Intergra GSR vs 2 5.0 Mustangs...

Lizard King · 04-11-2001, 11:03 PM

Look at this post from a local board here...

http://www.contemporarycustoms.com/u...ML/000052.html

------------------
Lizard King, Bone Stock; 13.69 at 101MPH
• Extreme Burnout
•2000GT VS LS1
• Quartermile run
•2000GT vs LX Stang

Mad Horse · 04-11-2001, 11:30 PM

I guess anything is possible. However, I don't like the reply stating a Z34 beat a Stang. No way in Hell.
And as for the statement about the pre 99 Stangs being nothing to worry about

I can promise you I've never lost to a ricer. That is besides the inevitable fly by only after the race is over.

------------------
88GT 5-speed
Mods: Cervinis Ram air hood 3.73 gears, King Cobra clutch, Pro 5.0, March alum. Pullies, DynoMax Cat-back, K&N, 9mm plug wires, PS91 coil, Accel Cap/Rotor, 190lph Fuel pump, 16" Ponies.
"Nip it in the Bud"
My Webpage

Try Me · 04-11-2001, 11:50 PM

Pre-99's being nothing to worry about?
I asked that same guy if he wanted to TRY ME.
He looked at my car, then me, then the car, then says he doesn't feel like racing anymore.

Look forward to my Friday's kill post entitled "Integra GSR get's put to bed"

04-12-2001, 02:26 AM

Did any of you read the other posts on that board? What a bunch of A-holes. They don't support each other or give tech advice. All they do is squabble and tell each other that their goals aren't achievable. That's why i like this board, you actually learn something...jeez

------------------
'84 Mustang 5.0 T5, FMS aluminum radiator & 180* thermostat, 1 5/8 shortys/2.5" duals, '88 GT tail lights and wheels, Holley 4160 4 BBL, smog pump idler, now with hi-po collapsed lifters in #3 or #4

StreetStang37 · 04-12-2001, 03:28 AM

You should go to ClubSi in Si Vs. All, that place is a riot sometimes. I never tell them to come to MustangWorks though cuz I don't want them messing this place up.

------------------
1993 Mustang GT - March Ram Air & Pullies, K&N, C&L 73mm MAF, Super Competition Hooker Headers, 2 1/2 in. mandrel bent cat back, High Flow H-Pipe, Pro 5.0 Shifter, 16* Timing Advance

95mustanggt · 04-12-2001, 08:34 AM

Pre 99 Mustangs nothing to write home about?!?!

Well my pre-99 mustang, which is not exactly very highly modded with only some exhaust mods and a chip, will gladdly have a race with any Z34 or TEG or FAG or whatever you want to call them. Both cars, stock with aftermarket exhaust, anytime anyplace...

Those guys make me laugh.

------------------
Driving: 1998 F-150
Far way in Edmonton==>

1995 Mustang GT

blue00gt · 04-12-2001, 01:33 PM

Those guys are definitely full of sheeit. Unfortunately though, I have been with my friend in his GSR when he beat 2 stangs (late 80s or early 90s 5.0s) in fair races. I'm convinced that one was an auto, and the other got a bad launch, but nonetheless he did beat them by a few cars up to decent speeds.
The only reason those idiots on that board talk so much trash about Stangs is because they know that we have badass cars that they should set as a goal for themselves to beat.

04-12-2001, 04:56 PM

What a bunch of crap. That's some ricer pipe dream if I've ever heard one before. What a joke..........I think somepeople need major reality checks. The only way a GSR w/out major mods (+turbo) is gonna come close to me is if he catches me sleeping and he's the only one who knows the race is on.

------------------
'90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys; Edelbrock Performer Heads;
BBK shorties; MSD 6AL ignition system; Motorsport E303 cam; 75 MAF; 70 TB; Eibach spring kit;
Southside sub-connectors; K&N cone filter charger; Hurst shifter; fiberglass cowl hood; A/C-less;
rear seat-less; cat-less; Flomasters; Corbeau racing seats (fronts); 12.513 @ 108 mph

Lizard King · 04-12-2001, 05:35 PM

I actually believe this guy (GSR), he had over 10 witnesses...

They have this Mikeman posting right now, he is hilarious...

Take a look...
http://www.contemporarycustoms.com/u...ML/000052.html

Ty'97Cobra · 04-12-2001, 05:48 PM

Ahh, I raced a Acura Type-R today. It was lowered and had exhaust. As for stickers, well, he didnt have many. Doesn't that slow them down? lol...

I beat him in the LX. And yes he was racing. Wasn't too much to write about. Wouldn't have mentioned it if it wasn't for this thread....

------------------
1997 Black Cobra Convertible. #2788 of 3088
Mostly Stock - Vortech Anyone?
1988 5.0 LX Convertible -Work Car...Few Mods.

xspeed02 · 04-12-2001, 07:06 PM

I really hate riceboys. Pre 99 Mustangs not being anything to worry about? LMAO, ok. I'll remember that next time I roast all the little "'ludes and 'tegs" again and again. Go add some more stickers boys, I can still see your paint.

------------------
Team Xspeed Leader/Co-Founder
1990 Black Mustang GT 5spd
Current Mods: 2 1/2 Offroad H-Pipe, Borla Cat-Back Exhaust, 91-93 5 Star Pony Wheels, K&N Filter, Free Mods, Pioneer Headunit, MB Quartz Speakers, Orion Xtreme 300 Amp, 2 JL Audio W0's, 130 Amp Alternator, 3.73's
Future Mods: Engine rebuild with Trickflow Heads, GT-40 Intake, Custom Ground Cam, and 14lb ATI Procharger!
AIM=xspeed02

Try Me · 04-13-2001, 10:11 AM

Ok - tonight it's on!
Let's get some bet's!
Integra GSR v. '97GT Vert.
I'll post the results after the race.

04-13-2001, 01:18 PM

Tryme, get off the line quick and I think you'll take it by 1/2 car length. Good luck!

------------------
'90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside sub-connectors; K&N cone filter charger; Hurst shifter; fiberglass cowl hood; A/C-less; rear seat-less; cat-less; Flomasters; Corbeau racing seats (fronts); 30# injectors; 190 lb pump; FPR
12.513 @ 108 mph (pre-inj/fuel pmp/FPR)

04-13-2001, 02:43 PM

hahahah, they said i have a mullet! I don't but yes my car is a white trash POS crap mid eitghtees mustang. I'm a college student with NO money but i could still probably beat 75%+ of those jackasses. I haven't lost to any ricers yet, and i've hung with lightly modded stangs (i choose my races wisely) and surprised a 4 banger supercharged mercedes roadster that TRIED to pass me, the only reason i listed the smog pump idler in my sig is because it's $90 from ford, and it represents, to me, the best part of my smog bypasses. I'm not usually very defensive about my car because it is a pile, but it's what i have, and i'd rather have it that 99% of those fart pipes, *** looking, stickered imports. I love my car.....i'll buy a better car someday, and i admire the work that goes into performance cars (yes, even ricers) but these A-holes don't know me OR my car so they can kiss my @ss. Someday i'll meet them on the street and we'll see whos car is faster, put up or shut up time, if i lose, i'll just work harder if not then my work was worth it. I'm done talking sh/t, and i know they're not, but attacking my character without knowing me, seeing my POS, or even knowing how fast it is or HOW MANY GODDAM HOURS i've worked on it shows how ignorant and closed minded these people are. Whatever.

------------------
'84 Mustang 5.0 T5, FMS aluminum radiator & 180* thermostat, 1 5/8 shortys/2.5" duals, '88 GT tail lights and wheels, Holley 4160 4 BBL, smog pump idler, now with hi-po collapsed lifters in #3 or #4

Try Me · 04-13-2001, 05:26 PM

I like you Stang84LX - i agree with you.
They're calling for scattered showers tonight - hopefully it won't rain. Races start around midnight. I've tried posting on the contempararycustoms site and challenge the Integrra guy, but it takes a few days for my membership to be processed.
.. stay tuned ..

fastang · 04-13-2001, 07:43 PM

If they want to make a generalization about pre 99 stangs being nothing to worry about, I will make one too "I dont think ANY daily driven integra is worth worrying about unless it has some sort of forced induction" Now Im sure theyre gonna tell me about SOME naturaly aspirated teg running 12's or 11's or hell even 10's but REALLY how many are there? especialy daily driven ones.
When I was 16 the GSR was my dream car, I had a non vtec teg and I was sure that if I got the VTEC I could just bolt a few mods and start killing stangs left and right. Well, as soon as I felt 5.0 torque behind my *** , I bought a stang and realized how rediculous ricers really are. Later I went to Pomona and watched a GSR with CAI and full exh run a 15 flat ALL day. A good friend of mine bought a 1.8 LS integra, he put the adjustable cam gears, JG aluminum head and the largest cam possible. He got it dyno tuned by the shop that did all the work and it still only ran low 14.'s.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

04-13-2001, 07:46 PM

I just had to change my sig. to portray what a white trash, mullet loving, hick i am (j/k)

------------------
'84 Mustang 5.0 T5, FMS aluminum radiator & 180* thermostat, 1 5/8 shortys/2.5" duals, '88 GT tail lights and wheels, Holley 4160 4 BBL, smog pump idler, not enough money to spend on hi-po mullet or high revving, torqueless gocart

NO SLO PK · 04-13-2001, 08:11 PM

"NOTHING TO WORRY ABOUT"????

All I say is BRING IT ON!!!!!!

------------------
Russ L
'91 LX
Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

Unit 5302 · 04-13-2001, 11:22 PM

Lizard, if our old Fox's can be beat by these super Integra's your 99 is only a tick away from a loss, dude.

I posted my Gtech time. 14.19, and I was nowhere near track form. My car, with almost no mods and 145k on the clock is at best, a tenth or two behind your new fresh 4.6. I wonder if your 99 would even stand a chance if my motor wasn't getting tired? I'm gonna try to give my car a little tune up this weekend. I'll post my 13's for you.

Try Me · 04-14-2001, 02:37 PM

I met the GSR guy last night, and my buddy challenge him on my behalf - unfortunatly, he still didn't feel like racing?!?!
.. stay tuned ..

04-11-2001, 11:03 PM	#1
Lizard King midnightruns.com Join Date: Dec 2000 Location: Ottawa, Ontario, Canada Posts: 584	Intergra GSR vs 2 5.0 Mustangs... Look at this post from a local board here... http://www.contemporarycustoms.com/u...ML/000052.html ------------------ Lizard King, Bone Stock; 13.69 at 101MPH • Extreme Burnout •2000GT VS LS1 • Quartermile run •2000GT vs LX Stang

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rare Mustangs....Got One?	1969Mach1	Blue Oval Lounge	22	09-25-2010 04:59 AM
Safety Issue 64 - 70 Mustangs	Mach1 Cobra Jet	Classic Mustangs	20	07-11-2005 08:06 PM
Mustangs in snow, almost bit it	Rice Hunter	Blue Oval Lounge	28	12-10-2002 03:29 PM
Overated BOSS Mustangs?	Sac68	Blue Oval Lounge	43	03-01-2001 05:20 PM

04-11-2001, 11:30 PM	#2
Mad Horse Registered Member Join Date: Sep 1998 Location: Dayton, OH., United States Posts: 467	I guess anything is possible. However, I don't like the reply stating a Z34 beat a Stang. No way in Hell. And as for the statement about the pre 99 Stangs being nothing to worry about I can promise you I've never lost to a ricer. That is besides the inevitable fly by only after the race is over. ------------------ 88GT 5-speed Mods: Cervinis Ram air hood 3.73 gears, King Cobra clutch, Pro 5.0, March alum. Pullies, DynoMax Cat-back, K&N, 9mm plug wires, PS91 coil, Accel Cap/Rotor, 190lph Fuel pump, 16" Ponies. "Nip it in the Bud" My Webpage

04-11-2001, 11:50 PM	#3
Try Me Registered Member Join Date: Jul 2000 Location: Ottawa, Ontario, Canada Posts: 465	Pre-99's being nothing to worry about? I asked that same guy if he wanted to TRY ME. He looked at my car, then me, then the car, then says he doesn't feel like racing anymore. Look forward to my Friday's kill post entitled "Integra GSR get's put to bed"

04-12-2001, 02:26 AM	#4
84stangLX Guest Posts: n/a	Did any of you read the other posts on that board? What a bunch of A-holes. They don't support each other or give tech advice. All they do is squabble and tell each other that their goals aren't achievable. That's why i like this board, you actually learn something...jeez ------------------ '84 Mustang 5.0 T5, FMS aluminum radiator & 180* thermostat, 1 5/8 shortys/2.5" duals, '88 GT tail lights and wheels, Holley 4160 4 BBL, smog pump idler, now with hi-po collapsed lifters in #3 or #4

04-12-2001, 03:28 AM	#5
StreetStang37 Registered Member Join Date: Dec 2000 Location: San Jose, California USA Posts: 275	You should go to ClubSi in Si Vs. All, that place is a riot sometimes. I never tell them to come to MustangWorks though cuz I don't want them messing this place up. ------------------ 1993 Mustang GT - March Ram Air & Pullies, K&N, C&L 73mm MAF, Super Competition Hooker Headers, 2 1/2 in. mandrel bent cat back, High Flow H-Pipe, Pro 5.0 Shifter, 16* Timing Advance

04-12-2001, 08:34 AM	#6
95mustanggt Registered Member Join Date: May 2000 Location: Kamloops, BC Posts: 2,875	Pre 99 Mustangs nothing to write home about?!?! Well my pre-99 mustang, which is not exactly very highly modded with only some exhaust mods and a chip, will gladdly have a race with any Z34 or TEG or FAG or whatever you want to call them. Both cars, stock with aftermarket exhaust, anytime anyplace... Those guys make me laugh. ------------------ Driving: 1998 F-150 Far way in Edmonton==> 1995 Mustang GT

04-12-2001, 01:33 PM	#7
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	Those guys are definitely full of sheeit. Unfortunately though, I have been with my friend in his GSR when he beat 2 stangs (late 80s or early 90s 5.0s) in fair races. I'm convinced that one was an auto, and the other got a bad launch, but nonetheless he did beat them by a few cars up to decent speeds. The only reason those idiots on that board talk so much trash about Stangs is because they know that we have badass cars that they should set as a goal for themselves to beat.

04-12-2001, 04:56 PM	#8
1mintlx Guest Posts: n/a	What a bunch of crap. That's some ricer pipe dream if I've ever heard one before. What a joke..........I think somepeople need major reality checks. The only way a GSR w/out major mods (+turbo) is gonna come close to me is if he catches me sleeping and he's the only one who knows the race is on. ------------------ '90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys; Edelbrock Performer Heads; BBK shorties; MSD 6AL ignition system; Motorsport E303 cam; 75 MAF; 70 TB; Eibach spring kit; Southside sub-connectors; K&N cone filter charger; Hurst shifter; fiberglass cowl hood; A/C-less; rear seat-less; cat-less; Flomasters; Corbeau racing seats (fronts); 12.513 @ 108 mph

04-12-2001, 05:35 PM	#9
Lizard King midnightruns.com Join Date: Dec 2000 Location: Ottawa, Ontario, Canada Posts: 584	I actually believe this guy (GSR), he had over 10 witnesses... They have this Mikeman posting right now, he is hilarious... Take a look... http://www.contemporarycustoms.com/u...ML/000052.html

04-12-2001, 05:48 PM	#10
Ty'97Cobra Registered Member Join Date: Apr 1999 Location: NC Posts: 308	Ahh, I raced a Acura Type-R today. It was lowered and had exhaust. As for stickers, well, he didnt have many. Doesn't that slow them down? lol... I beat him in the LX. And yes he was racing. Wasn't too much to write about. Wouldn't have mentioned it if it wasn't for this thread.... ------------------ 1997 Black Cobra Convertible. #2788 of 3088 Mostly Stock - Vortech Anyone? 1988 5.0 LX Convertible -Work Car...Few Mods.

04-12-2001, 07:06 PM	#11
xspeed02 Registered Member Join Date: Nov 1998 Location: Kettering, Ohio Posts: 119	I really hate riceboys. Pre 99 Mustangs not being anything to worry about? LMAO, ok. I'll remember that next time I roast all the little "'ludes and 'tegs" again and again. Go add some more stickers boys, I can still see your paint. ------------------ Team Xspeed Leader/Co-Founder 1990 Black Mustang GT 5spd Current Mods: 2 1/2 Offroad H-Pipe, Borla Cat-Back Exhaust, 91-93 5 Star Pony Wheels, K&N Filter, Free Mods, Pioneer Headunit, MB Quartz Speakers, Orion Xtreme 300 Amp, 2 JL Audio W0's, 130 Amp Alternator, 3.73's Future Mods: Engine rebuild with Trickflow Heads, GT-40 Intake, Custom Ground Cam, and 14lb ATI Procharger! AIM=xspeed02

04-13-2001, 10:11 AM	#12
Try Me Registered Member Join Date: Jul 2000 Location: Ottawa, Ontario, Canada Posts: 465	Ok - tonight it's on! Let's get some bet's! Integra GSR v. '97GT Vert. I'll post the results after the race.

04-13-2001, 01:18 PM	#13
1mintlx Guest Posts: n/a	Tryme, get off the line quick and I think you'll take it by 1/2 car length. Good luck! ------------------ '90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside sub-connectors; K&N cone filter charger; Hurst shifter; fiberglass cowl hood; A/C-less; rear seat-less; cat-less; Flomasters; Corbeau racing seats (fronts); 30# injectors; 190 lb pump; FPR 12.513 @ 108 mph (pre-inj/fuel pmp/FPR)

04-13-2001, 02:43 PM	#14
84stangLX Guest Posts: n/a	hahahah, they said i have a mullet! I don't but yes my car is a white trash POS crap mid eitghtees mustang. I'm a college student with NO money but i could still probably beat 75%+ of those jackasses. I haven't lost to any ricers yet, and i've hung with lightly modded stangs (i choose my races wisely) and surprised a 4 banger supercharged mercedes roadster that TRIED to pass me, the only reason i listed the smog pump idler in my sig is because it's $90 from ford, and it represents, to me, the best part of my smog bypasses. I'm not usually very defensive about my car because it is a pile, but it's what i have, and i'd rather have it that 99% of those fart pipes, *** looking, stickered imports. I love my car.....i'll buy a better car someday, and i admire the work that goes into performance cars (yes, even ricers) but these A-holes don't know me OR my car so they can kiss my @ss. Someday i'll meet them on the street and we'll see whos car is faster, put up or shut up time, if i lose, i'll just work harder if not then my work was worth it. I'm done talking sh/t, and i know they're not, but attacking my character without knowing me, seeing my POS, or even knowing how fast it is or HOW MANY GODDAM HOURS i've worked on it shows how ignorant and closed minded these people are. Whatever. ------------------ '84 Mustang 5.0 T5, FMS aluminum radiator & 180* thermostat, 1 5/8 shortys/2.5" duals, '88 GT tail lights and wheels, Holley 4160 4 BBL, smog pump idler, now with hi-po collapsed lifters in #3 or #4

04-13-2001, 05:26 PM	#15
Try Me Registered Member Join Date: Jul 2000 Location: Ottawa, Ontario, Canada Posts: 465	I like you Stang84LX - i agree with you. They're calling for scattered showers tonight - hopefully it won't rain. Races start around midnight. I've tried posting on the contempararycustoms site and challenge the Integrra guy, but it takes a few days for my membership to be processed. .. stay tuned ..

04-13-2001, 07:43 PM	#16
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	If they want to make a generalization about pre 99 stangs being nothing to worry about, I will make one too "I dont think ANY daily driven integra is worth worrying about unless it has some sort of forced induction" Now Im sure theyre gonna tell me about SOME naturaly aspirated teg running 12's or 11's or hell even 10's but REALLY how many are there? especialy daily driven ones. When I was 16 the GSR was my dream car, I had a non vtec teg and I was sure that if I got the VTEC I could just bolt a few mods and start killing stangs left and right. Well, as soon as I felt 5.0 torque behind my *** , I bought a stang and realized how rediculous ricers really are. Later I went to Pomona and watched a GSR with CAI and full exh run a 15 flat ALL day. A good friend of mine bought a 1.8 LS integra, he put the adjustable cam gears, JG aluminum head and the largest cam possible. He got it dyno tuned by the shop that did all the work and it still only ran low 14.'s. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

04-13-2001, 07:46 PM	#17
84stangLX Guest Posts: n/a	I just had to change my sig. to portray what a white trash, mullet loving, hick i am (j/k) ------------------ '84 Mustang 5.0 T5, FMS aluminum radiator & 180* thermostat, 1 5/8 shortys/2.5" duals, '88 GT tail lights and wheels, Holley 4160 4 BBL, smog pump idler, not enough money to spend on hi-po mullet or high revving, torqueless gocart

04-13-2001, 08:11 PM	#18
NO SLO PK Registered Member Join Date: Mar 1999 Location: Arcadia, CA, USA Posts: 731	"NOTHING TO WORRY ABOUT"???? All I say is BRING IT ON!!!!!! ------------------ Russ L '91 LX Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

04-13-2001, 11:22 PM	#19
Unit 5302 Registered Member Join Date: May 1999 Posts: 5,246	Lizard, if our old Fox's can be beat by these super Integra's your 99 is only a tick away from a loss, dude. I posted my Gtech time. 14.19, and I was nowhere near track form. My car, with almost no mods and 145k on the clock is at best, a tenth or two behind your new fresh 4.6. I wonder if your 99 would even stand a chance if my motor wasn't getting tired? I'm gonna try to give my car a little tune up this weekend. I'll post my 13's for you.

04-14-2001, 02:37 PM	#20
Try Me Registered Member Join Date: Jul 2000 Location: Ottawa, Ontario, Canada Posts: 465	I met the GSR guy last night, and my buddy challenge him on my behalf - unfortunatly, he still didn't feel like racing?!?! .. stay tuned ..