CALLING ALL DRAG RACERS FROM SO-CAL! - Page 3

CobraMan · 02-20-2001, 01:28 AM

Ya, I'll be there too. I'm in the Woodland Hills/West Hills/Calabasas area... to give some kind of idea. I might get some more guys to go-- with stangs. Count me in

-Andrew

Skyman · 02-20-2001, 02:14 AM

What are you driving cobra man? Are you going both times or just the MARCH 24th?

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, E-303 Cam, Edelbrock Intake, and a whole lot more.
13.2@106mph
-Shooting for 12's and a 351 slowly in the works!

Stock-94 Integra 15.48@91mph

fastang · 02-20-2001, 01:07 PM

Sky, Ive got some good news and some bad, The bad news is that I cant make it next weekend bc I gotta work

But the good news is that I need new U joints so Im getting an aluminum ds with the good joints

So next month I will defintely be there ready to run

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

Skyman · 02-20-2001, 10:51 PM

Same for me actually, so that turns out fine. The final date is march 24th. I'd like to get everyones current email addresses if the one they have in their registry on here isnt current so we can figure out a way to all meet up on the way down there and caravan.

Hopefully I'll get my race seats and stuff in by then.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, E-303 Cam, Edelbrock Intake, and a whole lot more.
13.2@106mph
-Shooting for 12's and a 351 slowly in the works!

Stock-94 Integra 15.48@91mph

fastang · 02-20-2001, 11:59 PM

Sky, Email me at dymples797@aol.com. Thats my girls address. Im having probs with mine. Or just send me a personal message here. So far we have about 10 people from here plus all the people were bringing. Its gonna be so big were not even going to get a pass in!lol I hope I can get a set of nittos for this too. I should have an aluminum ds, controll arm set, longtubes, flows and nittos installed by this time next month, maybe I will pull a 12 too

(I doubt it)

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

withamc · 02-21-2001, 01:37 AM

SKYMAN - I assume you'll be coming down the 101, so we'll just figure out a way to hook up as you come thru Thousand Oaks. Trade cell phone #'s or something. I'm looking forward to this - never been to a strip before, just stoplights. How much does it cost to race?

------------------
86 GT, GT40P heads, Crane 2031 installed & waiting on longer pushrods, 1.7 RR's, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s.

[This message has been edited by withamc (edited 02-21-2001).]

fastang · 02-21-2001, 12:17 PM

I believe its only ten bucks

ed1371 · 02-21-2001, 12:19 PM

$12 to get in, $10 to race

$22 total for 5 hours at the track

Anyone going to be there this weekend too?

fastang · 02-21-2001, 06:27 PM

What at rip off! Pomona was cheaper and better!

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

46stang · 02-21-2001, 06:50 PM

yea but pomona was allways packed

Shoot i would get to pomona at 6:45am and it would be sold out by 7:00am, when it actually opened, then i wouldnt get to my first race until nearly noon or later. that sucked. I've never been to carlsbad so hopefully it wont be that bad.

------------------
96 stang,ported 99 heads, 99 intake, 99 cams,Steeda power pullies, 373's, 70mm t/b, gutted maf, bassani x-pipe w/cats, ultraflow catback,iat mod, home depot ram air, k@n. fms spings, tri-ax shifter.

slprlx · 02-22-2001, 12:06 AM

I didnt get an email skyman... but anyways-->

I will be able to come March 24th with a couple buddies from Fresno, CA.. so that should be fun. I need to get in the caravan that is coming from the t.o./camarillo area as well... gimme an email at jlister@usc.edu

thanks
Jason

------------------
1992 LX Hatch <ripped uca out of rear... rip>
1988 AOD GT Midnight Blue
couple of mods...
http://www-scf.usc.edu/~jlister/mustang.htm

Skyman · 02-22-2001, 02:43 AM

I emailed everyone from this post.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, E-303 Cam, Edelbrock Intake, and a whole lot more.
13.2@106mph
-Shooting for 12's and a 351 slowly in the works!

Stock-94 Integra 15.48@91mph

NO SLO PK · 02-24-2001, 05:18 PM

Sounds like a blast. Unfortunately my 'stang needs a clutch and tranny

.

Can I bring my Lightning instead???

------------------
'91 LX
Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

fastang · 02-24-2001, 06:08 PM

NO SO POK: Yes! bring your Lightning. I want to run one. I drove one the other day and I loved it. I dont think it was as fast as my stang but I could be wrong since I have heard of a few hitting 13.6's stock. I want to run or just compare timeslips.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

NO SLO PK · 02-24-2001, 07:04 PM

Uh well, my Lightning is a '94 so it isn't going to be turning 13s any time soon. Man how I wished I could get my LX fixed in time (sigh) !!

------------------
'91 LX
Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

Skyman · 02-25-2001, 12:33 AM

Can't get the clutch/tranny in in time or what?
Theres 4 weeks left still.

Skyler

------------------
-1989 Saleen Mustang #406-TFS Heads, E-303 Cam, Edelbrock Intake, and more.
-Videos (MPEG)-
0-110MPH In car view (963k)
All Throttle through 3 gears! (497k)
Tire Smoking Burnout! (218k)

fastang · 02-25-2001, 03:12 AM

Sky, I just read you E mails, Can I meet you guys a little further down the road? I think Im a little further south than T.O. Will those slicks fit on my car? I have 5lug but my car is lowered a quarter inch in the rear and I will have a set of controll arms on. I think it will still clear though.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

NO SLO PK · 02-25-2001, 11:05 AM

Quote:

Originally posted by Skyman:
Can't get the clutch/tranny in in time or what?

Well, it's going to cost $2000+ for a new Tremec TKO, and property taxes are coming due

. So it's going to take me more time to get the funds to make the lx run. I know I sound whiny and sad about this, but it is bumming me out. Anyone want to lend me the cash?

------------------
'91 LX
Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

Skyman · 02-25-2001, 07:12 PM

I think the 5lug spacing we have is the same. The rims the tires are on now have horrible back spacing. They stick out like crazy. Thats ok though, cuz it pretty much means they are guaranteed to fit, cuz they stick out instead of in. If your only lowered .25" thats nothing..

Skyler

------------------
-1989 Saleen Mustang #406-TFS Heads, E-303 Cam, Edelbrock Intake, and more.
-Videos (MPEG)-
0-110MPH In car view (963k)
All Throttle through 3 gears! (497k)
Tire Smoking Burnout! (218k)

Patrick Boetticher · 02-25-2001, 10:34 PM

ill be at the Toys R us PArking lot in TO at 9:45 or so with some guys from Camarillo And WITHAMC,and other people from the chat room!!! so far my count from guys from CAmarillo is 4 including me..

------------------
PPG Torch Red 95GT, Ported Explorer Intake, E-303 cam, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 19# Racing Injectors, AFS 10.5" Cobra R's, Nitto 555's, Eclipse & JL Stereo System... I just sold My K&N, It looks funny with Stock Air Box & filter!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jury Convicts Drag Racers	20LbsBoost	Stang Stories	46	11-12-2003 12:45 PM
Tips for you drag racers	Eric4Nitrous	Windsor Power	22	12-01-2002 05:39 PM
New 1/4 mile ET from the drag strip!!!!!!!!!!	Fox Body	Blue Oval Lounge	18	03-11-2002 05:22 AM
Attention Drag Radial Racers	Jeff Chambers	Racer's Club House	3	04-16-2001 07:05 PM
Calling all drag racers from SoCal (the sequel)	ed1371	Blue Oval Lounge	2	03-11-2001 02:16 PM

02-20-2001, 01:28 AM	#41
CobraMan Registered Member Join Date: Nov 1998 Location: CA, USA Posts: 15	Ya, I'll be there too. I'm in the Woodland Hills/West Hills/Calabasas area... to give some kind of idea. I might get some more guys to go-- with stangs. Count me in -Andrew

02-20-2001, 02:14 AM	#42
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	What are you driving cobra man? Are you going both times or just the MARCH 24th? Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, E-303 Cam, Edelbrock Intake, and a whole lot more. 13.2@106mph -Shooting for 12's and a 351 slowly in the works! Stock-94 Integra 15.48@91mph

02-20-2001, 01:07 PM	#43
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	Sky, Ive got some good news and some bad, The bad news is that I cant make it next weekend bc I gotta work But the good news is that I need new U joints so Im getting an aluminum ds with the good joints So next month I will defintely be there ready to run ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

02-20-2001, 10:51 PM	#44
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Same for me actually, so that turns out fine. The final date is march 24th. I'd like to get everyones current email addresses if the one they have in their registry on here isnt current so we can figure out a way to all meet up on the way down there and caravan. Hopefully I'll get my race seats and stuff in by then. Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, E-303 Cam, Edelbrock Intake, and a whole lot more. 13.2@106mph -Shooting for 12's and a 351 slowly in the works! Stock-94 Integra 15.48@91mph

02-20-2001, 11:59 PM	#45
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	Sky, Email me at dymples797@aol.com. Thats my girls address. Im having probs with mine. Or just send me a personal message here. So far we have about 10 people from here plus all the people were bringing. Its gonna be so big were not even going to get a pass in!lol I hope I can get a set of nittos for this too. I should have an aluminum ds, controll arm set, longtubes, flows and nittos installed by this time next month, maybe I will pull a 12 too (I doubt it) ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

02-21-2001, 01:37 AM	#46
withamc Registered Member Join Date: Aug 2000 Location: Thousand Oaks, CA Posts: 396	SKYMAN - I assume you'll be coming down the 101, so we'll just figure out a way to hook up as you come thru Thousand Oaks. Trade cell phone #'s or something. I'm looking forward to this - never been to a strip before, just stoplights. How much does it cost to race? ------------------ 86 GT, GT40P heads, Crane 2031 installed & waiting on longer pushrods, 1.7 RR's, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), Flowmasters, 3.55s. [This message has been edited by withamc (edited 02-21-2001).]

02-21-2001, 12:17 PM	#47
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	I believe its only ten bucks

02-21-2001, 12:19 PM	#48
ed1371 Registered Member Join Date: Feb 2000 Posts: 469	$12 to get in, $10 to race $22 total for 5 hours at the track Anyone going to be there this weekend too?

02-21-2001, 06:27 PM	#49
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	What at rip off! Pomona was cheaper and better! ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

02-21-2001, 06:50 PM	#50
46stang Registered Member Join Date: May 1999 Location: moorpark ca Posts: 340	yea but pomona was allways packed Shoot i would get to pomona at 6:45am and it would be sold out by 7:00am, when it actually opened, then i wouldnt get to my first race until nearly noon or later. that sucked. I've never been to carlsbad so hopefully it wont be that bad. ------------------ 96 stang,ported 99 heads, 99 intake, 99 cams,Steeda power pullies, 373's, 70mm t/b, gutted maf, bassani x-pipe w/cats, ultraflow catback,iat mod, home depot ram air, k@n. fms spings, tri-ax shifter.

02-22-2001, 12:06 AM	#51
slprlx Registered Member Join Date: Dec 1998 Location: Oakhurst, CA, USA Posts: 116	I didnt get an email skyman... but anyways--> I will be able to come March 24th with a couple buddies from Fresno, CA.. so that should be fun. I need to get in the caravan that is coming from the t.o./camarillo area as well... gimme an email at jlister@usc.edu thanks Jason ------------------ 1992 LX Hatch <ripped uca out of rear... rip> 1988 AOD GT Midnight Blue couple of mods... http://www-scf.usc.edu/~jlister/mustang.htm

02-22-2001, 02:43 AM	#52
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	I emailed everyone from this post. Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, E-303 Cam, Edelbrock Intake, and a whole lot more. 13.2@106mph -Shooting for 12's and a 351 slowly in the works! Stock-94 Integra 15.48@91mph

02-24-2001, 05:18 PM	#53
NO SLO PK Registered Member Join Date: Mar 1999 Location: Arcadia, CA, USA Posts: 731	Sounds like a blast. Unfortunately my 'stang needs a clutch and tranny . Can I bring my Lightning instead??? ------------------ '91 LX Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

02-24-2001, 06:08 PM	#54
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	NO SO POK: Yes! bring your Lightning. I want to run one. I drove one the other day and I loved it. I dont think it was as fast as my stang but I could be wrong since I have heard of a few hitting 13.6's stock. I want to run or just compare timeslips. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

02-24-2001, 07:04 PM	#55
NO SLO PK Registered Member Join Date: Mar 1999 Location: Arcadia, CA, USA Posts: 731	Uh well, my Lightning is a '94 so it isn't going to be turning 13s any time soon. Man how I wished I could get my LX fixed in time (sigh) !! ------------------ '91 LX Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

02-25-2001, 12:33 AM	#56
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Can't get the clutch/tranny in in time or what? Theres 4 weeks left still. Skyler ------------------ -1989 Saleen Mustang #406-TFS Heads, E-303 Cam, Edelbrock Intake, and more. -Videos (MPEG)- 0-110MPH In car view (963k) All Throttle through 3 gears! (497k) Tire Smoking Burnout! (218k)

02-25-2001, 03:12 AM	#57
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	Sky, I just read you E mails, Can I meet you guys a little further down the road? I think Im a little further south than T.O. Will those slicks fit on my car? I have 5lug but my car is lowered a quarter inch in the rear and I will have a set of controll arms on. I think it will still clear though. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors

02-25-2001, 07:12 PM	#59
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	I think the 5lug spacing we have is the same. The rims the tires are on now have horrible back spacing. They stick out like crazy. Thats ok though, cuz it pretty much means they are guaranteed to fit, cuz they stick out instead of in. If your only lowered .25" thats nothing.. Skyler ------------------ -1989 Saleen Mustang #406-TFS Heads, E-303 Cam, Edelbrock Intake, and more. -Videos (MPEG)- 0-110MPH In car view (963k) All Throttle through 3 gears! (497k) Tire Smoking Burnout! (218k)

02-25-2001, 10:34 PM	#60
Patrick Boetticher Registered Member Join Date: Feb 1999 Location: Camarillo/Thousand Oaks Ca Posts: 223	ill be at the Toys R us PArking lot in TO at 9:45 or so with some guys from Camarillo And WITHAMC,and other people from the chat room!!! so far my count from guys from CAmarillo is 4 including me.. ------------------ PPG Torch Red 95GT, Ported Explorer Intake, E-303 cam, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 19# Racing Injectors, AFS 10.5" Cobra R's, Nitto 555's, Eclipse & JL Stereo System... I just sold My K&N, It looks funny with Stock Air Box & filter!!!