2FastLX and other photoshop guru's, are you bored?

fiveohpatrol · 01-28-2002, 02:20 PM

if so, then take either one of these 2 pictures and go at it, I'll be getting my hood painted come spring and I was thinking about doing a little creative design on it, Like kinda a silverish color down the sides where the level curves up the hood. I did a really bad job in Paint but you can get an idea of what I'm looking for by it

here's 2 original pictures to play with

thanks guys

fiveohpatrol · 01-29-2002, 06:53 PM

anyone?
heres one from the corral that i really like

Rebel79 · 01-29-2002, 10:59 PM

No clear coat on it though.

fiveohpatrol · 01-29-2002, 11:04 PM

True, but your pretty good in Photoshop arent ya? why dont you work your magic on it

here's one that someone on the corral did in all black, still no clearcoat though

Rebel79 · 01-29-2002, 11:04 PM

Hmm it didn't attach

Rebel79 · 01-29-2002, 11:05 PM

The other...

PKRWUD · 01-30-2002, 12:24 AM

That does it. I've got to figure out how to use Photoshop. I'v had 5.5 for 6 months now, but haven't used it yet. Hmph.

Take care,
-Chris

joe4speed · 01-30-2002, 01:56 AM

Quote:

Originally posted by PKRWUD
That does it. I've got to figure out how to use Photoshop. I'v had 5.5 for 6 months now, but haven't used it yet. Hmph.

Take care,
-Chris

hehehe I've had 6.01 for a while as well, but I've RARELY used it!! Too lazy...

Rebel79 · 01-30-2002, 12:27 PM

Thats a rather difficult job because of the yellow lighting.

Coupe Devil · 01-31-2002, 02:51 PM

Can someone lower my truck and put a set of Cobra R's on it. I know they wont fit but it would be cool t osee what it would look like. If you can go over to the "Bought a Truck Today" thread started by me cause it wont let me post the same picture again.

Thanks if you can do it.
Brad

2FastLX · 02-01-2002, 04:39 AM

Sorry I didn't respond sooner Drew. I haven't been on MW for awhile other than to complain about getting ripped off. Here:

2FastLX · 02-01-2002, 04:47 AM

Oh yeah, to get rid of the yellow lighting Rebel just go to IMAGE>>ADJUST>>HUE/SATURATION. Adjust both hue and saturation until you get a good blend. It works wonders.

2FastLX · 02-01-2002, 05:15 AM

Quote:

Originally posted by pony_power_90
Can someone lower my truck and put a set of Cobra R's on it. I know they wont fit but it would be cool t osee what it would look like. If you can go over to the "Bought a Truck Today" thread started by me cause it wont let me post the same picture again.

Thanks if you can do it.
Brad

Here:

Coupe Devil · 02-01-2002, 07:55 AM

Thanks man. That looks sweet. Now I just gotta find somewhere that makes em to fit my truck.

Brad

Rebel79 · 02-01-2002, 10:56 AM

Quote:

Originally posted by 2FastLX
Oh yeah, to get rid of the yellow lighting Rebel just go to IMAGE>>ADJUST>>HUE/SATURATION. Adjust both hue and saturation until you get a good blend. It works wonders.

Yeah I'm familiar with Photoshop. Hue/Saturation.. how else would you change the color???? Using Color Balance works well when used with Hue/Saturation.

PKRWUD · 02-01-2002, 06:24 PM

2fast-
That is just plain gnarly. Can you build me the perfect woman? I'll send you the specs.

Take care,
-Chris

2FastLX · 02-02-2002, 09:22 PM

Let's see. The perfect woman...
LOL.

01-28-2002, 02:20 PM	#1
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	2FastLX and other photoshop guru's, are you bored? if so, then take either one of these 2 pictures and go at it, I'll be getting my hood painted come spring and I was thinking about doing a little creative design on it, Like kinda a silverish color down the sides where the level curves up the hood. I did a really bad job in Paint but you can get an idea of what I'm looking for by it here's 2 original pictures to play with thanks guys __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

01-29-2002, 10:59 PM	#3
Rebel79 News Editor Join Date: Apr 1999 Location: Concord, CA Posts: 2,101	No clear coat on it though. __________________ Scott Halihan, News Editor The MustangWorks Magazine 1994 Supercharged Mustang Cobra Rebel Racing. Home of Bay Area Mustangs

01-30-2002, 12:24 AM	#7
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	That does it. I've got to figure out how to use Photoshop. I'v had 5.5 for 6 months now, but haven't used it yet. Hmph. Take care, -Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

01-30-2002, 12:27 PM	#9
Rebel79 News Editor Join Date: Apr 1999 Location: Concord, CA Posts: 2,101	Thats a rather difficult job because of the yellow lighting. __________________ Scott Halihan, News Editor The MustangWorks Magazine 1994 Supercharged Mustang Cobra Rebel Racing. Home of Bay Area Mustangs

01-31-2002, 02:51 PM	#10
Coupe Devil Moderator Join Date: Mar 2001 Location: Myrtle Beach SC Posts: 1,643	Can someone lower my truck and put a set of Cobra R's on it. I know they wont fit but it would be cool t osee what it would look like. If you can go over to the "Bought a Truck Today" thread started by me cause it wont let me post the same picture again. Thanks if you can do it. Brad __________________ 1990 GT, 347, TFS TW Heads, TFS Cam, TFS Track heat, Twin turbos, FMIC, T5. Built Ford Tough Moderator

02-01-2002, 04:39 AM	#11
2FastLX The Photoshop Guru Join Date: Feb 2001 Location: Mecca, Indiana Posts: 1,419	Sorry I didn't respond sooner Drew. I haven't been on MW for awhile other than to complain about getting ripped off. Here: __________________ Project: 1988 Coupe - EFI 5.8L Twin Turbo with Victor intake, Canfield heads, F303 cam, March aluminum underdrive pulleys, TKO (or T56 if funds permit), PBR twin piston calipers and 13" rotors up front, 94 Cobra rear calipers and 12" rotors on the rear, 3.73's, Griggs K-member, tubular front control arms, torque arm and panhard bar, polished 99 Cobra wheels. "The GR-40 kit installation is now complete, and the humble Fox-chassis car will now out-corner and out-stop a ZR-1 or a Viper, and support massive horsepower additions with perfect balance." Griggs Racing ICQ# 42269241

02-01-2002, 04:47 AM	#12
2FastLX The Photoshop Guru Join Date: Feb 2001 Location: Mecca, Indiana Posts: 1,419	Oh yeah, to get rid of the yellow lighting Rebel just go to IMAGE>>ADJUST>>HUE/SATURATION. Adjust both hue and saturation until you get a good blend. It works wonders. __________________ Project: 1988 Coupe - EFI 5.8L Twin Turbo with Victor intake, Canfield heads, F303 cam, March aluminum underdrive pulleys, TKO (or T56 if funds permit), PBR twin piston calipers and 13" rotors up front, 94 Cobra rear calipers and 12" rotors on the rear, 3.73's, Griggs K-member, tubular front control arms, torque arm and panhard bar, polished 99 Cobra wheels. "The GR-40 kit installation is now complete, and the humble Fox-chassis car will now out-corner and out-stop a ZR-1 or a Viper, and support massive horsepower additions with perfect balance." Griggs Racing ICQ# 42269241

02-01-2002, 07:55 AM	#14
Coupe Devil Moderator Join Date: Mar 2001 Location: Myrtle Beach SC Posts: 1,643	Thanks man. That looks sweet. Now I just gotta find somewhere that makes em to fit my truck. Brad __________________ 1990 GT, 347, TFS TW Heads, TFS Cam, TFS Track heat, Twin turbos, FMIC, T5. Built Ford Tough Moderator

02-01-2002, 06:24 PM	#16
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	2fast- That is just plain gnarly. Can you build me the perfect woman? I'll send you the specs. Take care, -Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

02-02-2002, 09:22 PM	#17
2FastLX The Photoshop Guru Join Date: Feb 2001 Location: Mecca, Indiana Posts: 1,419	Let's see. The perfect woman... LOL. __________________ Project: 1988 Coupe - EFI 5.8L Twin Turbo with Victor intake, Canfield heads, F303 cam, March aluminum underdrive pulleys, TKO (or T56 if funds permit), PBR twin piston calipers and 13" rotors up front, 94 Cobra rear calipers and 12" rotors on the rear, 3.73's, Griggs K-member, tubular front control arms, torque arm and panhard bar, polished 99 Cobra wheels. "The GR-40 kit installation is now complete, and the humble Fox-chassis car will now out-corner and out-stop a ZR-1 or a Viper, and support massive horsepower additions with perfect balance." Griggs Racing ICQ# 42269241