© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
01-14-2002, 12:16 PM | #1 |
Registered Member
Join Date: Jan 2002
Location: carlisle,Ohio
Posts: 5
|
What you think?
I was wondering about my 87 mustang.....Im gonna put underdrive pulleys,flexlight fan.and a cold air kit,then im gonna put a set of either mac shortys or hookers on it with an h-pipe and 2 1/2 inch pipes out the back,then im boltin on a set of street radials. What do you think i will run?
__________________
fear my stock gt!! |
01-14-2002, 12:18 PM | #2 |
Registered Member
Join Date: Jan 2002
Location: carlisle,Ohio
Posts: 5
|
Oh its alos a 5.0 ho and a 5-speed.
__________________
fear my stock gt!! |
01-14-2002, 03:17 PM | #3 |
Registered Member
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
|
I say a 13.9-14.0 with agood Driving
That flexlight fan might be Taking some of the power away But they do work good, Cool the motor Down better than the stock Fan Clutch does
__________________
Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe Drive Train: 3.55, T-5 with a Pro 5.0 shifter 12.656@107.71MPH See It at www.T-racing.com/mustang.htm |
01-15-2002, 03:13 AM | #4 |
Registered Member
Join Date: Dec 2001
Location: Houston TX
Posts: 11
|
depends on the weather and your driving skills but good weather and good driving ill say 14.3-14.5 throw a set of 4.10s and youll be plowing into the 13s.
__________________
Black 1995 mustang 5.0 convertible: Black leather interior, mach 460 sound system, tremic 5 speed, ram clutch, cobra intake, 65mm throttle body, fenderwell cold air induction, 77mm mass air, underdrive pullies, 3..55/1 gear ratio, dino tuned diablosport chip, 24 lb fuel injecters, 190 lph fuel pump. off road h pipe, borla catback, subframe connecters yokohama a520 275/40/17zr (back) a520 255/45/17zzr (front) |
01-15-2002, 11:49 AM | #5 |
Registered Member
Join Date: Jan 2002
Location: carlisle,Ohio
Posts: 5
|
im also puting a hays clutch and hurst shot throw shifter if it makes a differnce.
__________________
fear my stock gt!! |
01-15-2002, 11:50 AM | #6 |
Registered Member
Join Date: Jan 2002
Location: carlisle,Ohio
Posts: 5
|
im thinkin i can run either a 14.0 or a 13.90
__________________
fear my stock gt!! |
01-16-2002, 01:56 PM | #7 |
Registered Member
Join Date: Jan 2002
Location: Wauwatosa,WI
Posts: 64
|
You will be surprised...I agree with Causing Havoc...low to mid 14s...its totally different from the street-launching is different...ect.
Not trying to knock your ideals -just a reality check from someone who was in your shoes...I was so confindent about my skills and mods that 13.8 seemed plausible..not..best I could muster in the 60ft dept was 2.1 and I ran a 14.7 ....by the middle of the summer(a while back) I had it down to consistent 13.9s on slicks with a 1.80 60... Don't be dismayed-practice make perfection..thats where its at...plus slicks help!LOL good luck |
01-16-2002, 02:16 PM | #8 |
Registered Member
Join Date: Jan 2002
Location: carlisle,Ohio
Posts: 5
|
im thinkin a 14.0 or 13.90! I can drive the car pretty good to im able to launch at 4000 rpm with only spuealing the tires a lil bit.
__________________
fear my stock gt!! |
|
|