spanked the punk kid up the steet

Patrick Boetticher · 09-03-2001, 01:27 AM

Ok theres this punk kid upt here street that got this lihgting (1993) nice truck flows and K&N that i know off.. well every time he drive up MY street he revs the thing yeah sounds good but he dint relize what has been brewing in my garadge the last seven months see sig (nor does he relize every one in my family drives a good ol V-8 FORD (and a chvey too but) so the other night after the local steet races guess who pulls up to me... he asks "ready to race" i reply "why not..." i boged it hard off the line, and i mean hard (damn new clutch) i cought up to him by the end of first pulled hard in second, ground third finally got it in and i beat the F&^$ out of him i had 2 other people in the car too... so needless to say he dont rev any more...

------------------
ALL NEW PPG Torch Red 95GT, 304ci block, Forged pistons, Ported Explorer Intake, E-303 cam, fully ported and polished and milled E-7 heads, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, PBR twin piston calipers, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 24# Racing Injectors, AFS 10.5" Cobra R's, Nit

smokedchevy · 09-03-2001, 02:12 AM

Yeah!! Sounds like a good victory. Maybe you should drive by his house and start throwing revs.

------------------
92 GT, 4:10 gears, centerforce clutch, 6# powerdyne blower, bbk h-pipe, flowmasters

Skyman · 09-03-2001, 03:54 AM

Nice kill! Where are the street races at now? Last I heard they were consistantly busted up and not worth going too.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

46stang · 09-03-2001, 10:13 AM

hey pat whats up with the trans? did you beat the lightning with almost no 3rd gear like the rice car? you animal

yea where are the street races now? down your street? ha ha. looks like your sig. is getting pretty long

You better get that trans fixed though because i don't think you'll beat me with a jacked up 3rd gear. ha ha. I'm ordering some new cams for my car real soon! and my nittos hook real good on the street!
leon
did you want to try and bandaid that trans again? i think your real name is Patrick the BUTCHER. j/k. by the way your car looks awesome

------------------
96 stang,ported 99 heads, 01 bullit intake, 99 cams,Steeda power pullies,Steeda timing adj.,Kirban adj.reg.,Pro-m 87,24#inj.,Twin 57mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,home depot ram air, k@n,
373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter.
best et 13.80
best mph 103.3
bfg street tires,bakersfield, ca

[This message has been edited by 46stang (edited 09-03-2001).]

Patrick Boetticher · 09-03-2001, 10:56 AM

Pat the butcher ehh, no i raced the lightning before the ricer. naw im gettig the new trans theres this place in moorpark that just opend up RPM, there doing it all. soo i dunno know what there gonna rip everything apart see what the heck happned and go form there. he said hes gonna haeve to see it all first then... so i take it on tomarrow(tues) and hopefully he have it done soon... the shop just opned up one of the guys used to work for B&D in canoga park. the streetraces are at DELL TACO again but some times they are at the bowling ally. there pretty big again but there is allot of ricers there but its all good... if the ill be there this weekend w/Cms1994 (chris, silver stang) well see you guys there...

------------------
ALL NEW PPG Torch Red 95GT, 304ci block, Forged pistons, Ported Explorer Intake, E-303 cam, fully ported and polished and milled E-7 heads, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, PBR twin piston calipers, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 24# Racing Injectors, AFS 10.5" Cobra R's, Nit

46stang · 09-03-2001, 05:40 PM

i like messing with you, what are friends for! hope the trans isn't beat up too severe. are you going to be at the street races fri or sat or? and what time? I would still like a ride! later
Leon

Patrick Boetticher · 09-04-2001, 10:50 AM

the races are saturday night at Deltaco off the las posas exit on the 101... last time i got there at 11:30 and there were already tons of people there (ricers) ill be there at about prob 1045 car or not... ill be onb the look out for you guys... ill find out tthe damage today or tomarrow on my car. and definatly youl still get your ride, leon

it not gonna be like your stang, yours was pretty fast!!!

------------------
ALL NEW PPG Torch Red 95GT, 304ci block, Forged pistons, Ported Explorer Intake, E-303 cam, fully ported and polished and milled E-7 heads, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, PBR twin piston calipers, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 24# Racing Injectors, AFS 10.5" Cobra R's, Nit

46stang · 09-05-2001, 12:40 AM

I'm not sure i can make it as thats past my bed time

I'll try though. thanks for the compliment! can't wait for a ride

Skyman · 09-05-2001, 12:52 PM

Hell Yeah! I remember 2 years ago when the races used to be there. Thats when they were their biggest. TONS of cars. Then its just gone downhill since. I will be there next weekend, not this one coming up.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

89cp · 09-05-2001, 11:57 PM

Sat...Del Taco...
I think I'll swing by and take a look.

Patrick Boetticher · 09-10-2001, 12:45 PM

i swung by didnt reconize any one so i took off i was there about 20 nin in a blue 200gt...hope fully next week ill be there in the beast...

fastang · 09-10-2001, 11:30 PM

Glad to hear that you whooped on your cocky neighbor. Hows that beast runnin right now anyway? The combo sounds strong as hell.

Are you going to Carlsbad next Saturday? I will have my car finished tommorow. All I have left to do is slap on the upper intake and tune it up. Did you get yours dyno tuned?

------------------
95GT, TFS T.W. heads, Holley Intake, B303 cam, FRPP 30lb injectors, Scorpion 1.6 rollers, 65mm TB, 73mm MAF, BBK Longtubes, Flowmaster cat back, March Pulleys, MSD coil, 9mm wires, Tremec 3550 trans, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors. 190lph pump, BBK adj FPR.

09-03-2001, 01:27 AM	#1
Patrick Boetticher Registered Member Join Date: Feb 1999 Location: Camarillo/Thousand Oaks Ca Posts: 223	spanked the punk kid up the steet Ok theres this punk kid upt here street that got this lihgting (1993) nice truck flows and K&N that i know off.. well every time he drive up MY street he revs the thing yeah sounds good but he dint relize what has been brewing in my garadge the last seven months see sig (nor does he relize every one in my family drives a good ol V-8 FORD (and a chvey too but) so the other night after the local steet races guess who pulls up to me... he asks "ready to race" i reply "why not..." i boged it hard off the line, and i mean hard (damn new clutch) i cought up to him by the end of first pulled hard in second, ground third finally got it in and i beat the F&^$ out of him i had 2 other people in the car too... so needless to say he dont rev any more... ------------------ ALL NEW PPG Torch Red 95GT, 304ci block, Forged pistons, Ported Explorer Intake, E-303 cam, fully ported and polished and milled E-7 heads, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, PBR twin piston calipers, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 24# Racing Injectors, AFS 10.5" Cobra R's, Nit

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Spanked	GodStang	Stang Stories	16	10-26-2003 02:27 AM
Any Punk rockers in here?!	90LxDroptop	Blue Oval Lounge	2	01-29-2003 08:06 AM
LS1 spanked me bad	bri32zz	Stang Stories	9	09-05-2002 12:00 AM
Spanked by a Shelby glhs	bri32z	Stang Stories	1	09-08-2001 09:22 PM

09-03-2001, 02:12 AM	#2
smokedchevy Registered Member Join Date: Jun 2000 Location: ventura,CA Posts: 438	Yeah!! Sounds like a good victory. Maybe you should drive by his house and start throwing revs. ------------------ 92 GT, 4:10 gears, centerforce clutch, 6# powerdyne blower, bbk h-pipe, flowmasters

09-03-2001, 03:54 AM	#3
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Nice kill! Where are the street races at now? Last I heard they were consistantly busted up and not worth going too. Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor *332RWHP, 350rwtq*

09-03-2001, 10:13 AM	#4
46stang Registered Member Join Date: May 1999 Location: moorpark ca Posts: 340	hey pat whats up with the trans? did you beat the lightning with almost no 3rd gear like the rice car? you animal yea where are the street races now? down your street? ha ha. looks like your sig. is getting pretty long You better get that trans fixed though because i don't think you'll beat me with a jacked up 3rd gear. ha ha. I'm ordering some new cams for my car real soon! and my nittos hook real good on the street! leon did you want to try and bandaid that trans again? i think your real name is Patrick the BUTCHER. j/k. by the way your car looks awesome ------------------ 96 stang,ported 99 heads, 01 bullit intake, 99 cams,Steeda power pullies,Steeda timing adj.,Kirban adj.reg.,Pro-m 87,24#inj.,Twin 57mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,home depot ram air, k@n, 373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter. best et 13.80 best mph 103.3 bfg street tires,bakersfield, ca [This message has been edited by 46stang (edited 09-03-2001).]

09-03-2001, 10:56 AM	#5
Patrick Boetticher Registered Member Join Date: Feb 1999 Location: Camarillo/Thousand Oaks Ca Posts: 223	Pat the butcher ehh, no i raced the lightning before the ricer. naw im gettig the new trans theres this place in moorpark that just opend up RPM, there doing it all. soo i dunno know what there gonna rip everything apart see what the heck happned and go form there. he said hes gonna haeve to see it all first then... so i take it on tomarrow(tues) and hopefully he have it done soon... the shop just opned up one of the guys used to work for B&D in canoga park. the streetraces are at DELL TACO again but some times they are at the bowling ally. there pretty big again but there is allot of ricers there but its all good... if the ill be there this weekend w/Cms1994 (chris, silver stang) well see you guys there... ------------------ ALL NEW PPG Torch Red 95GT, 304ci block, Forged pistons, Ported Explorer Intake, E-303 cam, fully ported and polished and milled E-7 heads, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, PBR twin piston calipers, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 24# Racing Injectors, AFS 10.5" Cobra R's, Nit

09-03-2001, 05:40 PM	#6
46stang Registered Member Join Date: May 1999 Location: moorpark ca Posts: 340	i like messing with you, what are friends for! hope the trans isn't beat up too severe. are you going to be at the street races fri or sat or? and what time? I would still like a ride! later Leon

09-04-2001, 10:50 AM	#7
Patrick Boetticher Registered Member Join Date: Feb 1999 Location: Camarillo/Thousand Oaks Ca Posts: 223	the races are saturday night at Deltaco off the las posas exit on the 101... last time i got there at 11:30 and there were already tons of people there (ricers) ill be there at about prob 1045 car or not... ill be onb the look out for you guys... ill find out tthe damage today or tomarrow on my car. and definatly youl still get your ride, leon it not gonna be like your stang, yours was pretty fast!!! ------------------ ALL NEW PPG Torch Red 95GT, 304ci block, Forged pistons, Ported Explorer Intake, E-303 cam, fully ported and polished and milled E-7 heads, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, PBR twin piston calipers, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 24# Racing Injectors, AFS 10.5" Cobra R's, Nit

09-05-2001, 12:40 AM	#8
46stang Registered Member Join Date: May 1999 Location: moorpark ca Posts: 340	I'm not sure i can make it as thats past my bed time I'll try though. thanks for the compliment! can't wait for a ride

09-05-2001, 12:52 PM	#9
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Hell Yeah! I remember 2 years ago when the races used to be there. Thats when they were their biggest. TONS of cars. Then its just gone downhill since. I will be there next weekend, not this one coming up. Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor *332RWHP, 350rwtq*

09-05-2001, 11:57 PM	#10
89cp Registered Member Join Date: Jan 2001 Location: _ Posts: 35	Sat...Del Taco... I think I'll swing by and take a look.

09-10-2001, 12:45 PM	#11
Patrick Boetticher Registered Member Join Date: Feb 1999 Location: Camarillo/Thousand Oaks Ca Posts: 223	i swung by didnt reconize any one so i took off i was there about 20 nin in a blue 200gt...hope fully next week ill be there in the beast...

09-10-2001, 11:30 PM	#12
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	Glad to hear that you whooped on your cocky neighbor. Hows that beast runnin right now anyway? The combo sounds strong as hell. Are you going to Carlsbad next Saturday? I will have my car finished tommorow. All I have left to do is slap on the upper intake and tune it up. Did you get yours dyno tuned? ------------------ 95GT, TFS T.W. heads, Holley Intake, B303 cam, FRPP 30lb injectors, Scorpion 1.6 rollers, 65mm TB, 73mm MAF, BBK Longtubes, Flowmaster cat back, March Pulleys, MSD coil, 9mm wires, Tremec 3550 trans, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors. 190lph pump, BBK adj FPR.