What does it take to beat a new Mach 1

GodStang · 09-26-2003, 10:29 AM

How fast are the new Mach 1's? What does a 2001 Cobra need to beat one. I am about to put 3.73s in mine when I get them out of the Jeep. Otherwise it is bone stock.

Dark_5.0 · 09-26-2003, 11:30 AM

An 01' Cobra and a mach 1 have about a 3-4 tenth gap in stock form.

The mach 1 has a solid axle and 3.55 gears from the factory and makes a few more HP.

As long as you have the IRS the mach 1 will have the straight line advantage,

I would suggest that you get a solid axle with at least 4.30 gears.

3.73's are not steep enough for the 99+ cobras.

I have beat a mach 1 when they first came out since then I lost twice.

They dont really have anymore top end but they make really good low end torque and it is hard to hang with them from a stop.

I think with just long tube headers and exhaust you could walk away from a mach 1. Throw in some gears and you could spank 03 cobras in a straight line as well.

The fastest two DOHC 4.6's where I live are a 99 cobra that runs low 11's on the juice and low 12's on motor.

And a Mach 1 that is turbo charged and ran an 11.7 @117mph with a 1.6 60ft.

On average the mach 1's are running mid 13's. Go to the track and see how you can do. Some cobras are faster than others mine was 3 tenths faster than any of the other 99-01's that were stock were I race.

Fix the wheel hop before you worry about anything else. Trust me.

GodStang · 09-26-2003, 11:37 AM

ya I am doing the wheel hop soon.

I am doing 3.73's just because they are free. Christmas I am puting CAI and FR500 exhaust on it, and by summer hope to have Long tubes and off-road x-pipe, and steeda pullies.

Nitrous Al · 09-27-2003, 09:47 PM

The '03 Mach 1 runs very low 13's. Forget the 3.73, you'll need at least a 4.10 gearset.

GodStang · 09-28-2003, 07:22 PM

I decided that when we get the 3.73s out to go ahead and try and sell them and by 4.10's

blue oval 50h · 10-02-2003, 04:23 PM

At least 4.10's and the widest DR

92ufogt · 10-03-2003, 11:25 AM

4.10's are a great street gear. not too much, but definitly enough.

SaleenGTS · 10-03-2003, 06:48 PM

My buddy has a new one. He has a bassani catback and a chip. He ran 12.90@107.

I raced him in my dad's 92 LX with TFS Heads, Edelbrock Intake, F cam and longtubes with 3.55. Made 293 rwhp.

Dead even. He actually pulled me a little once when I started spinning, but I couldn't pull on him and he couldn't pull on me.

MiracleMax · 10-03-2003, 10:46 PM

I was at Richmond Va tonight and I could have sworn I heard the track announcer say that an auto Mach ran 12.70's at 112 mph????, car looked reasonably stock to me (right down to stock wheels and tires), air temp was about in the 50's though

09-26-2003, 10:29 AM	#1
GodStang College Stanger Join Date: May 1999 Location: Aiken,south carolina, usa Posts: 1,097	What does it take to beat a new Mach 1 How fast are the new Mach 1's? What does a 2001 Cobra need to beat one. I am about to put 3.73s in mine when I get them out of the Jeep. Otherwise it is bone stock. __________________ 2003 Sonic Blue Cobra

09-26-2003, 11:30 AM	#2
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	An 01' Cobra and a mach 1 have about a 3-4 tenth gap in stock form. The mach 1 has a solid axle and 3.55 gears from the factory and makes a few more HP. As long as you have the IRS the mach 1 will have the straight line advantage, I would suggest that you get a solid axle with at least 4.30 gears. 3.73's are not steep enough for the 99+ cobras. I have beat a mach 1 when they first came out since then I lost twice. They dont really have anymore top end but they make really good low end torque and it is hard to hang with them from a stop. I think with just long tube headers and exhaust you could walk away from a mach 1. Throw in some gears and you could spank 03 cobras in a straight line as well. The fastest two DOHC 4.6's where I live are a 99 cobra that runs low 11's on the juice and low 12's on motor. And a Mach 1 that is turbo charged and ran an 11.7 @117mph with a 1.6 60ft. On average the mach 1's are running mid 13's. Go to the track and see how you can do. Some cobras are faster than others mine was 3 tenths faster than any of the other 99-01's that were stock were I race. Fix the wheel hop before you worry about anything else. Trust me. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

09-26-2003, 11:37 AM	#3
GodStang College Stanger Join Date: May 1999 Location: Aiken,south carolina, usa Posts: 1,097	ya I am doing the wheel hop soon. I am doing 3.73's just because they are free. Christmas I am puting CAI and FR500 exhaust on it, and by summer hope to have Long tubes and off-road x-pipe, and steeda pullies. __________________ 2003 Sonic Blue Cobra

09-27-2003, 09:47 PM	#4
Nitrous Al Registered Member Join Date: May 2000 Location: Everett, MA Posts: 417	The '03 Mach 1 runs very low 13's. Forget the 3.73, you'll need at least a 4.10 gearset. __________________ Nitrous Al

09-28-2003, 07:22 PM	#5
GodStang College Stanger Join Date: May 1999 Location: Aiken,south carolina, usa Posts: 1,097	I decided that when we get the 3.73s out to go ahead and try and sell them and by 4.10's __________________ 2003 Sonic Blue Cobra

10-02-2003, 04:23 PM	#6
blue oval 50h Registered Member Join Date: Dec 1998 Location: NJ Posts: 219	At least 4.10's and the widest DR __________________ 347- 10.63@128 N/A

10-03-2003, 11:25 AM	#7
92ufogt Registered Member Join Date: May 2003 Location: Ohio Posts: 19	4.10's are a great street gear. not too much, but definitly enough. __________________ 02 GT Stock 92 GT Carbed 351

10-03-2003, 06:48 PM	#8
SaleenGTS RICE taste like Chicken Join Date: Jun 2000 Location: Edmond, OK Posts: 687	Track Time on Mach 1 My buddy has a new one. He has a bassani catback and a chip. He ran 12.90@107. I raced him in my dad's 92 LX with TFS Heads, Edelbrock Intake, F cam and longtubes with 3.55. Made 293 rwhp. Dead even. He actually pulled me a little once when I started spinning, but I couldn't pull on him and he couldn't pull on me. __________________ Dustin 89 Saleen GT Sport Supercharged 306 Started her up 6/8/03 Old Motor Supercharged 347 516 rwhp 553 rwtq 11.249@126.83 1997 Honda CBR 1100XX Super Blackbird 162 hp

10-03-2003, 10:46 PM	#9
MiracleMax Registered Member Join Date: Apr 1999 Location: Hayes, Va, USA Posts: 798	I was at Richmond Va tonight and I could have sworn I heard the track announcer say that an auto Mach ran 12.70's at 112 mph????, car looked reasonably stock to me (right down to stock wheels and tires), air temp was about in the 50's though __________________ 2002 5M GT (99% stock) 1991 5M LX (30% stock) patiently awaiting my satin silver 07 Mach 1, and don't forget the shaker

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
04 Mach vs 03 Cobra	RBatson	Blue Oval Lounge	20	01-13-2004 09:07 PM
VIN question on 69 Mach 1	DRASTiK	Classic Mustangs	9	10-31-2002 06:06 PM
SportsRoof or Mach 1??? HELP!	6T9PONY	Classic Mustangs	14	10-30-2001 12:36 AM
1969 Mach 1 Options and Data tags HELP ! :-)	Barts_65	Classic Mustangs	3	10-26-2001 12:31 AM