Linear Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
02-11-2001, 01:46 PM
|
#1 |
|
Registered Member
Join Date: Jun 1999
Location: Houston,Tx,Usa
Posts: 12
|
tire size problem
I just got my 15x8 5.5" back spacing weld wheels. I have 275 50 15" drag slicks.They rub against the inner part of the body near the springs. I took out the quads already. Can I put a spacer on or will I have to buy a different size tire and if so what size? I ordered a 1\4" spacer hoping that works with longer shanks for the lugs. Thanks for reply!
|
|
|
|
02-11-2001, 05:47 PM
|
#2 |
|
"Old School Gearhead"
Join Date: Oct 1998
Location: Peru, Illinois
Posts: 617
|
I have the same wheels with 275-50-15 BFG T/A's and they just barely clear the inner wheel wells, but don't rub. They did however rub the tail pipes so I took them off. Just something to check. If you are rubbing on the inside, I'd take a hammer and dolly and push it in a little for clearance. You won't see it and it won't hurt anything. I wouldn't use spacers behind the wheels because anytime you stack parts together, your giving up a certain amout of strength. With slicks you need all the strength and ridgidity you can get. Also it would probably rub on the outside fender lip if you did that anyway. Just my .02, good luck!
------------------ 1985 Mustang GT '85 GT 13.20 @ 105.8 / '72 Mach1 Long list...check website!! My Website |
|
|
|
|
02-11-2001, 08:19 PM
|
#3 |
|
Registered Member
Join Date: Feb 1999
Location: St. Louis,Mo. USA
Posts: 37
|
I have the same wheels and tires. I took a lead hammer and beat the inner wheel back. Like it was said you can not see it.
------------------ Kenne Bell supercharged stang 93LX (the perfect sleeper) Named Wheezer 11.901@117.40 on BFGs/w 1.71 60's |
|
|
|
|
02-11-2001, 08:27 PM
|
#4 |
|
Registered Member
Join Date: Jan 2001
Location: Crossett, Arkansas USA
Posts: 45
|
Bob,
Are your BFG Drag Radials mounted on stock rims. I want to put some on my stock 86 rims, do you think they'll fit? Thanx ------------------ John Welch 86 GT, 3.73's, H-pipe, No smog pump, pulleys, K&N, and still going. |
|
|
|
|
02-12-2001, 06:54 PM
|
#5 |
|
"Old School Gearhead"
Join Date: Oct 1998
Location: Peru, Illinois
Posts: 617
|
Nope, I have BFG T/A's on 15x8 Welds.
------------------ 1985 Mustang GT '85 GT 13.20 @ 105.8 / '72 Mach1 Long list...check website!! My Website |
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Tire size question | 96Saleen | Modular Madness | 6 | 02-09-2004 03:07 PM |
| Tire Size | Rosco | Windsor Power | 4 | 03-25-2002 09:38 PM |
| What size tire will fit? | fordmanck | Windsor Power | 0 | 02-16-2001 08:48 AM |
| TIRE SIZE FOR WINTER | Try Me | Modular Madness | 2 | 11-21-2000 01:24 PM |
| Best Tire size | Stefan | Modular Madness | 4 | 09-11-2000 10:38 PM |