Cheap twin turbo kit
I was talking to a friend of mine and we were discussing coming up with custom turbo kits for different cars. If you could get a relatively cheap kit would their be an interest? There would be kits for the 5.0 and for the 4.6 SOHC motors.
|
If i could get a good price on mine..i'd convert my motor over to a Turbo. Hell all the pro 5.0 boys are using turbo's. Make me a 101mm and i'll talk to ya :)
|
If it is cheap enough then i would buy one. I would rather buy a turbo kit then a nitrous kit.
|
what have you got for a 4.6 sohc gt, let me know , i may have to sell the house, but i can sleep in my car, j/k, i could sell some land though, i have 5 acres but only use 1, the rest i leave to wildlife, oh yeah that's where odie send's me, lol,cya.:D :D :eek:
|
|
Quote:
|
But it won't fit on a 4.6, Marty.
:( Take care, ~Chris |
nobody cares about us DOHC boys.
i still want a tt setup though. |
Quote:
Check THIS out!!! :cool: Take care, ~Chris |
Ok, let me give a little more info....with both kits we are looking at a target price of 3500 bucks for a kit that will give between 350 and 400whp. We are doing testing right now to make sure that everything is working right and that it will be reliable. It is going to be a true twin set-up for now and we have no plans of using a single at this time.
|
Carbureted 302's?
Any plans for carbureted 302's? And what kind of boost #'s and when does it come in?
Rev |
Re: Carbureted 302's?
Quote:
|
Quote:
|
3500 american for a set-up,wow it will be a long time in hell before i can afford that,i would have to save up like 6g's dammmmmmm
|
maybe when I have about 4g's. you will have one for carb. 302's...maybe..hopefully..wishfull thinking maybe.
|
Re: Re: Carbureted 302's?
Quote:
Bradley |
Sounds pretty good, but I don't have the money and you don't make them for my car so it all works out.
Twin Turbo Here's a pic I took of a 5.0L that was twin turbo'd. It was real nice.... I can't remember what times it was running but it was quick. §am. |
As of right now, the mass production of kits are on hold because of a lack of interest...i'll keep you guys posted.
|
Hey PKRWUD. .what you got there exactly. .What is that off of, or where can i get me some of those.. I think I can build my own kit later on if I want to... Just gotta be carbed for know
Next combo is gonna be a EFI 393 so a turbo kit for that might be cool to Hint Hint guys. Bradley |
Quote:
|
Hey Inferno if all your are going to run is 7-9psi. run Twin 13g's that would be more than enough flow and i know they can push that cfm well. or 15g's.
As far as single or Twin....why one or the other...where is my i live both choice?? |
I'm interested, but only as my budget permits. Which means we're probably looking at summer of 2004
|
A couple turbos from a 2.3l Ford will work wonders. You can still find them dirt cheap, and if you are good with a wrench and a welder the rest is almost free. There is tons of junkyard turbo on the web. I am thinking of putting my Novi 1000 on my convertible, and doing a JYTT on my faster car.
|
if theres a waiting list put me on it iwant one
|
so whats going on with the twin turbos for the 5.0's and stuff....just wondering...i just need the manifolds...i have a pair of t3s
|
its turbo
right now i.t.s. turbo in ohio has a tt 5.0 kit for 2895 right now. what is included in your setup. Theres has about everything except fuel management components and ecu adjustement components.
|
Quote:
Daniel. |
run twin T3's off a small dodge turbo car
or run one large .60/.63 off a turbo 2.3L, in low boost forms, it will be plenty or turbo, id say 14-15 psi |
I love naturally aspirated serious hp. Big heads, cams the size of cranks and just as much fuel dripping out of the exhaust as is goin in the intake, which is just a shinny trash can!! But should a reasonably priced turbo set-up for Carbureted 302-351 show its pretty face I'd be tempted to nibble, My motor still isn't in the car but I know there wont be enuf vrooom and I refuse to use juice. As soon as my pony hits the street I know I'll be lookin for another block to start on, and why not a force fed-punched-out-351. If you build it they will come!!:D :D :D
|
youre better off doing a 302 TT as they can hold boost better than 351 blocks can.
they can help you with blow-through carb setups and are highly knowledgable guys. |
Re: Cheap twin turbo kit
What about a Hellion turbo system. Its pretty much bolt-on andy they have system for most mustangs.
|
Re: Cheap twin turbo kit
I know this is probally not where I have to post this but I have a question for all of you I have done alot of research on this and have not found that it can be done for the year of my car and I WANT to do it. I have a V6 2003 Mustang and I want to Twin Turbo it. Now if anyone can help me out with this throw me some ideas I have gone on Fords website and they want to do it for the 2010 but have not be able to do it yet with out blowing the motor. Now there has to be away to do it I think with enough gear heads and enough time we can figure it out. So please help. Thanks for any help with this.
|
Re: Cheap twin turbo kit
y buy urs when i could buy 3 off ebay for the same price
|
Re: Cheap twin turbo kit
Hellion Twin Turbo Systems for you, and sigh, me formerly, DOHC Boys (Dont ask what happened to my DOHC, I still cry...)
|
Re: Cheap twin turbo kit
I was just watching a video trying to promote a synchronic BOV for a turbo system. The pitch is that with this fancy setup you can regain the lost throttle response and un-loaded fuel economy you lose with the turbo/piping clogging up the air intake. That one video sold me on NA power for good.
Turbos are not for this motor head. |
Re: Cheap twin turbo kit
Dear CParkinson,
First, let me tell you I have a lot of years of experience, both in mechanics and in racing, both on the streets, and a few times here and there on tracks. I am perhaps the newbie to this message board, but I am no newbie when it comes to designing, building, and racing fast ford and muscle mustangs (along with my mopar and h-d, of course [I am not a "Ford" Person, I am a Shelby Person, and since he worked for Ford, Dodge, Plymouth, etc. I keep my Fords proudly right along side my Dodges and Plymouths, and those next to my Harleys]). I have done turbo systems, I have done supercharger systems, I have done nitrous on n/a systems, and I have done strictly n/a systems. I can tell you each is different, you drive each differently, each handles different, each has its positives and negatives, and in the end, it all depends on what you want, what kind of driving you are going to be doing, and what is permitted by the rules of the organizations you will be racing under, if you are. This being said, personally, when I had half ownership of Xtreme Auto Sport and Care LLC in Cincinnatti (before the business partner took off with the prototype I put over $65,000 into and my shop manuals, my tools, my everything - even the award plaque that we won for my design implementation on the K20 Killa Kid [so they named the 04 Honda Civic Si Turbo/Nitrous Direct Port/Nitrous Intercooled 646 rwhp/427tq monster that prototype was]) I had built some rather famous vehicles, and was even dubbed by Joe Alvarez of Alvarez Cylinder Head Technologies in the Bay Area of Ca. as "The person who designs and builds what nobody ever thought to". The K20 Killa Kid, for example, had GReddy Profec B Stand along engine management, on out to a RS Wastegate and Blowoff Valve, on out to a T3-4 Hybred Turbo, on out to 3" piping they did not even have the specs for and sent us diagrams for an Acura RSX-X (which by the way does not come CLOSE to the space you have to work with in a civvy hatch of those years), but we had to fabricate, nearly all pieces by hand, that went to the tubing on that turbo system. You go where the money is as a shop owner, and that is what puts your next meal on the table, the next trip to the vet for the familiar (I am sorry but I refuse to call animals 'pets'), the next present for the woman of my life, etc., etc., etc. Where I owned shops, mostly mommy and daddy's boys wanted turbo systems. I learned to design them and build them well, therefore. Personally, I am much more a supercharger person, and I am well known to be a bottle head, and juice, aka the need for speed, person on the tracks. I will NOT, however, use any of that on the streets. Be well bros. Keep the rubber side down. |
All times are GMT -5. The time now is 09:12 AM. |