famaso 9/21 last chance of the year!

46stang · 09-13-2001, 05:28 PM

i called famaso today and they said that next friday and sat. was the last of the street racing this year! they may have one date at the end of oct. but doubted it. that sucks the big one! well i'm definately going to try and go next friday. just letting you guys know if you care to go! later,
Leon

------------------
96 stang,ported 99 heads, 01 bullit intake, 99 cams,Steeda power pullies,Steeda timing adj.,Kirban adj.reg.,Pro-m 87,24#inj.,Twin 57mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,home depot ram air, k@n,
373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter.
271.3rwhp
302.3rwtq
best et 13.80

89cp · 09-13-2001, 06:59 PM

Sounds good.
I'll see if I can tag along.

LfiveohX · 09-17-2001, 11:49 PM

Leon, how long does it take you to get there and what time do they start racing? I might be able to go. Let me know!
Adam

46stang · 09-18-2001, 08:55 PM

it takes 2hours and 15min. at 65-75mph. it's roughly an hour furhter than lacr. I'm leaving friday at 5:00pm. so i should get there by 7:15. they start racing between 7-7:30 and it goes until 11 at night. the track is the best around since they closed pomona. jmho.(haven't been to fontana yet though) i'm not sure about the weather there right now but the track is only 800ft above sea level. you should hook up with 89cp as he lives in oxnard as well, he's a cool guy! he knows how to get there too! i would meet up with you guys but i want to get there as soon as i can and i would be back tracking to oxnard, as you can take the 126frwy to the 5frwy! hope to see you guys there

leon
http://www.famosoraceway.com/schedule.html

------------------
96 stang,ported 99 heads, 01 bullit intake, 99 cams,Steeda power pullies,Steeda timing adj.,Kirban adj.reg.,Pro-m 87,24#inj.,Twin 57mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,home depot ram air, k@n,
373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter.
271.3rwhp
302.3rwtq
best et 13.80

[This message has been edited by 46stang (edited 09-18-2001).]

fastang · 09-19-2001, 02:45 AM

Yeah its a great track, It hooks quite well and is very clean. Its just too damn hot out there, The last time I was there it was over a hundred.

------------------
95GT, TFS T.W. heads, Holley Intake, B303 cam, FRPP 30lb injectors, Scorpion 1.6 rollers, 65mm TB, 73mm MAF, BBK Longtubes, Flowmaster cat back, March Pulleys, MSD coil, 9mm wires, Tremec 3550 trans, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors. 190lph pump, BBK adj FPR.

Skyman · 09-22-2001, 06:59 PM

What'd u run?

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

46stang · 09-24-2001, 06:48 PM

it pretty much sucked! i ran 3 times. all three were 14.0x and my best mph was 101.XX the weather felt pretty cool too.so?? my best 60 foot was a 2.25

(nitto drags) i got better than that on my street tires. a couple of the dragsters blew up, so i think they slimmed the track with oil.?? I'm going to put my crane cams in pretty soon, then i'm just going to have to go to carlsbad and see what it'll do. i think the only way i'm going to get a 12.xx is if i use your slicks sky

i don't feel to bad because there was several new vettes there and they were running 13.8s at 101.xxmph. so i think the track just sucked but it could just be my car??or the driver

on my last run i raced a 5.0, he had an intake, heads, b303cam, exhaust,etc. it sounded real mean

he said he ran a 13.8 last time before the cam and i beat him by half a car. it was a fun race!

------------------
96 stang,ported 99 heads, 01 bullit intake, 99 cams,Steeda power pullies,Steeda timing adj.,Kirban adj.reg.,Pro-m 87,24#inj.,Twin 57mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,home depot ram air, k@n,
373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter.
271.3rwhp
302.3rwtq
best et 13.80

Skyman · 09-24-2001, 06:59 PM

Damn, if those vettes were only trapping 101 then your fine. Soon as my car is going we'll get to carlsbad and slap the slicks on your car and see what happens. If you can get a 1.7 60' out of it I bet a 12.xx is in order.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

09-13-2001, 05:28 PM	#1
46stang Registered Member Join Date: May 1999 Location: moorpark ca Posts: 340	famaso 9/21 last chance of the year! i called famaso today and they said that next friday and sat. was the last of the street racing this year! they may have one date at the end of oct. but doubted it. that sucks the big one! well i'm definately going to try and go next friday. just letting you guys know if you care to go! later, Leon ------------------ 96 stang,ported 99 heads, 01 bullit intake, 99 cams,Steeda power pullies,Steeda timing adj.,Kirban adj.reg.,Pro-m 87,24#inj.,Twin 57mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,home depot ram air, k@n, 373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter. 271.3rwhp 302.3rwtq best et 13.80

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I topped myself this year.......	Pokey 5.0	Blue Oval Lounge	11	05-27-2003 11:28 AM
2002. It Was A Pretty Decent Year	PKRWUD	Blue Oval Lounge	21	01-07-2003 11:45 PM
Newspaper Headlines in the Year 2035	MustangKelly96	Blue Oval Lounge	5	10-10-2002 11:20 PM
1 Year Anniversary In the Tampabay area	FSRN Network	Blue Oval Lounge	0	08-25-2001 06:33 PM

09-13-2001, 06:59 PM	#2
89cp Registered Member Join Date: Jan 2001 Location: _ Posts: 35	Sounds good. I'll see if I can tag along.

09-17-2001, 11:49 PM	#3
LfiveohX Addicted to the 5.0 Join Date: Jun 2001 Location: Oxnard, CA. USA Posts: 117	Leon, how long does it take you to get there and what time do they start racing? I might be able to go. Let me know! Adam

09-18-2001, 08:55 PM	#4
46stang Registered Member Join Date: May 1999 Location: moorpark ca Posts: 340	it takes 2hours and 15min. at 65-75mph. it's roughly an hour furhter than lacr. I'm leaving friday at 5:00pm. so i should get there by 7:15. they start racing between 7-7:30 and it goes until 11 at night. the track is the best around since they closed pomona. jmho.(haven't been to fontana yet though) i'm not sure about the weather there right now but the track is only 800ft above sea level. you should hook up with 89cp as he lives in oxnard as well, he's a cool guy! he knows how to get there too! i would meet up with you guys but i want to get there as soon as i can and i would be back tracking to oxnard, as you can take the 126frwy to the 5frwy! hope to see you guys there leon http://www.famosoraceway.com/schedule.html ------------------ 96 stang,ported 99 heads, 01 bullit intake, 99 cams,Steeda power pullies,Steeda timing adj.,Kirban adj.reg.,Pro-m 87,24#inj.,Twin 57mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,home depot ram air, k@n, 373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter. 271.3rwhp 302.3rwtq best et 13.80 [This message has been edited by 46stang (edited 09-18-2001).]

09-19-2001, 02:45 AM	#5
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	Yeah its a great track, It hooks quite well and is very clean. Its just too damn hot out there, The last time I was there it was over a hundred. ------------------ 95GT, TFS T.W. heads, Holley Intake, B303 cam, FRPP 30lb injectors, Scorpion 1.6 rollers, 65mm TB, 73mm MAF, BBK Longtubes, Flowmaster cat back, March Pulleys, MSD coil, 9mm wires, Tremec 3550 trans, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors. 190lph pump, BBK adj FPR.

09-22-2001, 06:59 PM	#6
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	What'd u run? ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor *332RWHP, 350rwtq*

09-24-2001, 06:48 PM	#7
46stang Registered Member Join Date: May 1999 Location: moorpark ca Posts: 340	it pretty much sucked! i ran 3 times. all three were 14.0x and my best mph was 101.XX the weather felt pretty cool too.so?? my best 60 foot was a 2.25 (nitto drags) i got better than that on my street tires. a couple of the dragsters blew up, so i think they slimmed the track with oil.?? I'm going to put my crane cams in pretty soon, then i'm just going to have to go to carlsbad and see what it'll do. i think the only way i'm going to get a 12.xx is if i use your slicks sky i don't feel to bad because there was several new vettes there and they were running 13.8s at 101.xxmph. so i think the track just sucked but it could just be my car??or the driver on my last run i raced a 5.0, he had an intake, heads, b303cam, exhaust,etc. it sounded real mean he said he ran a 13.8 last time before the cam and i beat him by half a car. it was a fun race! ------------------ 96 stang,ported 99 heads, 01 bullit intake, 99 cams,Steeda power pullies,Steeda timing adj.,Kirban adj.reg.,Pro-m 87,24#inj.,Twin 57mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,home depot ram air, k@n, 373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter. 271.3rwhp 302.3rwtq best et 13.80

09-24-2001, 06:59 PM	#8
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Damn, if those vettes were only trapping 101 then your fine. Soon as my car is going we'll get to carlsbad and slap the slicks on your car and see what happens. If you can get a 1.7 60' out of it I bet a 12.xx is in order. Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor *332RWHP, 350rwtq*