© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
11-21-2002, 05:17 AM | #1 |
Guest
Posts: n/a
|
Clones or Replicas
A seperate thread inspired me to start this since one of my cars is erroneously considered one.
What is the purpose of making your car appear to be what it isn't, such as a "clone" or "replica" of a rare and desireable car? We see this primarily with the RICE crowd. In my opinion, be proud of what you have. Don't fake your ride to be something it isn't, it's insulting to those who worked hard to pay for the real thing (please don't take offense to this for those who may have a fake). In fact, it bugs me to see faked GNX's run around, and I see quite a few. What's the point? If you want a GNX that badly then work for the money to join the exclusive group that own genuine examples. What makes the real cars so desireable is the rarity. In fact, as I type this a couple more examples of what I'm talking about are the Shelby GT-350's and 500's and Shelby Cobras. I'd get ticked if I paid dearly for the real deal and see very good replicas at car shows I attended. It takes away from the mystique of the genuine articles. Fortunately for me, a fake of what I own is tough to make. Ok, enough ranting.....whaddya think? |
11-21-2002, 09:14 AM | #2 |
Registered Member
Join Date: May 2000
Location: Kamloops, BC
Posts: 2,875
|
I voted "OK if it looks good". ONLY because a replica CAN be OK, as long as no one tries to pass it off as an ORIGINAL!!
If I did my 95 up like a 95 Cobra R, I would say, "This is my 95 Cobra R replica, built from a 95 GT". Otherwise it's LAME. There is a very fine line here. |
11-21-2002, 11:45 AM | #3 |
It's a lot like a race car
Join Date: Aug 2000
Location: Meridian, MS
Posts: 4,130
|
Depends....
If you put some Saleen ground effects on your car....fine I don't care But if you put Cobra emblems and body parts on your GT and try to pass it off as a Cobra.....I think it's lame
__________________
1987 Buick T-type 1998 HD Electra Elide |
11-21-2002, 12:35 PM | #4 | |
Registered Member
Join Date: May 2000
Location: Kamloops, BC
Posts: 2,875
|
Quote:
|
|
11-21-2002, 12:46 PM | #5 |
Registered Member
Join Date: Apr 2002
Location: Atlanta, GA
Posts: 2,325
|
I voted for 'as long as it looks good'
This is shaped by the proliferation of fibergalss Deuce's into the hot rodding world, and the FFR Cobras, which have their own race series. Cars like that look good, and no one really tries to pass them off as originals.
__________________
1997 Mustang GT "The Freak" - 13.80 @ 101.70, 2.07 60' 1995 Honda VFR750 - not much @ really fast (actual data pending.) 1964.5 Mustang 289 Rice Haters Club Member #13 |
11-21-2002, 12:50 PM | #6 | |
Registered Member
Join Date: May 2000
Location: Kamloops, BC
Posts: 2,875
|
Quote:
Not with cars like that, but there are a few fake Saleens, and mock Cobras (Mustang) out there |
|
11-21-2002, 01:15 PM | #7 | |
Guest
Posts: n/a
|
Quote:
|
|
11-21-2002, 01:17 PM | #8 |
DURKA DURKA!!
Join Date: Sep 1997
Location: Lubbock, TX...(TX panhandle)
Posts: 1,418
|
Ok as long as it looks good.
I personally happen to like the cobra rear bumper cover and front air damn. I also like the clean side skirts. Have a put a ground effects cobra kit on my GT? No. Would I? Maybe. However, I would not try and pass it off as a real cobra (mine's much faster than a real '93 cobra, anyhow ). I do really like the Shelby Cobra replicars. I would build one if i had the money. It would have an insance engine combo coupled with light weight. Those kind of replicas are alright to me. I do think it's rediculous to swap brands when replicating, however. Like some of those Hondas we've seen wearing Mustang fronts and side vents. That, to me, is just plain rediculous. --nathan
__________________
'91 GT, Coast 347, 9.5:1 compression, full intake, Wolverine 1087 cam, exhaust, Keith Craft ported Windsor Jr. Irons (235 cfm intake, 195 cfm exhaust), AOD, PI 3500 converter, Lentech valve body, 3.73's (4.10's in the works), and Yokohama ES100's out back. Daily Car: '04 Infiniti G35 Sedan 6MT |
11-21-2002, 01:19 PM | #9 |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
I hate fake cobra's, they get raped by the LS-1's and give SVT a bad name. When I got my cobra and started beating some LS-1's they said this is the fastest 96-01 cobra I have ever seen.
Then there friend pulled up in his 98GT with cobra emblems on it. I ask him is that a real cobra he said yeah. Then I smoked him by 11 or so car lengths and exposed the poser for what he is. Lame!! If SVT didnt build it its not a cobra.....
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
11-21-2002, 05:32 PM | #10 |
Registered Member
Join Date: Apr 2002
Location: Baltimore MD
Posts: 47
|
like every one else said as long as you don't try to pass it off as a real one let them have it if they try pull their card
__________________
There are only TWO ways to find out what I'm running Ask me OR race me! |
11-21-2002, 07:06 PM | #11 |
Registered Member
Join Date: Jun 2002
Location: Norman, Oklahoma
Posts: 64
|
Im down with clones as long as they look good and can back up or exceed the performace of the car they are imaitating.
Heh, I think this thread was started when 20Pounds read my racing story and I was talking about my friends Mustang... for the record it doesn't have a fake number on the bumper or anything, just the ground effects and wing... hell its got cobra R's on it too... not much of a clone really
__________________
88' Texas Highway Patrol. 5-Speed Conversion (FINALLY!) 97 Cobra Wheels, 3.73's, 2.5 H-Pipe (no cats), Spintech Pro Street Mufflers, 5 Lug Conversion (Moser 28 spline axles, FMS rotors), Hurst Billet Shifter and a Dirty K@N. 13.7@99.3 |
11-21-2002, 08:59 PM | #12 |
Junior Member
Join Date: Mar 1999
Location: Ventura, California
Posts: 8,981
|
A customer of mine has an original 1969 Camaro SS350 that he is restoring. It is a very nice car, and has all the details and numbers just perfect. His best friend has a stunning 1967 Chevelle SS427. The Camaro is a stock resto, but the Chevelle is mildly built. It has Centerlines on it, but it looks like it came that way. It's a very well done fake. It has all the Super Sport emblems, including 1967 SS427 front and rear badges. It really has a 427 in it, too, but it's still a fake.
He doesn't ever tell anyone that it's real, but when kids drool over it at the gas station, he just lets them think whatever they want. If they were to ask, he'd tell them the truth, but he doesn't have signs on the doors saying "This car is a fake". That would defeat the purpose. he put a lot of time and money into it, and it shows. Which one would I rather have? The Chevelle. The Camaro is worth more, but the Chevelle is a daily driver, if you want it to be, without any concerns. As long as it looks good as a practical package, and you don't try to pass it off as an original, I see nothing wrong with it. If the Chevelle I just told you about was a four door, I would be very much against the idea. Make sense? Take care, ~Chris
__________________
Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local
RED & WHITE! |
11-21-2002, 08:59 PM | #13 |
Registered Member
Join Date: Mar 2002
Location: Indiana
Posts: 26
|
OK as long as it looks good
I say thi because we cant all afford the nice cars and if you don't try to push it off as real thats cool with me I cant afford a shelby but I could build one that looks just as good nothing wrong with that as long as i'm truthful about it
__________________
1970 Mustang Mach 1 351C pushing for 500 HP LOST it in the divorce |
11-21-2002, 09:24 PM | #14 |
Guest
Posts: n/a
|
I can agree with 99% of what's said here and I gather the consensus of opinions indicates it's ok as long as someone doesn't try to pass it off as the "real deal".
That's cool.... |
11-21-2002, 11:28 PM | #15 |
Trisket
Join Date: May 2002
Location: University of Florida, FL Posts: ½
Posts: 1,560
|
if i decided to cover my car with all the saleen parts or cobra parts i would keep my GT badging...honestly i think its badass to see a killer GT...
chevelles rock btw...my dad had a 67 vert, true ss (matching #s)...it was rare, esp in canada...thing had a 396 in it...dont know what he had done to it...but the thing ran 10s n/a....beastly cars...
__________________
University of Florida - Physics Major My 02GT vert Media Center Pics BBK Underdrive Pulleys | K&N FIPK (Gen II) | Bullet Grille | Mach 1 Chin Spoiler | UPR Interior Parts | XM Radio | Audiobahn Subs Ricer Hater's Club Member #1/2 (30) http://www.ricehatersclub.com/ |
11-21-2002, 11:58 PM | #16 |
Registered Member
Join Date: Mar 1999
Location: EDMONTON, Alberta, Canada
Posts: 232
|
Here is a question for you,
My Car is a Candian sold is 1988 Mustang COBRA GT, it is identical to 1988 Mustang GT sold in the states except for the little fact that FORD put a COBRA decal on the rear hatch and called it a "COBRA" (I even have the brochure for the year to prove it), now would my car be considered a clone, or fake if I told you that it was a COBRA, but never deniying the fact that it is just a decal. further more, if I put a 93 Ground FX and decaling on it , and called it a 1988 cobra with 93 Ground FX and decaling would it be a "fake" or just building it to look like I want? just a question(s) I thought I would throw out there?
__________________
-1988 MUSTANG COBRA GT (Canadian...eh!) -1987 Mustang LX coupe (2.3L) -1978 Harley Davidson FLH -2008 Harley Davidson Nightster 1200 -2008 Harley Davidson Night Rod Special -1997 Jaguar XK8 Convertable |
11-22-2002, 01:46 AM | #17 |
Junior Member
Join Date: Mar 1999
Location: Ventura, California
Posts: 8,981
|
Anytime anyone tries to pass off a vehicle as something more than it really is, it's a fake.
Better? lol
__________________
Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local
RED & WHITE! |
11-22-2002, 02:08 AM | #18 | |
Guest
Posts: n/a
|
Quote:
|
|
11-22-2002, 06:23 AM | #19 |
Registered Member
Join Date: May 2000
Location: Kamloops, BC
Posts: 2,875
|
Ya I have to agree. You bought the car as a Cobra from Factory. It's just not an SVT Cobra
|
11-22-2002, 02:56 PM | #20 |
Registered Member
Join Date: Apr 2002
Location: Kingston, Ontario
Posts: 351
|
I don't care if it's a fake or not but what bothers me is when the badging doesn't match the motor. The ground FX and wheels are fine because they look different and look better most of the time but if you are going to put cobra badges on the car it better have a motor similar or better than the cobra. Or like the v-tec stickers that the ricers like. It shouldn't say v-tec or type R unless it actually is.
The only time I think it is fine to not have matching badges to motor is when building a sleeper and the motor is actually bigger than the badges say. I also DON'T think faking numbers on a car as in the saleen's case is cool. For things such as this, only the originals should be that way
__________________
'88 lx, Black on Black, check it out here Spent all my money on school, what a dumb mistake I'm old enough to know better, but still too young to care. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
clones | gt350kr | Classic Mustangs | 1 | 09-27-2002 09:10 PM |
Saleen/Cobra Clones | Dark_5.0 | Blue Oval Lounge | 15 | 07-15-2002 03:50 PM |
Attack of the Clones | The Deuce | Blue Oval Lounge | 20 | 05-17-2002 05:46 PM |
Shelby Clones | MuscleCarFanatic | Classic Mustangs | 4 | 06-19-2001 11:26 AM |