About how quick can i run the 1/4?

yelowjaket · 04-25-2003, 01:21 PM

I was just wondering about how quick do you guys think i can run the quarter mile? I tried the analyzer but don't know how accurate that thing is. So just curious what you guys think? All my mods are in my sig. I figure with those mods i'm probably around 240 hp with around 300 lbs./ft torque, flywheel of course. I hoping to go 14.7 err something around there.

blue00gt · 04-25-2003, 03:40 PM

With traction you should be in the 13s with those mods assuming you have a manual. Get some heads and a cam and it will really come alive.

Rev · 04-25-2003, 07:19 PM

What's your race weight? All totalled?

Rev

srv1 · 04-25-2003, 09:35 PM

Depends. How much do you weigh? I get to the 1/8 mile and i am out of breath. Takes me 35 seconds to get there.

yelowjaket · 04-28-2003, 08:11 AM

Quote:

Originally posted by Rev
What's your race weight? All totalled?

Rev

probably around 3300-3400 lbs. without the spare it's probably closer to 3300.

yelowjaket · 04-28-2003, 08:17 AM

Quote:

Originally posted by blue00gt
With traction you should be in the 13s with those mods assuming you have a manual. Get some heads and a cam and it will really come alive.

13's? wow i wasn't thinkin' it would be that fast. Do you mean on slicks when you say "traction"? I'm just going to be running on street tires at least for now.

blue00gt · 04-28-2003, 11:01 AM

I don't think it would take slicks, but you might want to get some drag radials. If you get 2.0 or better 60-fts (which you can do with good street tires with practice) you should be able to hit 13s.

Dark_5.0 · 04-28-2003, 11:08 AM

I am gonna say a 14.3 just cause of where you live.

302 LX Eric · 04-28-2003, 01:11 PM

On street tires, I'm going to guess 14.5.

Good luck,
E

Ackbar00 · 04-28-2003, 03:54 PM

When I had about the same mods, (I had a C&L 73 and stock TB, Underdrives, ceneterforce clutch, longtubes, ported stock intake) I went 13.90's at around 102MPH with 2.0 60ft's. But this was in Ohio too. Just give it hell

Rev · 04-28-2003, 07:28 PM

I'm betting low to mid 14's at best. I doubt you'll see 13's with 240 HP and 3300 lbs.

Rev

bigred90gt · 04-29-2003, 11:38 AM

Quote:

Originally posted by Rev
I'm betting low to mid 14's at best. I doubt you'll see 13's with 240 HP and 3300 lbs.

Rev

I'm with you on this one. I had almost the same setup- cold air, 1 5/8 equal length shorties, flows, and 3.73's, and pullies and I hit 14.7 on street tires. I still have the stock heads, cam and intake though. I installed the rest of whats in my sig, and I am at low 14's with no traction. BTW - my car weighs 3500 with me in it. If I got some slicks, I would expect a dramatic decrease in time. Hopefully that'll be soon!!

Caymon

46stang · 04-30-2003, 06:26 PM

i say 14.5 @ 99mph. but if you wait much longer to go to the track the AZ. heat will probably put you into the 15's

good luck! and let us know how you do!
Leon

04-25-2003, 01:21 PM	#1
yelowjaket Registered Member Join Date: Aug 2002 Location: Phoenix, AZ-USA Posts: 114	About how quick can i run the 1/4? I was just wondering about how quick do you guys think i can run the quarter mile? I tried the analyzer but don't know how accurate that thing is. So just curious what you guys think? All my mods are in my sig. I figure with those mods i'm probably around 240 hp with around 300 lbs./ft torque, flywheel of course. I hoping to go 14.7 err something around there. __________________ 90redGT -Flowmaster mufflers -BBK 2.5" H-Pipe w/cats -BBK equal length shorty headers -K&N -BBK 65mm Throttle Body -Edelbrock performer 5.0 intake -3.73 gears

04-25-2003, 03:40 PM	#2
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	With traction you should be in the 13s with those mods assuming you have a manual. Get some heads and a cam and it will really come alive. __________________ Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s

04-25-2003, 07:19 PM	#3
Rev Registered Member Join Date: Nov 1998 Location: Houston, Tx. Posts: 3,887	Track weight? What's your race weight? All totalled? Rev __________________ '66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe

04-25-2003, 09:35 PM	#4
srv1 Get down..... Join Date: Apr 2001 Location: Room 103 Posts: 2,095	Depends. How much do you weigh? I get to the 1/8 mile and i am out of breath. Takes me 35 seconds to get there. __________________ Cobra brakes are on! Finally..... ------------------------------------------------

04-28-2003, 11:01 AM	#7
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	I don't think it would take slicks, but you might want to get some drag radials. If you get 2.0 or better 60-fts (which you can do with good street tires with practice) you should be able to hit 13s. __________________ Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s

04-28-2003, 11:08 AM	#8
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	I am gonna say a 14.3 just cause of where you live. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

04-28-2003, 01:11 PM	#9
302 LX Eric or '331 LX Eric' Join Date: Jan 1999 Location: Columbus, Ohio Posts: 2,142	On street tires, I'm going to guess 14.5. Good luck, E __________________ 1991 5.0 LX Coupe - 40,750 miles 331 cu. in. / Tremec 3550 / BFG Drag Radials 12.22 @ 114.31 mph - w/1.89 60'

04-28-2003, 03:54 PM	#10
Ackbar00 Rebel Fleet Commander Join Date: Oct 2001 Location: Huber Heights, OH Posts: 1,003	When I had about the same mods, (I had a C&L 73 and stock TB, Underdrives, ceneterforce clutch, longtubes, ported stock intake) I went 13.90's at around 102MPH with 2.0 60ft's. But this was in Ohio too. Just give it hell __________________ 1993 Mustang GT, PTK w/ T-64 - My Cardomain Webpage 11.25@123.5 on only 8 psi. 10.84@121 on only 1 headgasket "The Truth is, Your the Weak, and I am the Tyranny of Evil Men!"

04-28-2003, 07:28 PM	#11
Rev Registered Member Join Date: Nov 1998 Location: Houston, Tx. Posts: 3,887	14's I'm betting low to mid 14's at best. I doubt you'll see 13's with 240 HP and 3300 lbs. Rev __________________ '66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe

04-30-2003, 06:26 PM	#13
46stang Registered Member Join Date: May 1999 Location: moorpark ca Posts: 340	i say 14.5 @ 99mph. but if you wait much longer to go to the track the AZ. heat will probably put you into the 15's good luck! and let us know how you do! Leon __________________ 03 sonic blue cobra coupe, 11.49@122mph bakerfield raceway! 11.67@120mph fontana 98 GT, stock for now.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Advise ASAP Gonna order Hoosier Quick Time Pro's Tommorow	Mustang_GT_90	Windsor Power	1	08-12-2002 06:58 AM
Quick Question about Roll Cage/Race seat compatibility	Fox Body	Windsor Power	4	03-15-2002 01:16 PM
Quick little ricer!	bstang46	Stang Stories	0	11-09-2001 03:40 PM
Quick Fix ? Is There One?	FdMust88	Windsor Power	6	08-04-2001 02:22 PM
Hoosier Quick Time	pro-stang	Windsor Power	0	01-24-2001 11:00 AM