carlsbad...30 june - Page 2

00'BlackSteed · 07-01-2001, 01:29 AM

ED

What kind of times were you running today? I was out there in a Blk Stang with a saleen conv. kit.

------------------
00'GT,(S281 clone),3 chamber flows,K&N filter,BBK underdrive pulleys & 3.73 gears. No time slip as of yet(est.13.7-13.9)

Skyman · 07-01-2001, 01:29 AM

bottle blown racing in camarillo.

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.55@107 Motor

07-01-2001, 11:51 AM

Hey Steed, I saw you out there. It was a nice day, but NO traction.

------------------
Dave & Robin 88 GT, T5
306, polished crank, TRW pistons, underdrive pulleys, cold air induction, 73mm MAF, Xtreme Energy Cam, 3.73's, 1 5/8 unequal length headers, Offroad H-pipe, 2 chamber flowmasters, turn-downs, King Cobra Clutch, Steeda adjustable clutch cable with firewall adjuster

ed1371 · 07-01-2001, 01:00 PM

Of course the "150 shot curse" hit again sat, when I gave the guy the paperwork I was opening my bottle...well he "checks" the mounts and pulls on the bottle. Now I used cheap plywood to mount the brackets to it and because I didn't use washers, the bolts came though the freaking wood! They made me yank the bottle before I could race...I was pissed.

Got 2 dry runs out of the way (14.7/14.8) and said screw it...I snuck the bottle back in.

ran good off the line, but the n20 wasnt kicking in late 2nd through the rest of the run...ran a horrible 14.01 @97
my best on an 80 shot was 13.6@ 107
I looked at my bottle after and because the stupid brackets were pulled, it had layed it flat (its already on a bad angle so being flat didn't help!)

but I had a good time, my parents liked it and I am going back on the 14th to get a FULL DAMN RUN WITH THIS PIG! lol
Thats 3 times something happened...(I made sure my lines were tight this time!)

sorry so long...

Skyman · 07-01-2001, 01:50 PM

Damn Ed, that sucks! What bad luck everytime. How come you only ran an 80 shot though? 106mph is damn good for just an 80 shot. W/ some traction thats deep into the 12's.

I wanted to go so bad... how crowded was it? How was the temp?

Who else was there?

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.55@107 Motor

ed1371 · 07-03-2001, 03:30 AM

I only ran one run with nitrous set at 150...I posted my best run with the 80 shot for comparison to show just how messed up it was that day...

00'BlackSteed · 07-04-2001, 02:42 AM

It was my first time to Carlsbad and traction was a problem. I ran two runs 14.7/14.3 and then I let my friend try one run in my car and he got a 14.2(better driver).I know my car(or I) can do better than that but i'll just take it as a learning experience.

------------------
00'GT,(S281 clone),3 chamber flows,K&N filter,BBK underdrive pulleys & 3.73 gears. No time slip as of yet(est.13.7-13.9)

00'BlackSteed · 07-04-2001, 02:47 AM

Oh by the way, for those of you who were out there saturday, my friend was the one who tried to stage with his rear wheels. It was so funny that we got it on tape.

------------------
00'GT,(S281 clone),3 chamber flows,K&N filter,BBK underdrive pulleys & 3.73 gears. No time slip as of yet(est.13.7-13.9)

ed1371 · 07-04-2001, 03:07 AM

DAMN I MISSED THAT lol...too funny...did we speak briefly blacksteed?
I was a little preoccupied with making sure my parents werent baking in the sun and talking to some marines I know that came out.

00'BlackSteed · 07-05-2001, 02:33 AM

ED

We may have, but by the description of your car, I don't think so. I don't remember talking to anybody with a convert. stang. But next time we all roll out I'll be sure to speak.

------------------
00'GT,(S281 clone),3 chamber flows,K&N filter,BBK underdrive pulleys & 3.73 gears. No time slip as of yet(est.13.7-13.9)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mustang Show Burlington, NC June 12	Ty'97Cobra	Ford Show & Go	1	06-11-2004 03:00 PM
Carlsbad track is a myth!	The Deuce	Stang Stories	6	06-10-2002 05:29 PM
carlsbad june 30th	ed1371	Blue Oval Lounge	1	06-24-2001 10:11 PM
Mustang Club of Central Iowa - Car Show, Swap Meet, Cruise & Autocross - June 2 and 3	KB1991	Blue Oval Lounge	0	05-31-2001 02:06 PM
Mustang Club of Central Iowa - Car Show, Swap Meet, Cruise & Autocross - June 2 and 3	KB1991	Ford Show & Go	0	05-31-2001 02:04 PM

07-01-2001, 01:29 AM	#21
00'BlackSteed Registered Member Join Date: May 2001 Location: Ontario, CA., U.S.A. Posts: 30	ED What kind of times were you running today? I was out there in a Blk Stang with a saleen conv. kit. ------------------ 00'GT,(S281 clone),3 chamber flows,K&N filter,BBK underdrive pulleys & 3.73 gears. No time slip as of yet(est.13.7-13.9)

07-01-2001, 01:29 AM	#22
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	bottle blown racing in camarillo. ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.55@107 Motor

07-01-2001, 11:51 AM	#23
D&R Stang Guest Posts: n/a	Hey Steed, I saw you out there. It was a nice day, but NO traction. ------------------ Dave & Robin 88 GT, T5 306, polished crank, TRW pistons, underdrive pulleys, cold air induction, 73mm MAF, Xtreme Energy Cam, 3.73's, 1 5/8 unequal length headers, Offroad H-pipe, 2 chamber flowmasters, turn-downs, King Cobra Clutch, Steeda adjustable clutch cable with firewall adjuster

07-01-2001, 01:00 PM	#24
ed1371 Registered Member Join Date: Feb 2000 Posts: 469	Of course the "150 shot curse" hit again sat, when I gave the guy the paperwork I was opening my bottle...well he "checks" the mounts and pulls on the bottle. Now I used cheap plywood to mount the brackets to it and because I didn't use washers, the bolts came though the freaking wood! They made me yank the bottle before I could race...I was pissed. Got 2 dry runs out of the way (14.7/14.8) and said screw it...I snuck the bottle back in. ran good off the line, but the n20 wasnt kicking in late 2nd through the rest of the run...ran a horrible 14.01 @97 my best on an 80 shot was 13.6@ 107 I looked at my bottle after and because the stupid brackets were pulled, it had layed it flat (its already on a bad angle so being flat didn't help!) but I had a good time, my parents liked it and I am going back on the 14th to get a FULL DAMN RUN WITH THIS PIG! lol Thats 3 times something happened...(I made sure my lines were tight this time!) sorry so long...

07-01-2001, 01:50 PM	#25
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Damn Ed, that sucks! What bad luck everytime. How come you only ran an 80 shot though? 106mph is damn good for just an 80 shot. W/ some traction thats deep into the 12's. I wanted to go so bad... how crowded was it? How was the temp? Who else was there? Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.55@107 Motor

07-03-2001, 03:30 AM	#26
ed1371 Registered Member Join Date: Feb 2000 Posts: 469	I only ran one run with nitrous set at 150...I posted my best run with the 80 shot for comparison to show just how messed up it was that day...

07-04-2001, 02:42 AM	#27
00'BlackSteed Registered Member Join Date: May 2001 Location: Ontario, CA., U.S.A. Posts: 30	It was my first time to Carlsbad and traction was a problem. I ran two runs 14.7/14.3 and then I let my friend try one run in my car and he got a 14.2(better driver).I know my car(or I) can do better than that but i'll just take it as a learning experience. ------------------ 00'GT,(S281 clone),3 chamber flows,K&N filter,BBK underdrive pulleys & 3.73 gears. No time slip as of yet(est.13.7-13.9)

07-04-2001, 02:47 AM	#28
00'BlackSteed Registered Member Join Date: May 2001 Location: Ontario, CA., U.S.A. Posts: 30	Oh by the way, for those of you who were out there saturday, my friend was the one who tried to stage with his rear wheels. It was so funny that we got it on tape. ------------------ 00'GT,(S281 clone),3 chamber flows,K&N filter,BBK underdrive pulleys & 3.73 gears. No time slip as of yet(est.13.7-13.9)

07-04-2001, 03:07 AM	#29
ed1371 Registered Member Join Date: Feb 2000 Posts: 469	DAMN I MISSED THAT lol...too funny...did we speak briefly blacksteed? I was a little preoccupied with making sure my parents werent baking in the sun and talking to some marines I know that came out.

07-05-2001, 02:33 AM	#30
00'BlackSteed Registered Member Join Date: May 2001 Location: Ontario, CA., U.S.A. Posts: 30	ED We may have, but by the description of your car, I don't think so. I don't remember talking to anybody with a convert. stang. But next time we all roll out I'll be sure to speak. ------------------ 00'GT,(S281 clone),3 chamber flows,K&N filter,BBK underdrive pulleys & 3.73 gears. No time slip as of yet(est.13.7-13.9)