CALLING ALL DRAG RACERS FROM SO-CAL!

[fastang]

MW VS The Corral huh, sounds good, I dont care as long as Im racing. I want to see who inferno brings. If everything falls into place I should have nittos on the rear for march Expensive *** tires, 125.00 a piece. I would like to meet up and caravan too. That a real good idea. With all the people we bring with us it could get pretty huge! Should I invite the folks at LS1.com too? Pat, your car sounds pretty sweet. Im looking forward to seeing how you run, maybe we could line em up since we both have similar cars?

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[KenI]

Sounds good to me.

------------------
------------------
95 Blown Cobra
#83 of 4005

------------------

[Skyman]

KenI, thats good your in. Whats done to your car besides the blower? Any idea now of what it runs?

This sounds like its gonna be fun!

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Daily Driver
STOCK-1994 Integra LS
15.48@91mph

[fastang]

OK, so far we have:
1. fastang (me)
2. withamc
3. inferno (maybe)
4. Patrick Boettichler
5. Skyman
6. ed1371
7. slprlx
8. KenI
Come on folks sign up!

[slprlx]

skyman has my email... I can meet up with his group as they come thru LA... or hell I can meet in Thousand Oaks (even tho its the opposite way), but I dunno how much racing I will be doing... this new aod is slow as F^)(*&^*CK compared to my old lx <sob>... never got a chance to run you skyler... oh well.. now you'll win!

Jason

------------------
1992 LX Hatch <ripped uca out of rear... rip>
1988 AOD GT Midnight Blue
couple of mods...
http://www-scf.usc.edu/~jlister/mustang.htm

[KenI]

Last time I was at Carlsbad I spun my ballancer. The car ran like crap after that. I was only able to run 13.5 @ 108 on street tires. I would like to see it closer to 13 flat.
Its a stock long block with shorties, 65mm Tbody, 80mm MAF, X-pipe w/cats, Vortech Strim 8#,MSD 6AL,3.55s.

------------------
------------------
95 Blown Cobra
#83 of 4005

------------------

[fastang]

Im totaly jealous Ken.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[Skyman]

Did everyone recieve the email that I sent out?

I used the email you have registered on MW. If it is no good anymore let me know.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Daily Driver
STOCK-1994 Integra LS
15.48@91mph

[KenI]

[QUOTE]Im totaly jealous Ken. [/QUOTE}
Stop it. You'll make me blush.

------------------
------------------
95 Blown Cobra
#83 of 4005

------------------

[fastang]

Sky, send me a personal message here or at pugslyann@hotmail.com Im havin probs with my other one, thanks.

[ricekilla]

i dont know if any of you remember me but i sold my 90 GT a few weeks ago and i am looking for a sn-95. maybe i'll cruise next time. you still want a dsm sky? i pity the fool.

------------------
my speed addiction outlet: 90 GT 3.73,s full exhaust, ignition, pullies, and all the other bolt-ons.


my "pimp" ricer: nissan 240 sx SE NISMO POWER BABY!!!!

[Patrick Boetticher]

I know, we are going to calsbad, some on had mentioned they went to the Camarillo Street races, the location has changed...

------------------
PPG Torch Red 95GT, Ported Explorer Intake, E-303 cam, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 19# Racing Injectors, AFS 10.5" Cobra R's, Nitto 555's, Eclipse & JL Stereo System... I just sold My K&N, It looks funny with Stock Air Box & filter!!!

[fastang]

Hey Pat, whats your car running in the quarter? Does anyone else want to go on the 24th of this month too? Im probably going to go and I know a lot of others who are going too.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[Patrick Boetticher]

the last time i ran a 15.3 at LACR, so that is about a what a 14.8 corrected... that was just with pulleys so i have no idea what i run now, hopefully allot faster.
Ill try to get i off for this month!!!

[This message has been edited by Patrick Boetticher (edited 02-16-2001).]

[Skyman]

RiceKilla- !! I thought you had disappeared man. **** Yeah I still want a DSM, I found a 1990 Talon Turbo for $1500 or best offer in Pomona. (626) area code, that I wanna check out..

Find a stang and come down w/ us.

Patrick- Screw LACR! Thats the worst track I've ever been to in my life. My first run out there I ran 14.3@98mph in 65 degree weather. Second run 13.8@100 and then I said screw it! and I left.
I made low 13's at pomona given 40degrees hotter weather!! So go figure. That track is **** . I lost probably close to 7-8mph on my MPH there.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Daily Driver
STOCK-1994 Integra LS
15.48@91mph

[ed1371]

I got 2 coming from Yuma... Maybe more...

whats the count now? this is going to kick a$$

[fastang]

OK so the REAL date is MARCH 24TH. My friend with the SS that I posted about is going next week on the 24th of this month and he is bringing a few stangs with him. Anyone else want to go? Maybe you Sky? Lemme know.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[Skyman]

Anyone feel like doing a 65mm to 70mm TB swap just for fun to see how it actually performs at the track?

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft, ripper shifter, and turndowns.
13.2@106mph

Shooting for 12's and a 351 slowly in the works!

Stock-94 Integra 15.48@91mph

[fastang]

Maybe, Bring the TB and tools and I will Bring my car. It might help out my cam, but I have read that it doesnt make much of a difference and can actualy hurt your et if not set up right.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

[46stang]

I definately want to go. I have to work march 24, but maybe I can swap weekends with one of the other guys. I'll know for sure a couple weeks before the 24th. It sounds like fun meeting up with all you Ventura locals and caravaning down.

------------------
96 stang,ported 99 heads, 99 intake, 99 cams, 373's, 70mm t/b, gutted maf, bassani x-pipe w/cats, ultraflow catback,iat mod, home depot ram air, k@n. fms spings, tri-ax shifter.