MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Website Community > Stang Stories
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 09-15-2003, 06:57 PM   #1
jonnyk
Being stroked is great
 
jonnyk's Avatar
 
Join Date: Oct 1998
Location: Alberta, Canada
Posts: 772
Default 331 vs. new GT 5 speed

Well I admit I've been lazy at posting, I don't think I've posted any of my races yet this year (I'm about 50/50 now, most of my losses are stoplight races that I burn the tires for the first 60 mph and run out of room to run them down).

Anyways, I was out on Saturday night cruising down a local strip, and pulled up to a light against a nice new yellow GT. Looked over to the side, nodded, and knew it was on. The opposite light turns yellow and I get ready to give buddy a blast of tire smoke and hopefully hang with him for a ways. The green light drops and I roll into the throttle and SIDEWAYS just about instantly. I hit 2nd, ease off, and then roll back into it, and go sideways again banging the 6000 limiter on the Crane ignition, and the Magnaflows are ROARING! At this point there are parked cars on the right ahead and I'm hanging halfway into that lane so I decided to shut down. GT 1, LX 0 He had me by about 3 cars because I really couldn't get moving. Time for some new tires, my bald 245's and road race caliber suspension don't make for good 60' times, especially on cold asphalt.

Anyways, we continue along and pull up to another light and chat...blah blah, what's a 5.4? Stuff like that. (I have 5.4 badges on the side of my car to let the losers know what lurks beneath). Light turns green again and I'm not willing to suffer defeat so I ease away, and the other guy wasn't racing either. We cruise for another couple blocks and the road widens out and speed limit increase, he drops a gear beside me and gets a 2-3 car length jump (I knew he needed it so no panic). I downshift to 2nd in the meat of the powerband around 40 mph and drill it. Top of 2nd gear I'm right beside him, and I powershift 3rd and spin a bit, giving him a nice shot of exhaust. Wind out 3rd gear and hit 4th and he's already 3-4 car lengths back, and I wind out 4th until around 110 and I can barely see his headlights anymore The motor sure pulls nice in 40 degree weather!
Revenge was very sweet.

My car went 13.4 on the bald tires before I did my Magnaflows, in the heart of July's heat, humidity, and we're at about 2400' altitude here too. For reference, most LS1 Camaros/Firebirds go 13.8-14.0 at around 100 mph here, and a headers/CAI/drag radial auto C5 Vette went 13.2 @ 106. Same night also a ZO6 went 13.2 @ 107, although I admit the guy probably wasn't the greatest driver. I suspect I'll be close to the 12's with the new exhaust now, it makes a lot more torque and pulls a lot harder in the 5300+ rev range. I have one more track day on the 5th of October to find out (with a lot COOLER air)!

Jonathan
__________________
Novi 2000 now spinning off the snout of the 331...

Mods Pics

Last edited by jonnyk; 09-15-2003 at 07:37 PM..
jonnyk is offline   Reply With Quote
Old 09-15-2003, 11:17 PM   #2
Fox Body
Mustang Maniac
 
Fox Body's Avatar
 
Join Date: Sep 2000
Location: GA, U.S.A
Posts: 2,266
Thumbs up

Nice races. Yes, revenge is sweet. Now PLEASE, go get some drag radials, learn how to ease that baby out of the hole, and quit embarassing us here! j/k
__________________
351W-powered 1979 Ford Mustang Ghia notchback
'79 Video @ Idle
Stock 5.8L under 4" cowl 'glass hood, C4 w/ Transgo shift kit, Holley 750 cfm, Edelbrock Performer RPM intake; Fluidyne Al radiator, Flexalite 175 electric fan, 1 5/8" MAC shorty headers, FRPP Al driveshaft; S&W 6-point cage; 2.5" Off road H-pipe, 2-chamber Flowmasters, 8.8" Rear w/ 3.55s; Weld wheels (15x6;15x8), Front: 225/60/15, Rear: 275/50/15 Nitto NT 555R Drag Radials;
14 x 4” K&N X-stream air filter.


'92 GT (5-speed)
Small In Car Video
Stock 5.0L, 2-chamber Flowmasters, MAC CAI, Tri-Ax, Al pedals...

"Red, thou art my companion. Hasten now your quickened metamorphosis to Green that I may conquer all who dare abide there beside me. May they be left thither behind burnt black." ---Fox Body
Fox Body is offline   Reply With Quote
Old 09-16-2003, 12:48 PM   #3
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default

Traction is your friend.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 09-20-2003, 06:36 PM   #4
RoadWarrior
Registered Member
 
RoadWarrior's Avatar
 
Join Date: Apr 2000
Location: Edmonton,Alberta,Canada
Posts: 317
Default

Ya the cars doing good. Now i have to hear it with the new exhaust. Maybe ill line up beside you sometimes. I just need to get some gears to keep up to all you guys. My little 3.08s are starting to fall behind.
__________________
Fast Company
RoadWarrior is offline   Reply With Quote
Old 09-21-2003, 03:21 AM   #5
red82gt
Sober voice of Reason
 
red82gt's Avatar
 
Join Date: Nov 1998
Location: Kelowna, B.C., Canada
Posts: 1,514
Default

My 373's aren't cutting it, I couldn't imagine 308's. My car's power peak is at 6100 rpms so I'm practically crossing the line in 3rd (Actually did cross in 3rd a couple of times this weekend).
Roadwarrior, don't fear the gear, if you want to get the most out of your car, get 4.10s. If I were to do it over again, I'd go with 4.30's. I'm probably just going to bottle my car which will make the 373's useful again.
__________________
393W: AFR 205's, hydraulic roller, TKO600.
red82gt is offline   Reply With Quote
Old 09-21-2003, 04:31 PM   #6
RoadWarrior
Registered Member
 
RoadWarrior's Avatar
 
Join Date: Apr 2000
Location: Edmonton,Alberta,Canada
Posts: 317
Default

Actually right now i dont mind the gears that i have. Even with the 3.08's i managed a 13.9 @ 101.8mph. And thats at the same track as jonny. But i think that changing the gears and getting some beefy tires should cut a good chunk off my timeslips.
__________________
Fast Company
RoadWarrior is offline   Reply With Quote
Old 09-23-2003, 10:29 PM   #7
sedanman
Registered Member
 
Join Date: Feb 1999
Location: Indianapolis, IN
Posts: 963
Default

Traction can make or break a street race, if you drive it mostly on the street I would reccommend some Nitto Dr's.
__________________
04 Screamin Yellow Cobra
KB 2.4 (585/556 pump 626/666 race)
00R brakes, DFX clutch, Level 5's, return fuel system, Lts with 3" exhuast, FR500 wheels and all the other fun stuff.

GONE 1991 Lx sedan 5.0, 5spd (Liberty proshifted TKO) S-trim, Ported TF heads everything parted out.
sedanman is offline   Reply With Quote
Old 09-25-2003, 08:16 AM   #8
USMC302
Registered Member
 
USMC302's Avatar
 
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
Default

Quote:
Traction can make or break a street race
Damn straight, I went out in drag radials and the other stang was on slicks (go figure) after we finally hooked, he did NOT pull away anymore, we were about 1 car length apart the entire race, it was all out of the hole that mattered. Funny how no one remembers the part about him on slicks and me on drag radials, just that I got my *** handed to me by the 93 cobra. Oh well, I'll see him again.....
__________________
USMC302 is offline   Reply With Quote
Old 09-25-2003, 05:39 PM   #9
jonnyk
Being stroked is great
 
jonnyk's Avatar
 
Join Date: Oct 1998
Location: Alberta, Canada
Posts: 772
Default

I will only be addressing traction to a limited amount on the street because I do put on a lot of miles despite it being a weekend warrior. I think I can work on the front suspension a fair bit with coilovers so I can soften it up, and I am also adding wider tires in the rear and thinking about ballast also. It sounds extreme now but I'm sure once I supercharge it I will be thanking myself
__________________
Novi 2000 now spinning off the snout of the 331...

Mods Pics
jonnyk is offline   Reply With Quote
Old 09-26-2003, 09:22 PM   #10
Coupe50h
Registered Member
 
Coupe50h's Avatar
 
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
Default

Quote:
Originally posted by red82gt
My 373's aren't cutting it, I couldn't imagine 308's. My car's power peak is at 6100 rpms so I'm practically crossing the line in 3rd (Actually did cross in 3rd a couple of times this weekend).
Roadwarrior, don't fear the gear, if you want to get the most out of your car, get 4.10s. If I were to do it over again, I'd go with 4.30's. I'm probably just going to bottle my car which will make the 373's useful again.
Naw man, look what im getting out of 3.27's, and slicks!!

with that cam of yours 4.10's would be great though.
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's.
race weight 3,160

12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear

13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear
Coupe50h is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Are all 8.8 rears the same? 82 GT Windsor Power 29 08-23-2004 01:06 PM
Tips on buying an 87 GT(is it really a GT?) LincoConti87 Windsor Power 9 07-23-2004 08:08 PM
'02 GT Drop top Vs. '94 Cobra EZRIDN Stang Stories 3 03-26-2004 04:23 PM
GT and LS-1 get into Tangle. GT WINS!! Mercury Stang Stories 8 06-26-2001 12:49 PM
3 speed Manual to a 3 speed Auto in a 66 T-N-T Classic Mustangs 0 08-04-1999 08:45 AM


All times are GMT -5. The time now is 06:26 AM.


SEARCH