ok Maybe you guys know....

Patrick Boetticher · 06-12-2001, 02:42 PM

i just got my motor running and i was wounder ing the comp ratio... 65cc heads milled down .030 and the block was decked too dunno how much probably the normal... well the stock ration is 9:1 what would mine be allot of guys around here say around 10.5 -11:1 the builder say only 9:1 i think hes on crack!!!!
help....
thanks!!!

------------------
ALL NEW PPG Torch Red 95GT, 304ci block, Forged pistons, Ported Explorer Intake, E-303 cam, fully ported and polished and milled E-7 heads, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, PBR twin piston calipers, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 24# Racing Injectors, AFS 10.5" Cobra R's, Nit

Skyman · 06-12-2001, 03:42 PM

SaleenGTS · 06-12-2001, 04:25 PM

I say 9.5-9.6....I just don't see milling your stock heads adding that much compression. But Sky may be right.

------------------
Dustin
Saleenized 89 GT,428 rwhp,TFS Street Heat Intake,TFS TW Heads,TFS #2 cam,BD-11A 9 psi,FRPP 1.6 rr's,BBK 70mm TB,Pro-M 75mm Bullet,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's

12.3@119

Skyman · 06-13-2001, 12:49 AM

Mines just a guess. I would have said 9.5 or so, but he said the block was decked too.

So I went with a 9.8.

Althought your builder says 9:1. Maybe on the port job they enlarged the combustion chambers, and milled that to compromise?

Sky

------------------
-1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows.
12.55@107mph
50-175 Nitrous Works WET Kit just added.

Kevin Price · 06-13-2001, 08:33 AM

Moved to Windsor Power

------------------
SVO siamesed 351 stroked to 417ci,Yates heads, solid roller,Trans King glide and a little blue bottle
of giggle gas. My Car

06-12-2001, 02:42 PM	#1
Patrick Boetticher Registered Member Join Date: Feb 1999 Location: Camarillo/Thousand Oaks Ca Posts: 223	ok Maybe you guys know.... i just got my motor running and i was wounder ing the comp ratio... 65cc heads milled down .030 and the block was decked too dunno how much probably the normal... well the stock ration is 9:1 what would mine be allot of guys around here say around 10.5 -11:1 the builder say only 9:1 i think hes on crack!!!! help.... thanks!!! ------------------ ALL NEW PPG Torch Red 95GT, 304ci block, Forged pistons, Ported Explorer Intake, E-303 cam, fully ported and polished and milled E-7 heads, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, PBR twin piston calipers, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 24# Racing Injectors, AFS 10.5" Cobra R's, Nit

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SN-92,SN-93,GSS Paxton Ball-Drive Guys Step INSIDE	Mustanguy	Windsor Power	4	02-13-2006 12:13 PM
Edel. non-smog to AFR smog legal heads? What do you guys think?	Simi Stang	Windsor Power	10	06-19-2003 11:14 PM
Let me know what u think guys, kinda long	ex-lt1-guy	Blue Oval Lounge	2	03-04-2002 01:11 PM
dynoed my car guys!	46stang	Blue Oval Lounge	7	09-11-2001 09:08 AM
dynoed my car guys!	46stang	Stang Stories	3	09-08-2001 11:49 AM

06-12-2001, 03:42 PM	#2
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	9.8

06-12-2001, 04:25 PM	#3
SaleenGTS RICE taste like Chicken Join Date: Jun 2000 Location: Edmond, OK Posts: 687	I say 9.5-9.6....I just don't see milling your stock heads adding that much compression. But Sky may be right. ------------------ Dustin Saleenized 89 GT,428 rwhp,TFS Street Heat Intake,TFS TW Heads,TFS #2 cam,BD-11A 9 psi,FRPP 1.6 rr's,BBK 70mm TB,Pro-M 75mm Bullet,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's 12.3@119

06-13-2001, 12:49 AM	#4
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Mines just a guess. I would have said 9.5 or so, but he said the block was decked too. So I went with a 9.8. Althought your builder says 9:1. Maybe on the port job they enlarged the combustion chambers, and milled that to compromise? Sky ------------------ -1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows. 12.55@107mph 50-175 Nitrous Works WET Kit just added.

06-13-2001, 08:33 AM	#5
Kevin Price Registered Member Join Date: Jan 1999 Location: Oxford, KS Posts: 935	Moved to Windsor Power ------------------ SVO siamesed 351 stroked to 417ci,Yates heads, solid roller,Trans King glide and a little blue bottle of giggle gas. My Car