Pics of my custom chromoly 6pt by Bullet Racing!

11Sec_Lx · 05-16-2003, 05:22 PM

The welds are very nice. I requested a taper to the door bars so that they will look somewhat legal (its a street car and it just needs to pass local tech) and make it easy for a fat boy like me to get in and out. These guys were so easy to deal with, I would definitly do business with them again. They also ended up doing some other install work for me and there labor was very reasonable.

Bullet Racing

Let me know what you guys think...

11Sec_Lx · 05-17-2003, 08:03 AM

It is now off to the body shop!!

LayanRubr · 05-18-2003, 02:27 AM

Thats so clean bro, hoping to do that soon. Very good work!

Cait85GT5.0 · 05-18-2003, 05:07 PM

i wish the welds on my cage looked that nice...

your cage looks a hell of a lot easier to get into then mine... i have bruises from getting into and out of mine

Cait

fiveohpatrol · 05-18-2003, 05:54 PM

John, that looks great!

What was the total bill for all that if you dont mind me asking? PM me and let me know if you don't wanna post it.

By the way, I'm gonna have the pictures from WFC up on my website tonight hopefully. I'll shoot ya an email with a link.

It was a blast, especially seeing a street legal car go 8.66!

anyway, sorry to take over your thread. Any idea on when that thing's gonna be back on the street?

take er easy,
Drew

11Sec_Lx · 05-18-2003, 07:22 PM

Drew,

<What was the total bill for all that if you dont mind me asking? PM me and let me know if you don't wanna post it.>

Call me on my cell (before 10:PM). It is 317-403-3397 and I can explain all the details and why it cost what it did.

<<I'll shoot ya an email with a link. >>

I'll be looking for it. Thanks...

<<<It was a blast, especially seeing a street legal car go 8.66!>>>

I bet! I would also have like to see Millen and Lynch running 7.5's and 7.6's in Outlaw.

<<<<Any idea on when that thing's gonna be back on the street?>>>>

It will be very early 2005 in all probability. I am doing it on cash and the cost is a little more than my Dad just paid for his new 2003 Mustang GT. I will say this, its gonna be pretty, comfortable and crazy fast.

Thanks...

05-16-2003, 05:22 PM	#1
11Sec_Lx Registered Member Join Date: Nov 2000 Location: The Staging Lanes Posts: 48	Pics of my custom chromoly 6pt by Bullet Racing! The welds are very nice. I requested a taper to the door bars so that they will look somewhat legal (its a street car and it just needs to pass local tech) and make it easy for a fat boy like me to get in and out. These guys were so easy to deal with, I would definitly do business with them again. They also ended up doing some other install work for me and there labor was very reasonable. Bullet Racing Let me know what you guys think... __________________ 93' Coupe, 428 Windsor, 10.2:1, Converted Super Vic, AFR 225's, FTI Hydro roller, Spec Stage 3+, Viper Spec T-56, 4.30's, Cold A/C, Custom Sound System, PMS, PLX Devices M-500 10.79 @ 125.76 @ 3500lbs (Granny-shifted, on rev limiter last 100') 508 RWHP S.A.E / 471 RWTQ S.A.E 22.79 mpg - Highway 16.0 mpg - Mixed, with a little w.o.t My Pics April 05' - 5.0 Mustang & Super Fords Feature Car December 05' - Ford Builder Feature Car 2005 5.0 Mustang "King of the Street" competitor Last edited by 11Sec_Lx; 05-17-2003 at 07:59 AM..

05-17-2003, 08:03 AM	#2
11Sec_Lx Registered Member Join Date: Nov 2000 Location: The Staging Lanes Posts: 48	It is now off to the body shop!! __________________ 93' Coupe, 428 Windsor, 10.2:1, Converted Super Vic, AFR 225's, FTI Hydro roller, Spec Stage 3+, Viper Spec T-56, 4.30's, Cold A/C, Custom Sound System, PMS, PLX Devices M-500 10.79 @ 125.76 @ 3500lbs (Granny-shifted, on rev limiter last 100') 508 RWHP S.A.E / 471 RWTQ S.A.E 22.79 mpg - Highway 16.0 mpg - Mixed, with a little w.o.t My Pics April 05' - 5.0 Mustang & Super Fords Feature Car December 05' - Ford Builder Feature Car 2005 5.0 Mustang "King of the Street" competitor Last edited by 11Sec_Lx; 05-17-2003 at 10:55 AM..

05-18-2003, 02:27 AM	#3
LayanRubr Registered Member Join Date: Feb 2002 Location: Aggieland, Texas Posts: 297	Thats so clean bro, hoping to do that soon. Very good work! __________________ 87 Mustang 5.0 (308) Notchback - The Blue Baron Rice Hater's Club member #20

05-18-2003, 05:07 PM	#4
Cait85GT5.0 Registered Member Join Date: May 2002 Location: NJ/gettysburg PA Posts: 32	i wish the welds on my cage looked that nice... your cage looks a hell of a lot easier to get into then mine... i have bruises from getting into and out of mine Cait __________________ Pretty in Pink Racing Black 85` GT hot pink 306 block , Rebuilt T-5, 650 Holley Carb, Edelbrock Victor Jr Intake, GT-40 Heads, MAC 1 3/4 headers, X- Pipe, Flowmaster 2 1/2 mufflers, MSD distributor, MSD 6al, MSD blaster 3 coil, , FMS aluminum driveshaft, 8 point cage, 4 inch cowl, 140 amp Power Master Alt. Moroso water pump, autolite gauges, monster tach, hurst short shifter, line lock, underdrive pullies, 3.73s and 8.8 auburn posi rear, 31 spline moser No this is not my boyfriends car and yes the motor is pink Making boys cry 1/4 mile at a time

05-18-2003, 05:54 PM	#5
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	John, that looks great! What was the total bill for all that if you dont mind me asking? PM me and let me know if you don't wanna post it. By the way, I'm gonna have the pictures from WFC up on my website tonight hopefully. I'll shoot ya an email with a link. It was a blast, especially seeing a street legal car go 8.66! anyway, sorry to take over your thread. Any idea on when that thing's gonna be back on the street? take er easy, Drew __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

05-18-2003, 07:22 PM	#6
11Sec_Lx Registered Member Join Date: Nov 2000 Location: The Staging Lanes Posts: 48	Drew, <What was the total bill for all that if you dont mind me asking? PM me and let me know if you don't wanna post it.> Call me on my cell (before 10:PM). It is 317-403-3397 and I can explain all the details and why it cost what it did. <<I'll shoot ya an email with a link. >> I'll be looking for it. Thanks... <<<It was a blast, especially seeing a street legal car go 8.66!>>> I bet! I would also have like to see Millen and Lynch running 7.5's and 7.6's in Outlaw. <<<<Any idea on when that thing's gonna be back on the street?>>>> It will be very early 2005 in all probability. I am doing it on cash and the cost is a little more than my Dad just paid for his new 2003 Mustang GT. I will say this, its gonna be pretty, comfortable and crazy fast. Thanks... __________________ 93' Coupe, 428 Windsor, 10.2:1, Converted Super Vic, AFR 225's, FTI Hydro roller, Spec Stage 3+, Viper Spec T-56, 4.30's, Cold A/C, Custom Sound System, PMS, PLX Devices M-500 10.79 @ 125.76 @ 3500lbs (Granny-shifted, on rev limiter last 100') 508 RWHP S.A.E / 471 RWTQ S.A.E 22.79 mpg - Highway 16.0 mpg - Mixed, with a little w.o.t My Pics April 05' - 5.0 Mustang & Super Fords Feature Car December 05' - Ford Builder Feature Car 2005 5.0 Mustang "King of the Street" competitor

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What is your favorite type of racing?	Fox Body	Racer's Club House	34	06-24-2010 08:56 AM
Mw	cyberstang5.0	Blue Oval Lounge	4	08-22-2003 09:25 PM
CVSR / KCR Meet 2 - BBQ and Race day Pics	rustang girl	Blue Oval Lounge	3	01-03-2003 10:23 AM
q/8 mile racing, $15 bucks as many runs as you want!!!	hillie16	Ford Show & Go	1	09-05-2001 08:39 AM