Computer Help.

Florida Stang · 04-09-2002, 05:05 PM

I need help. My computer is wigging out the fuel pump relay in the computer has went out. The thing is you can not buy the a9L or the AA any more. I have looked every were and have found nothing. What do you do about that? I need all the help I can get..

Mr 5 0 · 04-09-2002, 07:08 PM

Start calling the junk yards, er, I mean, the automotive recycling centers. You'll have to get a used A9L, which is cheaper, anyway. Plenty around.

Florida Stang · 04-09-2002, 08:29 PM

I've called all the junk or automotive yards from florida all the way to north carilona. And found nothing. A buddy told me to send my a9L off and have it rebuilt. Is this a good idea?

Hozer 88GTConv · 04-09-2002, 10:42 PM

I know Racer Walsh (here in Jacksonville) could probably get you a A3M if you want.
It's the computer that comes with MAF conversion kits and is just as flexible as the A9L.

USMC302 · 04-10-2002, 01:00 PM

If your using the 24lb injectors I say get the cobra mass air and the cobra computer. All around it sounds like the best time for an upgrade.

04-09-2002, 05:05 PM	#1
Florida Stang Registered Member Join Date: Feb 2002 Location: Apalachicola, FL. Posts: 30	Computer Help. I need help. My computer is wigging out the fuel pump relay in the computer has went out. The thing is you can not buy the a9L or the AA any more. I have looked every were and have found nothing. What do you do about that? I need all the help I can get.. __________________ 306cid,BBk headers,24# racing inj.,75mm bullet,E-303 cam,keith black 10.5-1 pistons,holly ajust. fuel reg.,msd 6AL,msd billet distributor, trick flow intake with bbk 65mm Tb & EGR, world class HD trans. 4.10 gears and dynomax race mags.

04-09-2002, 07:08 PM	#2
Mr 5 0 Conservative Individualist Join Date: May 1997 Location: Wherever I need to be Posts: 7,487	A9L source found! Start calling the junk yards, er, I mean, the automotive recycling centers. You'll have to get a used A9L, which is cheaper, anyway. Plenty around.

04-09-2002, 08:29 PM	#3
Florida Stang Registered Member Join Date: Feb 2002 Location: Apalachicola, FL. Posts: 30	computer help I've called all the junk or automotive yards from florida all the way to north carilona. And found nothing. A buddy told me to send my a9L off and have it rebuilt. Is this a good idea? __________________ 306cid,BBk headers,24# racing inj.,75mm bullet,E-303 cam,keith black 10.5-1 pistons,holly ajust. fuel reg.,msd 6AL,msd billet distributor, trick flow intake with bbk 65mm Tb & EGR, world class HD trans. 4.10 gears and dynomax race mags.

04-09-2002, 10:42 PM	#4
Hozer 88GTConv Registered Member Join Date: Feb 2002 Location: Jacksonville, FL Posts: 706	A3M... I know Racer Walsh (here in Jacksonville) could probably get you a A3M if you want. It's the computer that comes with MAF conversion kits and is just as flexible as the A9L. __________________ 1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy

04-10-2002, 01:00 PM	#5
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	If your using the 24lb injectors I say get the cobra mass air and the cobra computer. All around it sounds like the best time for an upgrade. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which wiring harness and computer do I have to have?	EazyE-CPT	Windsor Power	0	07-21-2002 11:33 PM
Help with C&L 76MM & A9L computer install	venumus93	Windsor Power	19	05-16-2002 07:58 PM
Computer Issues, Check Engine	98SteedaGT	Modular Madness	1	04-27-2002 05:39 PM
A9L Computer	nextime	Windsor Power	14	03-27-2002 10:36 PM
AAAARGH! Steeda timing adjuster causing computer problems!!!	bark3rd	Modular Madness	1	06-04-2001 08:15 PM