1994 Modded Z28 Vs Modded 5.0 Truck

T5superduty · 10-18-2003, 08:20 PM

Hey since you guys are into street racing like myself I was wondering what your thoughts would be about this race that will prolly go down in a little while. This kid has a 1994 Z28 with new stock short block, LT4 Performance Heads, LT4 Intake, LT4 hot Cam kit "218/228 dur 525/525 " lift, Flomaster cat back Exhaust system, no y pipe or headers yet, and a 6 speed. My set up is a Ford Racing 5.0 Long block, Gt40X Aluminum Heads, B-303 Cam, 1.7 Roller Rockers, edelbrock RPM "air gap" Intake, 625 Road Demon Carb, Hooker Super competition Headers, H-pipe no cats, flo-tech exhaust, 5 Speed. @ 2500 lbs . Any ideas of what the outcome of this race could possibly be ?

lx mike · 10-19-2003, 10:32 AM

what kind of truck do you have thats only 2500 lbs?

what gear and tires for each??

How far of a race?

T5superduty · 10-19-2003, 04:42 PM

Both our cars have the stock gearing, but I am getting 3.55s very soon with a either posi or limited slip diff. Its a 1965 Falcon Ranchero. It prolly weighs like 2700 mabye with me in it.

I think the gearing in the Z28 is like 3.40 or something and I only have a 3.00

lx mike · 10-19-2003, 06:12 PM

Z-28's gearing is either 3.23 or 3.42. Unless either of you have some decent tires think it'll gonna come down to whoever doesn't spin.

jonnyk · 10-19-2003, 08:39 PM

B cams like carbs, so yours probably pulls nice up top. His car will be a monster up top so you better have the jump on him. It should be a good race if yours is truly the weight you say.

T5superduty · 10-19-2003, 10:40 PM

ya thats what I was thinking. I would think it will be too close to call. But either way this kid cant drive for shi.t so I dont know LOL
He had to ask me one time how to burn out. How bad is that

stanger9219 · 10-22-2003, 11:37 PM

id like to hear what the outcaome is so be sure to post it

T5superduty · 10-23-2003, 03:06 AM

I sure will

God I prolly wont beat him cause I think he's getting nitrous lol

10-18-2003, 08:20 PM	#1
T5superduty Registered Member Join Date: Sep 2003 Posts: 114	1994 Modded Z28 Vs Modded 5.0 Truck Hey since you guys are into street racing like myself I was wondering what your thoughts would be about this race that will prolly go down in a little while. This kid has a 1994 Z28 with new stock short block, LT4 Performance Heads, LT4 Intake, LT4 hot Cam kit "218/228 dur 525/525 " lift, Flomaster cat back Exhaust system, no y pipe or headers yet, and a 6 speed. My set up is a Ford Racing 5.0 Long block, Gt40X Aluminum Heads, B-303 Cam, 1.7 Roller Rockers, edelbrock RPM "air gap" Intake, 625 Road Demon Carb, Hooker Super competition Headers, H-pipe no cats, flo-tech exhaust, 5 Speed. @ 2500 lbs . Any ideas of what the outcome of this race could possibly be ?

10-19-2003, 10:32 AM	#2
lx mike Undescribable Join Date: Sep 1998 Location: Ft Myers Fla Posts: 1,539	what kind of truck do you have thats only 2500 lbs? what gear and tires for each?? How far of a race? __________________ Rice Haters Club Member #101

10-19-2003, 06:12 PM	#4
lx mike Undescribable Join Date: Sep 1998 Location: Ft Myers Fla Posts: 1,539	Z-28's gearing is either 3.23 or 3.42. Unless either of you have some decent tires think it'll gonna come down to whoever doesn't spin. __________________ Rice Haters Club Member #101

10-19-2003, 08:39 PM	#5
jonnyk Being stroked is great Join Date: Oct 1998 Location: Alberta, Canada Posts: 772	B cams like carbs, so yours probably pulls nice up top. His car will be a monster up top so you better have the jump on him. It should be a good race if yours is truly the weight you say. __________________ Novi 2000 now spinning off the snout of the 331... Mods Pics

10-22-2003, 11:37 PM	#7
stanger9219 Registered Member Join Date: Sep 2003 Location: st. louis, MO Posts: 197	id like to hear what the outcaome is so be sure to post it __________________ 98 Cobra, CAI, Flowmasters, o/r h-pipe. 4.10s, Hurst shifter.

10-19-2003, 04:42 PM	#3
T5superduty Registered Member Join Date: Sep 2003 Posts: 114	Both our cars have the stock gearing, but I am getting 3.55s very soon with a either posi or limited slip diff. Its a 1965 Falcon Ranchero. It prolly weighs like 2700 mabye with me in it. I think the gearing in the Z28 is like 3.40 or something and I only have a 3.00

10-19-2003, 10:40 PM	#6
T5superduty Registered Member Join Date: Sep 2003 Posts: 114	ya thats what I was thinking. I would think it will be too close to call. But either way this kid cant drive for shi.t so I dont know LOL He had to ask me one time how to burn out. How bad is that

10-23-2003, 03:06 AM	#8
T5superduty Registered Member Join Date: Sep 2003 Posts: 114	I sure will God I prolly wont beat him cause I think he's getting nitrous lol

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Raced an LS-1 Powered Chicken Truck!	Mercury	Stang Stories	26	02-15-2004 11:54 PM
Bought a truck Today.	Coupe Devil	Blue Oval Lounge	16	01-31-2002 05:07 PM
I got my truck! Finally a true Blue Oval family!!!!!	Mike Souslin	Blue Oval Lounge	3	08-10-2001 09:25 PM
Ever seen a Chevy 454 SS Truck?	Rebel79	Stang Stories	10	02-26-2001 11:27 AM
Welcome truck owners!	StangFlyer	Built Ford Tough	8	02-11-2001 01:43 PM