POWER HEADS?need advice

joey50gt · 04-02-2001, 08:58 PM

what do you all think about these heads? they seem to be a really good heads for 600$ complete. From what i have read these heads have really good throttle responce. do they pass emissions cause if not i was looking in to getting some gt40p heads that pass emissions and add about about the same power.
As you can see i dont have a lot of money to spend on a set of $1200 heads. So i want some thing that is good at adding power but cheap at the same time. THANKS FOR ANY HELP OR ADVICE A HEAD OF TIME.

86GT · 04-02-2001, 11:29 PM

If you're not worried about emissions, get the 351 windsor heads they sell, they'll have better flow.

From their website thought, it seems they are E7TE casting heads, which are stock, and emissions legal.

Rick 91GT · 04-03-2001, 07:09 AM

I would try to get a set of iron GT-40's you can find them for decent low prices and they will be a lot better then the Power Heads IMO. In the future you could port/polish the iron GT-40's as well where the Power Heads are at their max already.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!

Kenn · 04-06-2001, 03:35 PM

I read an artical recently were an independent company flowed several heads and the Pro Power heads didnt flow what they claimed. If your looking for a killer head and want a sweet deal, call Gerry at BHP(734)455-1905. He CNC ports E7 heads and gets awsome results. He will sell you a set for $395 with exchange, or $495 outright. Tell him I sent ya and he will give you this deal.

04-02-2001, 08:58 PM	#1
joey50gt Registered Member Join Date: Jan 2001 Location: hurst,texas,america Posts: 95	POWER HEADS?need advice what do you all think about these heads? they seem to be a really good heads for 600$ complete. From what i have read these heads have really good throttle responce. do they pass emissions cause if not i was looking in to getting some gt40p heads that pass emissions and add about about the same power. As you can see i dont have a lot of money to spend on a set of $1200 heads. So i want some thing that is good at adding power but cheap at the same time. THANKS FOR ANY HELP OR ADVICE A HEAD OF TIME.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo vs SC Sounds like good advice	mustardjohn	Small Ponies	0	11-16-2003 05:21 PM
making some changes...need cam advice	Frankenstang65	Classic Mustangs	6	03-01-2003 09:18 AM
Need purchase advice '94 Cobra	Alphanerd	Blue Oval Lounge	3	01-23-2003 03:58 PM
Electrical power, where to splice?	Chris_H	Windsor Power	3	02-11-2001 08:29 PM

04-02-2001, 11:29 PM	#2
86GT Sniffed too much n20 Join Date: Oct 1998 Location: Ont, Canada Posts: 1,018	If you're not worried about emissions, get the 351 windsor heads they sell, they'll have better flow. From their website thought, it seems they are E7TE casting heads, which are stock, and emissions legal.

04-03-2001, 07:09 AM	#3
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	I would try to get a set of iron GT-40's you can find them for decent low prices and they will be a lot better then the Power Heads IMO. In the future you could port/polish the iron GT-40's as well where the Power Heads are at their max already. ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!

04-06-2001, 03:35 PM	#4
Kenn Registered Member Join Date: Nov 1999 Location: Mi Posts: 104	I read an artical recently were an independent company flowed several heads and the Pro Power heads didnt flow what they claimed. If your looking for a killer head and want a sweet deal, call Gerry at BHP(734)455-1905. He CNC ports E7 heads and gets awsome results. He will sell you a set for $395 with exchange, or $495 outright. Tell him I sent ya and he will give you this deal.