting new heads,tb,intake...that 393 is alot of air to be sucking threw that stuff
that et matcehs the mph..its not like its THAT low..you do have an encreadble amount of tourque..im trying to think of some of my old runs and i have gone 13.0@101 on street tires with 1.7goft BTW is not lebanon upstate ny??i never been up there..how is it..you ever come downwards of closer to NJ? keep up the good work..im doing a 408 as we speak..should be done in spring
__________________
95 undecided cubes, AFR 185s,undecided cam, undecided intake, and a 150 hit 89 "turbonotch" 2.3T You might want to hold on..i saw this on a cartoon once |
![]() |
![]() |
![]() |
#6 |
Registered Member
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
|
![]() Man I wish I can get a 1.7XX!!!!!!! I just got my best time as well at the track. last night. 12.7
__________________
Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe Drive Train: 3.55, T-5 with a Pro 5.0 shifter 12.656@107.71MPH See It at www.T-racing.com/mustang.htm |
![]() |
![]() |
![]() |
#7 |
Registered Member
Join Date: Mar 1999
Location: va
Posts: 35
|
![]() I can't believe that 60ft time. Nice going. I could never get better that 1.9 with BFG Drag Radials. What pressure were you running and what width wheel?
|
![]() |
![]() |
![]() |
#8 |
Registered Member
Join Date: Sep 2002
Posts: 70
|
![]() room for improvement on that r/t as well.
good job! i'll be in the 12's club next spring. |
![]() |
![]() |
![]() |
#9 |
Registered Member
Join Date: Oct 2002
Location: Poughkeepsie, NY
Posts: 41
|
![]() Stang_ROTY - HEY MAN! its the kid with the 93 calipso green notch from NY. we talked about a month or 2 ago up there at the valley. whats up? GREAT times man. i wish i could cut ur 60fts. next year maybe when my 373s are in there with a pair of MT streets. i just put a tremec in my car too 3550. i need a new crossmember and clutch cable though, they're shot. crossmembers rotted out. if my friend scott lets me borrow his shifter, i might go up one last time to see what my car can do. im going to hit the track a lil differently though next time, deff bringin some ice too. i just wanna crack into the 12s with my 308s.
![]() Vinny
__________________
1993 5.0 mustang coupe cobra upper and lower intake, TFS TW Alum. heads, TF 1.6 Roller rockers, TF stage one cam, mac 70 mm T/B, 76 C&L Air meter, FMS 24lb in. steeda pullies, Tremec 3550, FMS 373 gears, FPR, white face gauges, pro 5.0 shifter, 3 chamber flowmasters, Offroad h-pipe, Mac headers, Centerfource cluch, steeda clutch quadrant and cable, saleen wing, walbro 155 fuel pump, Eibach lowering springs 1 7/8", M.U. Sub-frames. Track Times: Lebonon Valley: before heads/cam 13.76 @ 101.74 60ft - 2.24 after but before gears - 13.26 @106.66 with 2.166 60' EnglishTown before gears - 2.34 60ft - 13.35 @108.12 Etown after - 12.851 @108.19 2.000 60ft |
![]() |
![]() |
![]() |
#10 |
Dirk Diggler
Join Date: Feb 1999
Location: SLOATSBURG, NY
Posts: 1,931
|
![]() naw it was a sticky day at the track and we went from 1.9 to 1.8 then hit a 1.7!!..track was so sticky that you couldnt do a burnout in 2nd gear..the clutch slipped!!
tires in question are dunlop8000sp mounted on ponies aired down to 24#'s on drivers side and like 1-2#'s less on passenger..o yea and bone stock suspension with no front sway..this was done at Island dragway i belive..could of been ATco
__________________
95 undecided cubes, AFR 185s,undecided cam, undecided intake, and a 150 hit 89 "turbonotch" 2.3T You might want to hold on..i saw this on a cartoon once |
![]() |
![]() |
![]() |
#11 |
GOT TORQUE ????
Join Date: Aug 1999
Location: New Hudson, Michigan, USA
Posts: 689
|
![]() Nice time, and as a bonus you got to piss off a Vette owner.
![]()
__________________
1991 GT, AOD, Moroso Cold Air, 3.73s, Pulleys, H-pipe, MAC Pro-Dumps, FMS c-springs, and KYBs, A/c delete, 190 LPH fuel pump, 3-row radiator, Maximum Motorsports full length subframes 2002 Oldsmobile Bravada(wife's car) 2005 Ford Taurus SEL (company ride) GOD BLESS OUR TROOPS !!!! |
![]() |
![]() |
![]() |
#12 |
Registered Member
Join Date: Feb 2001
Location: Berkshire County - Massachusetts
Posts: 735
|
![]() Thanks for the comments guys. I'll try to take the questions one at a time.
RPM427- No I didn't go this past Friday. When's the next time you guys are renting it out?? tarmon8r-Yeah, I got ribbed about the RT quite a bit. I'm really not concentrating on cutting a good light yet...still trying to get the routine down. I'll get better. I like the Dynamic tranny a lot on the strip. But on the street it's no fun. It's a beast though on the strip. The one I got was built for a Pro 5.0 car. Yeah, it's too much but it's the last thing I want to worry about so I had them beef it up quite a bit and over the summer while the engine was out we took it down for a refresh and check up. You wouldn't believe what they put them through on their Dyno before they sell em. Really tough tranny's LX XLR8R-You're right about the tuning. I'm using no chip right now and some Victor heads would be real nice. Lebanon's right outside of Albany. Pretty decent track but nothing the pro's will come to. No Top Fuel either. There talking about maing everything muffled next year too :-( I've only been to NJ for Englishtown for NHRA. What are doing to the 408?? EFI or carb?? Good luck with it! Stang Runner-Congrats to you too. muskrat-I ran them at 18 lbs. Might try 15 next time. Bluefox91LX-Thanks. I'll get better on the R/T. That was only my 3rd run ever. Green93notch-Vinny! Wuz up man?? Nice to hear from ya. Let me know if you're going again and I'll make the time to get there. Those 60's are pretty good. I hope I can keep them up there when I use the t-brake. Was thinking about going again tomorrow if the weather holds up. The track closes in 3 weeks. It sucks now though b/c to run on a Sat costs $30.00. We'll stay in touch. PM me with your email and we can chat over the winter. It's supposed to be a long one. MTU 50- Thanks man. I've only ran three times and I've beat a 3rd gen Camaro, a newer 98-up Camaro, and the Vette. Have I ever told you that I HATE CHEVY's ;-)
__________________
Red 1993 GT Street Machine Best E.T. - 12.41/Best MPH = 108 Engine is a 1969 351 block w/393 stroker kit. Dynamic Roller Myte C4, 8 pt cage. Edlebrock Performer heads and Victor Jr. EFI, FRPP 30lb injectors & Cartech fuel system. MSD ignition. Sothside Machine bars & Sub-frames, adj. upper's, 3.73's, Koni rear shocks, much more |
![]() |
![]() |
![]() |
#13 | |
GOT TORQUE ????
Join Date: Aug 1999
Location: New Hudson, Michigan, USA
Posts: 689
|
![]() Quote:
![]()
__________________
1991 GT, AOD, Moroso Cold Air, 3.73s, Pulleys, H-pipe, MAC Pro-Dumps, FMS c-springs, and KYBs, A/c delete, 190 LPH fuel pump, 3-row radiator, Maximum Motorsports full length subframes 2002 Oldsmobile Bravada(wife's car) 2005 Ford Taurus SEL (company ride) GOD BLESS OUR TROOPS !!!! |
|
![]() |
![]() |
![]() |
#14 |
Dirk Diggler
Join Date: Feb 1999
Location: SLOATSBURG, NY
Posts: 1,931
|
![]() DFI
![]()
__________________
95 undecided cubes, AFR 185s,undecided cam, undecided intake, and a 150 hit 89 "turbonotch" 2.3T You might want to hold on..i saw this on a cartoon once |
![]() |
![]() |
![]() |
#15 |
Rat Killer
Join Date: Aug 2002
Location: Cold ass Ohio
Posts: 1,143
|
![]() I gotta throw in a snide comment about the reaction time, it's compulsory ya know!
I'm happy for ya, doesn't it feel good to have a great running pony, that you KNOW is gonna do better? Last thing, according to BFG, you're not supposed to go below 16 PSI on those drag radials, so if you drop 'em to 15, be careful! Congrats again! |
![]() |
![]() |
![]() |
#16 |
Dirk Diggler
Join Date: Feb 1999
Location: SLOATSBURG, NY
Posts: 1,931
|
![]() big daddy runs his @9psi on shotty tracks and 13 on good ones
__________________
95 undecided cubes, AFR 185s,undecided cam, undecided intake, and a 150 hit 89 "turbonotch" 2.3T You might want to hold on..i saw this on a cartoon once |
![]() |
![]() |
![]() |
#17 |
Registered Member
Join Date: Aug 2001
Location: Huntington NY
Posts: 573
|
![]() Driving image is renting it out in the spring again. It is limited to 150 cars. Bill, the owner, picks who goes. It is for his customers.
__________________
-1993 Mustang, 900rwhp 03-04 cobra based 4v swap, full Griggs setup, project underway -1994 Ranger w/ 427cid windsor (daily beater) check it out! |
![]() |
![]() |
![]() |
#18 | |
Registered Member
Join Date: Feb 2001
Location: Berkshire County - Massachusetts
Posts: 735
|
![]() Damn,
My reason for running the 18 lbs is cause I have the issue of MM&FF where they track tested the tires. But then my engine builder came to me last week and said he read in the new Car Craft that they dropped them to 15 and were getting good results. Thanks Jester. I know they get a little sloppy on the top end right now, 15 might be pushing it. Quote:
__________________
Red 1993 GT Street Machine Best E.T. - 12.41/Best MPH = 108 Engine is a 1969 351 block w/393 stroker kit. Dynamic Roller Myte C4, 8 pt cage. Edlebrock Performer heads and Victor Jr. EFI, FRPP 30lb injectors & Cartech fuel system. MSD ignition. Sothside Machine bars & Sub-frames, adj. upper's, 3.73's, Koni rear shocks, much more |
|
![]() |
![]() |
![]() |
#19 |
Registered Member
Join Date: Oct 2002
Location: Carthage, MO
Posts: 59
|
![]() CHEVY=Car Hardly Ever Vacates Yard
![]() |
![]() |
![]() |
![]() |
#20 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
![]() How much compression do you have?
I dont mean to be rude, Im glad you having fun with the car. But 105mph out of a 393 isnt so good. Go back to your engine builder now, check your compression. Your car isnt running right unless its grossly out of tune. You should be going 113-116mph atleast. Skyler
__________________
2001 BMW M3 6spd 12.79@108 RIP ---- 1993 Notch w/ 98 4V 4.6 Fasttt... -1989 Saleen Mustang #406- 12.32@109 -1999 Black Cobra Coupe- JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others. |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
tranny slip | 66StangGuy | Classic Mustangs | 5 | 11-03-2002 08:11 AM |
Traction lock v. Limited Slip? | The Deuce | Modular Madness | 10 | 09-05-2002 12:38 PM |
Tranny slip yoke? | Fostang | Classic Mustangs | 0 | 02-11-2002 07:59 PM |
difference in limited slip?? | acidangel316 | Windsor Power | 1 | 07-26-2001 02:00 AM |
Lockers or Limited Slip? | 84stangLX | Windsor Power | 3 | 03-22-2001 12:41 AM |