Next SO CAL race day? - Page 3

fastang · 06-18-2001, 10:30 AM

I'm definitly not. I'll cruize down, get a room and meet you guys later but I cant race till Saturday. Saturday is open for 3 more hours too

Skyman · 06-18-2001, 03:07 PM

Im in friday. Id stick around saturday too, but my G/F can't get it off work. I wish I could. But I'll still see you all friday.

Skyler

------------------
-1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows.
12.55@107mph
50-175 Nitrous Works WET Kit just added.

fastang · 06-18-2001, 07:42 PM

Hey Sky, are you going to let me know about that business oportunity?

Skyman · 06-18-2001, 07:57 PM

Yea, I'll talk to you about it there.

Skyler

------------------
-1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows.
12.55@107mph
50-175 Nitrous Works WET Kit just added.

withamc · 06-19-2001, 12:29 AM

Cool. My buddy's bringing his (98 or 99, I'm not sure) Ram Air Firebird. I'm driving a red '93 GT, tall blond wife with me. See you there.

fastang · 06-19-2001, 01:10 PM

Sky, Do you have a cell phone? If you do could you send me a private message with the number so I can get ahold of you when I get there? Anyone want to see Fast n Furious up there?

withamc · 06-20-2001, 01:07 AM

Hey anybody who's run there before - what's the deal once you get in the gate? Get in line for a safety check and get a number? Do you just run whoever they line you up with or can you line up against a friend? When they say full shirt do they mean long sleeves or is a t-shirt OK? If you can't tell, I'm new at this.

Skyman · 06-21-2001, 11:04 PM

NO NO NOooo.........

Well... I worked my *** off all day, running all over Ventura County to try and get gaskets. I finally do. And the EGR gets in the way of the fuel line hooking up to the Nitrous Plate. So I tried putting it infront of the Throttle Body. But the thorttle cable attachment got in the way then. Then I find I need a driveshaft safetly look for bakersfield. I bought one of those too. Ive tried everything can't get the damn NOS hooked up.

Im trailer the car to bottle blown racing tomrrow, they are going to fix it up some how, and then they are going to put a full roll cage in the car too. As I'll be in the 11's now.

So I can't go tomorrow. Im so pissed I worked all damn day the last 2 days tryin to get my car ready. But it will be ready after this weekend for next time.

Skyler

------------------
-1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows.
12.55@107mph
50-175 Nitrous Works WET Kit just added.

withamc · 06-22-2001, 10:20 AM

That sucks Skyler. I was hoping to finally meet you and see you run. Well I'll let you know what I run. I'm guessing mid 13's, I don't know. Depends on whether I suck at launching or not. I seem to do best when I launch at 1500 and feather the clutch till I kinda hook and then just mash it. Still spins through 1st. I'm running Yokohamas.
I can't seem to get a straight answer from that lady at Famoso about helmets. I told her I've got a Snell M95 rated helmet, she says that's OK, then tells my friend that the Snell SA2000 helmet he just bought won't do. I think she's just reading straight out of a book and has no clue.

------------------
93 GT, CCM long block, GT40P heads, Crane 2031, 1.7 RR's, Moroso cold air, 73mm Vortech, 65mm TB, Cobra intake, 24# injectors, MSD 6AL, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s, B&M Ripper shifter, Black Magic fan

[This message has been edited by withamc (edited 06-22-2001).]

fastang · 06-22-2001, 02:49 PM

Well I'm definitely going tommorow. If anyone wants to join me thats great.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

withamc · 06-22-2001, 04:37 PM

fastang - if you're going up tonight look for me - red '93 GT, license plate 3EET813.

Chris

------------------
93 GT, CCM long block, GT40P heads, Crane 2031, 1.7 RR's, Moroso cold air, 73mm Vortech, 65mm TB, Cobra intake, 24# injectors, MSD 6AL, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s, B&M Ripper shifter, Black Magic fan

fastang · 06-22-2001, 04:52 PM

I was originaly going to go up tonight and visit Sky because he was going to tell me something about his cpu company, but since he's not going to go now I changed my hotel reservations and am going up tommorow.
I doubt it but is ANYONE going tommorow? If not look for me to post some crap about my times on Sunday.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

withamc · 06-23-2001, 04:43 AM

Well, post your crap along with me (Famoso results)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oct.11 Mid-Mich Toys for Tots Benefit drag race	Doug Dornbos	Ford Show & Go	0	09-29-2003 02:24 PM
I wanna drag race..... they wanna road race	Rev	Stang Stories	19	10-09-2002 03:11 PM
MY FIRST RACE!!!	#1 Pony	Stang Stories	7	07-01-2002 07:55 AM
Biggest Race I've Ever Had. 440vs302	Skyman	Stang Stories	51	03-02-2002 05:40 PM
Best race EVER!! Im still shaking.. :-D	Skyman	Stang Stories	28	02-27-2001 12:05 AM

06-18-2001, 10:30 AM	#41
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	I'm definitly not. I'll cruize down, get a room and meet you guys later but I cant race till Saturday. Saturday is open for 3 more hours too

06-18-2001, 03:07 PM	#42
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Im in friday. Id stick around saturday too, but my G/F can't get it off work. I wish I could. But I'll still see you all friday. Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows. 12.55@107mph 50-175 Nitrous Works WET Kit just added.

06-18-2001, 07:42 PM	#43
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	Hey Sky, are you going to let me know about that business oportunity?

06-18-2001, 07:57 PM	#44
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Yea, I'll talk to you about it there. Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows. 12.55@107mph 50-175 Nitrous Works WET Kit just added.

06-19-2001, 12:29 AM	#45
withamc Registered Member Join Date: Aug 2000 Location: Thousand Oaks, CA Posts: 396	Cool. My buddy's bringing his (98 or 99, I'm not sure) Ram Air Firebird. I'm driving a red '93 GT, tall blond wife with me. See you there.

06-19-2001, 01:10 PM	#46
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	Sky, Do you have a cell phone? If you do could you send me a private message with the number so I can get ahold of you when I get there? Anyone want to see Fast n Furious up there?

06-20-2001, 01:07 AM	#47
withamc Registered Member Join Date: Aug 2000 Location: Thousand Oaks, CA Posts: 396	Hey anybody who's run there before - what's the deal once you get in the gate? Get in line for a safety check and get a number? Do you just run whoever they line you up with or can you line up against a friend? When they say full shirt do they mean long sleeves or is a t-shirt OK? If you can't tell, I'm new at this.

06-21-2001, 11:04 PM	#48
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	NO NO NOooo......... Well... I worked my * off all day, running all over Ventura County to try and get gaskets. I finally do. And the EGR gets in the way of the fuel line hooking up to the Nitrous Plate. So I tried putting it infront of the Throttle Body. But the thorttle cable attachment got in the way then. Then I find I need a driveshaft safetly look for bakersfield. I bought one of those too. Ive tried everything can't get the damn NOS hooked up. Im trailer the car to bottle blown racing tomrrow, they are going to fix it up some how, and then they are going to put a full roll cage in the car too. As I'll be in the 11's now. So I can't go tomorrow. Im so pissed I worked all damn day the last 2 days tryin to get my car ready. But it will be ready after this weekend for next time. Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows. 12.55@107mph** 50-175 Nitrous Works WET Kit just added.

06-22-2001, 10:20 AM	#49
withamc Registered Member Join Date: Aug 2000 Location: Thousand Oaks, CA Posts: 396	That sucks Skyler. I was hoping to finally meet you and see you run. Well I'll let you know what I run. I'm guessing mid 13's, I don't know. Depends on whether I suck at launching or not. I seem to do best when I launch at 1500 and feather the clutch till I kinda hook and then just mash it. Still spins through 1st. I'm running Yokohamas. I can't seem to get a straight answer from that lady at Famoso about helmets. I told her I've got a Snell M95 rated helmet, she says that's OK, then tells my friend that the Snell SA2000 helmet he just bought won't do. I think she's just reading straight out of a book and has no clue. ------------------ 93 GT, CCM long block, GT40P heads, Crane 2031, 1.7 RR's, Moroso cold air, 73mm Vortech, 65mm TB, Cobra intake, 24# injectors, MSD 6AL, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s, B&M Ripper shifter, Black Magic fan [This message has been edited by withamc (edited 06-22-2001).]

06-22-2001, 02:49 PM	#50
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	Well I'm definitely going tommorow. If anyone wants to join me thats great. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

06-22-2001, 04:37 PM	#51
withamc Registered Member Join Date: Aug 2000 Location: Thousand Oaks, CA Posts: 396	fastang - if you're going up tonight look for me - red '93 GT, license plate 3EET813. Chris ------------------ 93 GT, CCM long block, GT40P heads, Crane 2031, 1.7 RR's, Moroso cold air, 73mm Vortech, 65mm TB, Cobra intake, 24# injectors, MSD 6AL, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s, B&M Ripper shifter, Black Magic fan

06-22-2001, 04:52 PM	#52
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	I was originaly going to go up tonight and visit Sky because he was going to tell me something about his cpu company, but since he's not going to go now I changed my hotel reservations and am going up tommorow. I doubt it but is ANYONE going tommorow? If not look for me to post some crap about my times on Sunday. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

06-23-2001, 04:43 AM	#53
withamc Registered Member Join Date: Aug 2000 Location: Thousand Oaks, CA Posts: 396	Well, post your crap along with me (Famoso results)