Can I use My Headers & H-pipe for a 94-95 mustang if it was on a fox body?

vetteeatr · 11-11-2002, 06:59 PM

Im pretty sure they have diffrent part numbers but was wondering as i allready have all this.

BBK H-Pipe off road

Thanks

vetteeatr · 11-11-2002, 07:03 PM

lol completely forgot to ask if i can use my T-5 to instead of i think its a T-45 or would this require mods?

bigredstang · 11-12-2002, 10:38 AM

I doubt it. SOme of the differences on the Hpipe is that the air injector tube on the 94-95 comes out on the top of the cats-the 88 comes out under the cats. I believe there are some differences for the air injection system on the headers as well.

Greg

USMC302 · 11-12-2002, 12:51 PM

Not to mention the hangers on the fox body are different from the 94-95's. Also the clutch dust cover on your tranny will interfere with the fox pipe, then again you said you wanted to use the fox tranny though, so maybe that wouldn't be a problem. Good luck

Bluefox91LX · 11-13-2002, 12:40 PM

i use my h-pipe on my fox that came off of a 94 vert auto!

works fine. just hangs a little low, but no biggie.

USMC302 · 11-13-2002, 01:00 PM

Quote:

i use my h-pipe on my fox that came off of a 94 vert auto!

Right, but he is doing vise versa.

11-11-2002, 06:59 PM	#1
vetteeatr Registered Member Join Date: Apr 2001 Location: Olney, Illinois, USA Posts: 212	Can I use My Headers & H-pipe for a 94-95 mustang if it was on a fox body? Im pretty sure they have diffrent part numbers but was wondering as i allready have all this. BBK H-Pipe off road Thanks __________________ !988 GT World Windsor Sr.'s, Harland sharpe rockers, 3.73 gears, pulleys, no ac, hurst shifter, 10:1 pistons, BBK full length headers and H-pipe with flows. Under extensive work for porting and fly cutting to accept my new cam and to match my soon to have systemax intake DROOL Best E.T. 13.20 with edelbrock RPM intake and 70mm TB

11-11-2002, 07:03 PM	#2
vetteeatr Registered Member Join Date: Apr 2001 Location: Olney, Illinois, USA Posts: 212	lol completely forgot to ask if i can use my T-5 to instead of i think its a T-45 or would this require mods? __________________ !988 GT World Windsor Sr.'s, Harland sharpe rockers, 3.73 gears, pulleys, no ac, hurst shifter, 10:1 pistons, BBK full length headers and H-pipe with flows. Under extensive work for porting and fly cutting to accept my new cam and to match my soon to have systemax intake DROOL Best E.T. 13.20 with edelbrock RPM intake and 70mm TB

11-12-2002, 12:51 PM	#4
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Not to mention the hangers on the fox body are different from the 94-95's. Also the clutch dust cover on your tranny will interfere with the fox pipe, then again you said you wanted to use the fox tranny though, so maybe that wouldn't be a problem. Good luck __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Safety Issue 64 - 70 Mustangs	Mach1 Cobra Jet	Classic Mustangs	20	07-11-2005 08:06 PM
H pipe with JBA full length headers	bobtodd	Windsor Power	1	05-30-2002 10:03 AM
t-5, is it the same in the 4 cylinder and V8	ex-lt1-guy	Windsor Power	12	03-03-2002 01:59 AM
1991 4 cylinder 2.3 L mustang exhaust	lever_John	Small Ponies	1	01-19-2002 09:53 PM
Hooker headers for 67-70 mustang 390-428	electrux	Classic Mustangs	0	01-05-2001 05:51 PM

11-12-2002, 10:38 AM	#3
bigredstang Registered Member Join Date: Mar 2000 Location: lincoln, NE Posts: 80	I doubt it. SOme of the differences on the Hpipe is that the air injector tube on the 94-95 comes out on the top of the cats-the 88 comes out under the cats. I believe there are some differences for the air injection system on the headers as well. Greg

11-13-2002, 12:40 PM	#5
Bluefox91LX Registered Member Join Date: Sep 2002 Posts: 70	i use my h-pipe on my fox that came off of a 94 vert auto! works fine. just hangs a little low, but no biggie.