MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Website Community > Stang Stories
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 10-29-2002, 01:06 AM   #1
Skyman
I need 110mph Trap Speed!
 
Skyman's Avatar
 
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
Default Up Coming Race This Weekend.

Well a guy walks into my work the other day, and says, hey, you Skyler? I said yeah, he says, well wanna race? So I go out check out his car.

71 El Camino. This sound sounds reallll good. 400SB, 11:1, World heads, healthy sounding cam, vic jr intake, and a 830 carb, w/ exhaust etc. Got a 3.73 geared LSD rear end and 295 tires.

He wants to race me because he says hes raced all the other fast cars in town but to be the fastest hes gotta be me. So I said sure.

Now I know of a few of the other cars hes raced and I know his car runs real hard, but I dont think I'll have a problem taking it on motor with slicks.

Should I spray him though just for fun? Ill see how much $ he wants to put up, if its worth filling the bottle over.

I was almost thinkin about racin him on street tires, cuz I hate havin to put the slicks on, but I dont wanna loose to him or hed be jumpin through his roof.

I might get surprized and it might run harder than I expect, cuz it sounds reall good, but I dont expect it to hook too well bein an elky.

Skyler
__________________
2001 BMW M3 6spd
12.79@108

RIP
----
1993 Notch w/ 98 4V 4.6 Fasttt...

-1989 Saleen Mustang #406-
12.32@109

-1999 Black Cobra Coupe-
JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.
Skyman is offline   Reply With Quote
Old 10-29-2002, 01:19 AM   #2
Rev
Registered Member
 
Rev's Avatar
 
Join Date: Nov 1998
Location: Houston, Tx.
Posts: 3,887
Default Spray and slicks

If it's for money or if only for prestige, put the spray and slicks on him. Why not just pound his azz just to make sure. He did come into your work area and directly challenge you.

Rev
__________________
'66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi.

O.B.C. #2


'66 coupe
Rev is offline   Reply With Quote
Old 10-29-2002, 08:07 PM   #3
Skyman
I need 110mph Trap Speed!
 
Skyman's Avatar
 
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
Default

Man seems like people arent as interested in real V8 races anymore... anyways, I'll get a good vid of this.

Skyler
__________________
2001 BMW M3 6spd
12.79@108

RIP
----
1993 Notch w/ 98 4V 4.6 Fasttt...

-1989 Saleen Mustang #406-
12.32@109

-1999 Black Cobra Coupe-
JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.
Skyman is offline   Reply With Quote
Old 10-29-2002, 08:53 PM   #4
Conman
Registered Member
 
Conman's Avatar
 
Join Date: Apr 2002
Location: Kingston, Ontario
Posts: 351
Default

he says he wants to be the best
no point in you having to re-race him with the slicks and juice to show him that someone is faster
anything worth doing is worth doing right the first time around.

I'd like to see a video of this one
__________________

'88 lx, Black on Black, check it out here

Spent all my money on school, what a dumb mistake

I'm old enough to know better, but still too young to care.
Conman is offline   Reply With Quote
Old 10-29-2002, 09:23 PM   #5
venumus93
Registered Member
 
venumus93's Avatar
 
Join Date: Jun 2001
Location: West Melbourne, FL, USA
Posts: 237
Default to juice or not to juice....

Sky,

Would be much more interesting race if you did it without the juice....but if he seems like the kind of guy who NEEDS a whoopin', then run with the slicks & juice! I've always liked the side-by-side races at the track, but I don't think you get to many of those in the Saleen...
have fun & post a vid!
Later!

Sean
__________________
93Cobra#3974, 114K miles
3.55's, flo's, pullies, C&L
1/4: 13.985
60': 2.088 (street tires)
MPH: 99.58
venumus93 is offline   Reply With Quote
Old 10-29-2002, 11:12 PM   #6
NotchJohnson
Registered Member
 
NotchJohnson's Avatar
 
Join Date: Oct 2001
Location: Florida Keys
Posts: 593
Default

Definitely get a vid of that bro. Hopefuly youll smoke him so I can rub it in my dads face. He never shuts up about those elkys. Good luck man, John
__________________
89 notch-finally not stock!! ported gt40's, ported cobra intake, 65mm tb, 75mm maf, mac cai, lt's,prochamber, fms 1.6 rr, 125 shot.
NotchJohnson is offline   Reply With Quote
Old 10-30-2002, 02:29 PM   #7
one
Registered Member
 
Join Date: Apr 2002
Location: somewhere outside of nowhere
Posts: 82
Default

hell no use the juice. What if he went out and bought some and didn't tell you, then you loss and he doesn't want to race you again. You loss no rematch and that is that. Use the bottle and if you start to pull him you can always let off the gas alittle so he thinks he is close to beating you. Hey what size stallconverter does he have, will he be running sticky tires? Info you need to know before you think about not filling that bottle.

One

P.S let us know how it goes.
one is offline   Reply With Quote
Old 10-31-2002, 05:31 PM   #8
Nitrous Al
Registered Member
 
Nitrous Al's Avatar
 
Join Date: May 2000
Location: Everett, MA
Posts: 417
Thumbs up

Sky, you have to run this guy heads up with slicks and the bottle. "You're the fastest", so go as fast as possible. If he backs down, he's a wussy! Rip his head off! Good Luck!
Nitrous Al is offline   Reply With Quote
Old 10-31-2002, 06:13 PM   #9
Skyman
I need 110mph Trap Speed!
 
Skyman's Avatar
 
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
Default YOu Got It

Alright Guys you talked me into it.

Im gonna tear him a new *******. :-D .

Skyler
__________________
2001 BMW M3 6spd
12.79@108

RIP
----
1993 Notch w/ 98 4V 4.6 Fasttt...

-1989 Saleen Mustang #406-
12.32@109

-1999 Black Cobra Coupe-
JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.
Skyman is offline   Reply With Quote
Old 10-31-2002, 10:45 PM   #10
MidNiteBlu 5.0
I got something to say
 
MidNiteBlu 5.0's Avatar
 
Join Date: Sep 2001
Location: San Diego, CA
Posts: 1,557
Default

Use the juice. If he bitches about you running the juice you either say "run what ya brung" or you could always just run him again without it.

I dont think el caminos are that great drag cars anyways. but i could be wrong.
__________________
91 LX Hatch 5.0 - made for the twisties
89 LX Hatchback 5.0 5spd. stolen/stripped 4/7/05
http://www.mustangworks.com/cgi-bin/...splay.cgi?3494
1987 Toyota Pickup
Ricer Haters Club Member #33

Want a custom gauge cluster for your Vintage Mustang?
www.jmeenterprises.com
MidNiteBlu 5.0 is offline   Reply With Quote
Old 11-01-2002, 08:47 AM   #11
302 LX Eric
or '331 LX Eric'
 
302 LX Eric's Avatar
 
Join Date: Jan 1999
Location: Columbus, Ohio
Posts: 2,142
Default

When is the race, Sky?

Another vote for slicks and a little go juice.

Tear him a new one and then tell him you're car is running like crap

Good luck.

E
__________________
1991 5.0 LX Coupe - 40,750 miles

331 cu. in. / Tremec 3550 / BFG Drag Radials

12.22 @ 114.31 mph - w/1.89 60'
302 LX Eric is offline   Reply With Quote
Old 11-04-2002, 05:15 PM   #12
one
Registered Member
 
Join Date: Apr 2002
Location: somewhere outside of nowhere
Posts: 82
Default So what happen?

Did you guys race this weekend? What happen?


One
one is offline   Reply With Quote
Old 11-04-2002, 10:51 PM   #13
Green93notch
Registered Member
 
Green93notch's Avatar
 
Join Date: Oct 2002
Location: Poughkeepsie, NY
Posts: 41
Default

deff hold it down for the stangs dude, hey when you got that 12.3 @108 what was ur 60ft and set up? (basicly everything that you had done to ur car when you ran that time) im wonderin cause i could prolly do the same with my trap speed.

Vinny
__________________
1993 5.0 mustang coupe
cobra upper and lower intake, TFS TW Alum. heads, TF 1.6 Roller rockers, TF stage one cam, mac 70 mm T/B, 76 C&L Air meter, FMS 24lb in. steeda pullies, Tremec 3550, FMS 373 gears, FPR, white face gauges, pro 5.0 shifter, 3 chamber flowmasters, Offroad h-pipe, Mac headers, Centerfource cluch, steeda clutch quadrant and cable, saleen wing, walbro 155 fuel pump, Eibach lowering springs 1 7/8", M.U. Sub-frames.
Track Times:
Lebonon Valley:
before heads/cam 13.76 @ 101.74 60ft - 2.24 after but before gears - 13.26 @106.66 with 2.166 60'

EnglishTown before gears - 2.34 60ft - 13.35 @108.12
Etown after - 12.851 @108.19 2.000 60ft
Green93notch is offline   Reply With Quote
Old 11-05-2002, 12:47 AM   #14
Skyman
I need 110mph Trap Speed!
 
Skyman's Avatar
 
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
Default

We are settin it up next saturday at 10pm, it didnt line up this weekend. His car run a Gtech of 13.5@117 on street tires but he was letting off quite early. So its definatly quick!!


I pulled a 1.66 60'. I know I could have got a 12.2 or so out of it though, as that launch was only 5200rpm, I was going to do a 6200rpm launch, but my car had a high rpm ignition problem and I couldnt.

I have 70/30 struts, and Eibach drag launch springs with MT 10x26 slicks.

Skyler
__________________
2001 BMW M3 6spd
12.79@108

RIP
----
1993 Notch w/ 98 4V 4.6 Fasttt...

-1989 Saleen Mustang #406-
12.32@109

-1999 Black Cobra Coupe-
JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.
Skyman is offline   Reply With Quote
Old 11-05-2002, 12:10 PM   #15
Green93notch
Registered Member
 
Green93notch's Avatar
 
Join Date: Oct 2002
Location: Poughkeepsie, NY
Posts: 41
Default

is everything stock in ur rear? or did you upgrade anything.
__________________
1993 5.0 mustang coupe
cobra upper and lower intake, TFS TW Alum. heads, TF 1.6 Roller rockers, TF stage one cam, mac 70 mm T/B, 76 C&L Air meter, FMS 24lb in. steeda pullies, Tremec 3550, FMS 373 gears, FPR, white face gauges, pro 5.0 shifter, 3 chamber flowmasters, Offroad h-pipe, Mac headers, Centerfource cluch, steeda clutch quadrant and cable, saleen wing, walbro 155 fuel pump, Eibach lowering springs 1 7/8", M.U. Sub-frames.
Track Times:
Lebonon Valley:
before heads/cam 13.76 @ 101.74 60ft - 2.24 after but before gears - 13.26 @106.66 with 2.166 60'

EnglishTown before gears - 2.34 60ft - 13.35 @108.12
Etown after - 12.851 @108.19 2.000 60ft
Green93notch is offline   Reply With Quote
Old 11-05-2002, 12:14 PM   #16
one
Registered Member
 
Join Date: Apr 2002
Location: somewhere outside of nowhere
Posts: 82
Default

"His car run a Gtech of 13.5@117 on street tires but he was letting off quite early. So its definatly quick!!"


Hope he doesn't bring sticky tires or know how to launch! Either way get him at the launch and don't miss a gear Bro, do us proud.
one is offline   Reply With Quote
Old 11-06-2002, 08:52 PM   #17
Nitrous Al
Registered Member
 
Nitrous Al's Avatar
 
Join Date: May 2000
Location: Everett, MA
Posts: 417
Thumbs up

Quote:
Originally posted by Skyman
We are settin it up next saturday at 10pm, it didnt line up this weekend. His car run a Gtech of 13.5@117 on street tires but he was letting off quite early. So its definatly quick!!


I pulled a 1.66 60'. I know I could have got a 12.2 or so out of it though, as that launch was only 5200rpm, I was going to do a 6200rpm launch, but my car had a high rpm ignition problem and I couldnt.

I have 70/30 struts, and Eibach drag launch springs with MT 10x26 slicks.

Skyler
Do you know any local speed shops that can help you out with that "high rpm ignition problem"? Have them tune it until you break into the 11's! Good Luck Sky!
Nitrous Al is offline   Reply With Quote
Old 11-06-2002, 10:09 PM   #18
slow98
Registered Member
 
Join Date: Apr 2001
Location: draper,va,us
Posts: 206
Post 117mph

117 mph is pretty high but thats typical of a gtech, put you a jet for a shot in there if u think ur motor can take it and make damn sure..i cant wait to see this vid
__________________
1998 mustang gt/manual..373s,bbk offroad h pipe,flowmaster cat back,c&l 80 mm maf,steeda triax,eibach springs,steeda ud pulleys,upr timing adjuster,screamon demos coil packs,motorsports 9mm plug wires,steea aluminum lca's,steeda heavy duty uca's and just over 100 k on the clock
slow98 is offline   Reply With Quote
Old 11-07-2002, 03:47 AM   #19
Skyman
I need 110mph Trap Speed!
 
Skyman's Avatar
 
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
Default

Oh I got the ignition problem fixed.


Skyler
__________________
2001 BMW M3 6spd
12.79@108

RIP
----
1993 Notch w/ 98 4V 4.6 Fasttt...

-1989 Saleen Mustang #406-
12.32@109

-1999 Black Cobra Coupe-
JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.
Skyman is offline   Reply With Quote
Old 11-07-2002, 08:46 AM   #20
302 LX Eric
or '331 LX Eric'
 
302 LX Eric's Avatar
 
Join Date: Jan 1999
Location: Columbus, Ohio
Posts: 2,142
Default

Quote:
Originally posted by Skyman
Oh I got the ignition problem fixed.


Skyler
Nice. What was the problem?

E
__________________
1991 5.0 LX Coupe - 40,750 miles

331 cu. in. / Tremec 3550 / BFG Drag Radials

12.22 @ 114.31 mph - w/1.89 60'
302 LX Eric is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bullit VS Cobra Race 3/3 Coming today... Skyman Stang Stories 6 03-26-2004 04:27 PM
Who's gonna be at the NMRA race this weekend 90'5.0 Conv Blue Oval Lounge 1 04-03-2002 09:06 PM
supposed to race a 6 spd LS1 this weekend, question about nitto DR'S ricekilla Stang Stories 6 12-17-2001 11:43 PM
Ontario Street Car Assoc. race this weekend! SisuStang Racer's Club House 0 06-21-2001 03:26 PM
ignition problems, please help, races coming up this weekend mussy Classic Mustangs 1 07-23-1999 08:35 AM


All times are GMT -5. The time now is 01:45 PM.


SEARCH