Carlsbad 09/15 - Page 2

fastang · 09-08-2001, 12:41 AM

Sorry guys I cant make it to Fontana on the 8th. But I will be at Carlsbad on the 15th! My car isnt done yet. I got the heads on, the headers bolted up and the rockers adjusted. But I still have to slap the intake and valve covers on and replace a leaky radiatior. Should finish it all on Sunday and be at the track with you guys on the 15th. Sky, You've got my cell #. Call me up before you go.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

MMLX · 09-12-2001, 04:44 PM

I am going to try to make it out this weekend, I went last saturday but I blew my clutch on the first run, it broke about half way through 3rd gear, I still managed to coast through at a 13.0 at 80 somethin MPH first time on the squeeze, clutch couldn't handle it, I was fairly happy with the 60ft time too it was a 2.0 with a 8.1 1/8 so hopefull I can run a mid 12 with a stout clutch, will be installing tomorrow, so I hope to see you guys there.

------------------
89lx, Edelbrock Performer Heads, Edelbrock performer Intake,Comp Cams Extreme Energy cam, BBK 65mm TB,73mm Mass Air,24lb Injectors,255lph fuel pump,373's,full maximum motorsports suspension system,baer 5 lug conversion with cross drilled rotors, 17x9 cobra "r" rims,JBA shorties,bbk offroad h-pipe,flowmaster w\dumps,underdrive pullies,moroso cold air,275/40/17 BFG Drag radials.
(Big Shot coming soon)

KenI · 09-13-2001, 06:30 PM

Isn't the Saleen show on the 15th?

Skyman · 09-15-2001, 01:57 AM

I can't make it... my jackstands are gone, I was gonna fix my car tonight, but they are ******* missing.

**** I will fix it sunday at my friends house... so we gotta go again soon guys.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

ed1371 · 09-15-2001, 02:27 AM

damn it sky! lol

thats ok, I just got back and really didn't feel like driving out again...next weekend ok?
I got my tires and DAMN they are W I D E !
cant wait to run them!

MMLX · 09-15-2001, 05:53 PM

they are running tomorrow too, gate opens at 8AM street car shoot out.

------------------
89lx, Edelbrock Performer Heads, Edelbrock performer Intake,Comp Cams Extreme Energy cam, BBK 65mm TB,73mm Mass Air,24lb Injectors,255lph fuel pump,373's,full maximum motorsports suspension system,baer 5 lug conversion with cross drilled rotors, 17x9 cobra "r" rims,JBA shorties,bbk offroad h-pipe,flowmaster w\dumps,underdrive pullies,moroso cold air,275/40/17 BFG Drag radials.
(Big Shot coming soon)

ed1371 · 09-16-2001, 02:38 AM

If i had known that earlier I would have gone tommorrow!

Guess I have to wait a week...

fastang · 09-17-2001, 12:51 AM

This is GREAT! I had planned on going yesterday and meeting you guys down there but MY SHITS NOT FITTING!

My upper intake is hitting my valve covers!! Even with a 3/8 inch spacer it hits. I ordered a 1 inch spacer on wednesday but they have to pony express the damn thing here from Ohio because all the planes were down from the national disaster on Tues. It should be here by this Wednesday and I hope to have it all ready and meet you guys next Saturday.

------------------
95GT, TFS T.W. heads, Holley Intake, B303 cam, FRPP 30lb injectors, Scorpion 1.6 rollers, 65mm TB, 73mm MAF, BBK Longtubes, Flowmaster cat back, March Pulleys, MSD coil, 9mm wires, Tremec 3550 trans, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors. 190lph pump, BBK adj FPR.

fastang · 09-17-2001, 12:55 AM

P.S. Anyone wanna guess what Im gonna hit at Carlsbads slick *** track without a dyno tune? Ill be on 225 Nitto D.R.'s

ed1371 · 09-17-2001, 04:56 PM

I dunno, thats a whole lot o new stuff in your sig! I DO know however, that you were having a hell of a time hooking up before with a lot less engine!

I tried my 275's and WHOA do they hook...I'll see next sat just how much!

Skyman · 09-17-2001, 06:45 PM

**** yeah! I can't wait guys! This is gonna be fun. Im having some trouble getting somewhere to work on my car. I basically got kicked out of my house yesturday. Anyways... Iwll do everything it takes to get this stuff fixed up... Damn oil pump!

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

Skyman · 09-17-2001, 06:48 PM

Jesse, you can borrow my slicks for a run too if you like...

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

46stang · 09-17-2001, 09:37 PM

hey sky if you can get your car to my house in moorpark you can work on it in my drive way. i would let you use the garage but too much crap in it

like my bug

Leon

------------------
96 stang,ported 99 heads, 01 bullit intake, 99 cams,Steeda power pullies,Steeda timing adj.,Kirban adj.reg.,Pro-m 87,24#inj.,Twin 57mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,home depot ram air, k@n,
373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter.
271.3rwhp
302.3rwtq
best et 13.80

fastang · 09-17-2001, 09:48 PM

Quote:

Originally posted by Skyman:
Jesse, you can borrow my slicks for a run too if you like...

Skyler

Are you sure they will fit? Will the backspacing be correct? Are they 5 lug? I really really wanna make a pass on them. I hear that if they expand and catch your fender that they will throw you into the wall halfway down the track...I REALLY dont want that to happen

.

Ed,good luck man, BTW are your wheels 4 or 5 lug? These little 225's hook ok for daily driven street tires but I need some more meat for the track.

------------------
95GT, TFS T.W. heads, Holley Intake, B303 cam, FRPP 30lb injectors, Scorpion 1.6 rollers, 65mm TB, 73mm MAF, BBK Longtubes, Flowmaster cat back, March Pulleys, MSD coil, 9mm wires, Tremec 3550 trans, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors. 190lph pump, BBK adj FPR.

ed1371 · 09-18-2001, 03:27 PM

I am running 4 lug with those damn tires!

-ed

fastang · 09-19-2001, 02:42 AM

Quote:

Originally posted by ed1371:
I am running 4 lug with those damn tires!

-ed

Ouch! Well, at least its not a Camaro rear end

------------------
95GT, TFS T.W. heads, Holley Intake, B303 cam, FRPP 30lb injectors, Scorpion 1.6 rollers, 65mm TB, 73mm MAF, BBK Longtubes, Flowmaster cat back, March Pulleys, MSD coil, 9mm wires, Tremec 3550 trans, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors. 190lph pump, BBK adj FPR.

ed1371 · 09-20-2001, 08:43 AM

So who's going this weekend? where you want to meet? We should get something to eat first.

Skyman · 09-21-2001, 02:17 AM

Leon- Thanks, I am trying to get it fixed tomrrow if I can. I have no way to get it there really though.

Jesse- They are 5 lug. They should be fine. I ran tires that stuck out farther than the wheel well and they hit before. No big deal except for some burning rubber on the fender. I saw a guy in a 98 camaro runnning 28" et street thats were sticking out and rubbing. MAN did they smoke on the lanch as they grinded into his fenders. Ive never had any problems. If we try em we can see if they are gonna work anyways.

I will know tomrrow afternoon if I am gonna be able to make it or not.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

Kevin Price · 09-21-2001, 08:06 AM

O.K. guys, think this one has gone on long enough to where it is no longer pertinent to the Street Racers Corner.

Thread Closed

------------------
SVO siamesed 351 stroked to 417ci,Yates heads, solid roller,Trans King glide and a little blue bottle
of giggle gas. My Car

Skyman · 09-21-2001, 10:31 PM

Just wondering why you would close it the day before we go Kevin? I could see tomrrow night or sunday, but why the day before?

Thanks...

Sky

Thread Opened

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

[This message has been edited by Skyman (edited 09-21-2001).]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lets do a ford vs chevy meet/cruise to carlsbad on sept. 14th	46stang	Ford Show & Go	10	08-12-2002 11:43 PM
Carlsbad track is a myth!	The Deuce	Stang Stories	6	06-10-2002 05:29 PM
Carlsbad..... RIP	Skyman	Stang Stories	16	10-10-2001 05:26 PM
Carlsbad 8/11	withamc	Stang Stories	1	08-10-2001 04:26 PM
Carlsbad results....	Skyman	Stang Stories	15	07-10-2001 04:52 PM

09-08-2001, 12:41 AM	#21
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	Sorry guys I cant make it to Fontana on the 8th. But I will be at Carlsbad on the 15th! My car isnt done yet. I got the heads on, the headers bolted up and the rockers adjusted. But I still have to slap the intake and valve covers on and replace a leaky radiatior. Should finish it all on Sunday and be at the track with you guys on the 15th. Sky, You've got my cell #. Call me up before you go. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

09-12-2001, 04:44 PM	#22
MMLX Registered Member Join Date: Jul 2001 Location: SanDiego,CA,USA Posts: 29	I am going to try to make it out this weekend, I went last saturday but I blew my clutch on the first run, it broke about half way through 3rd gear, I still managed to coast through at a 13.0 at 80 somethin MPH first time on the squeeze, clutch couldn't handle it, I was fairly happy with the 60ft time too it was a 2.0 with a 8.1 1/8 so hopefull I can run a mid 12 with a stout clutch, will be installing tomorrow, so I hope to see you guys there. ------------------ 89lx, Edelbrock Performer Heads, Edelbrock performer Intake,Comp Cams Extreme Energy cam, BBK 65mm TB,73mm Mass Air,24lb Injectors,255lph fuel pump,373's,full maximum motorsports suspension system,baer 5 lug conversion with cross drilled rotors, 17x9 cobra "r" rims,JBA shorties,bbk offroad h-pipe,flowmaster w\dumps,underdrive pullies,moroso cold air,275/40/17 BFG Drag radials. (Big Shot coming soon)

09-13-2001, 06:30 PM	#23
KenI Registered Member Join Date: May 2000 Location: El Cajon, CA Posts: 77	Isn't the Saleen show on the 15th?

09-15-2001, 01:57 AM	#24
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	I can't make it... my jackstands are gone, I was gonna fix my car tonight, but they are ***** missing. I will fix it sunday at my friends house... so we gotta go again soon guys. Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor 332RWHP, 350rwtq**

09-15-2001, 02:27 AM	#25
ed1371 Registered Member Join Date: Feb 2000 Posts: 469	damn it sky! lol thats ok, I just got back and really didn't feel like driving out again...next weekend ok? I got my tires and DAMN they are W I D E ! cant wait to run them!

09-15-2001, 05:53 PM	#26
MMLX Registered Member Join Date: Jul 2001 Location: SanDiego,CA,USA Posts: 29	they are running tomorrow too, gate opens at 8AM street car shoot out. ------------------ 89lx, Edelbrock Performer Heads, Edelbrock performer Intake,Comp Cams Extreme Energy cam, BBK 65mm TB,73mm Mass Air,24lb Injectors,255lph fuel pump,373's,full maximum motorsports suspension system,baer 5 lug conversion with cross drilled rotors, 17x9 cobra "r" rims,JBA shorties,bbk offroad h-pipe,flowmaster w\dumps,underdrive pullies,moroso cold air,275/40/17 BFG Drag radials. (Big Shot coming soon)

09-16-2001, 02:38 AM	#27
ed1371 Registered Member Join Date: Feb 2000 Posts: 469	If i had known that earlier I would have gone tommorrow! Guess I have to wait a week...

09-17-2001, 12:51 AM	#28
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	This is GREAT! I had planned on going yesterday and meeting you guys down there but MY SHITS NOT FITTING! My upper intake is hitting my valve covers!! Even with a 3/8 inch spacer it hits. I ordered a 1 inch spacer on wednesday but they have to pony express the damn thing here from Ohio because all the planes were down from the national disaster on Tues. It should be here by this Wednesday and I hope to have it all ready and meet you guys next Saturday. ------------------ 95GT, TFS T.W. heads, Holley Intake, B303 cam, FRPP 30lb injectors, Scorpion 1.6 rollers, 65mm TB, 73mm MAF, BBK Longtubes, Flowmaster cat back, March Pulleys, MSD coil, 9mm wires, Tremec 3550 trans, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors. 190lph pump, BBK adj FPR.

09-17-2001, 12:55 AM	#29
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	P.S. Anyone wanna guess what Im gonna hit at Carlsbads slick *** track without a dyno tune? Ill be on 225 Nitto D.R.'s

09-17-2001, 04:56 PM	#30
ed1371 Registered Member Join Date: Feb 2000 Posts: 469	I dunno, thats a whole lot o new stuff in your sig! I DO know however, that you were having a hell of a time hooking up before with a lot less engine! I tried my 275's and WHOA do they hook...I'll see next sat just how much!

09-17-2001, 06:45 PM	#31
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	** yeah! I can't wait guys! This is gonna be fun. Im having some trouble getting somewhere to work on my car. I basically got kicked out of my house yesturday. Anyways... Iwll do everything it takes to get this stuff fixed up... Damn oil pump! Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor 332RWHP, 350rwtq**

09-17-2001, 06:48 PM	#32
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Jesse, you can borrow my slicks for a run too if you like... Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor *332RWHP, 350rwtq*

09-17-2001, 09:37 PM	#33
46stang Registered Member Join Date: May 1999 Location: moorpark ca Posts: 340	hey sky if you can get your car to my house in moorpark you can work on it in my drive way. i would let you use the garage but too much crap in it like my bug Leon ------------------ 96 stang,ported 99 heads, 01 bullit intake, 99 cams,Steeda power pullies,Steeda timing adj.,Kirban adj.reg.,Pro-m 87,24#inj.,Twin 57mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,home depot ram air, k@n, 373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter. 271.3rwhp 302.3rwtq best et 13.80

09-18-2001, 03:27 PM	#35
ed1371 Registered Member Join Date: Feb 2000 Posts: 469	I am running 4 lug with those damn tires! -ed

09-20-2001, 08:43 AM	#37
ed1371 Registered Member Join Date: Feb 2000 Posts: 469	So who's going this weekend? where you want to meet? We should get something to eat first.

09-21-2001, 02:17 AM	#38
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Leon- Thanks, I am trying to get it fixed tomrrow if I can. I have no way to get it there really though. Jesse- They are 5 lug. They should be fine. I ran tires that stuck out farther than the wheel well and they hit before. No big deal except for some burning rubber on the fender. I saw a guy in a 98 camaro runnning 28" et street thats were sticking out and rubbing. MAN did they smoke on the lanch as they grinded into his fenders. Ive never had any problems. If we try em we can see if they are gonna work anyways. I will know tomrrow afternoon if I am gonna be able to make it or not. Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor *332RWHP, 350rwtq*

09-21-2001, 08:06 AM	#39
Kevin Price Registered Member Join Date: Jan 1999 Location: Oxford, KS Posts: 935	O.K. guys, think this one has gone on long enough to where it is no longer pertinent to the Street Racers Corner. Thread Closed ------------------ SVO siamesed 351 stroked to 417ci,Yates heads, solid roller,Trans King glide and a little blue bottle of giggle gas. My Car

09-21-2001, 10:31 PM	#40
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Just wondering why you would close it the day before we go Kevin? I could see tomrrow night or sunday, but why the day before? Thanks... Sky Thread Opened ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor *332RWHP, 350rwtq* [This message has been edited by Skyman (edited 09-21-2001).]