© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
11-22-2001, 12:28 AM | #1 |
The Photoshop Guru
Join Date: Feb 2001
Location: Mecca, Indiana
Posts: 1,419
|
Buying a TKO. Who has the best deal?
Well, the deal fell through on the 351W equipped Notch, so I'm buying a 351W and building it myself with maybe a 393 stroker kit. I need a good tranny to handle all this torque so I'm going to order a TKO this weekend. Who has the best deals?
Thanks.
__________________
Project: 1988 Coupe - EFI 5.8L Twin Turbo with Victor intake, Canfield heads, F303 cam, March aluminum underdrive pulleys, TKO (or T56 if funds permit), PBR twin piston calipers and 13" rotors up front, 94 Cobra rear calipers and 12" rotors on the rear, 3.73's, Griggs K-member, tubular front control arms, torque arm and panhard bar, polished 99 Cobra wheels. "The GR-40 kit installation is now complete, and the humble Fox-chassis car will now out-corner and out-stop a ZR-1 or a Viper, and support massive horsepower additions with perfect balance." Griggs Racing ICQ# 42269241 |
11-22-2001, 11:26 AM | #2 |
The Photoshop Guru
Join Date: Feb 2001
Location: Mecca, Indiana
Posts: 1,419
|
ttt
__________________
Project: 1988 Coupe - EFI 5.8L Twin Turbo with Victor intake, Canfield heads, F303 cam, March aluminum underdrive pulleys, TKO (or T56 if funds permit), PBR twin piston calipers and 13" rotors up front, 94 Cobra rear calipers and 12" rotors on the rear, 3.73's, Griggs K-member, tubular front control arms, torque arm and panhard bar, polished 99 Cobra wheels. "The GR-40 kit installation is now complete, and the humble Fox-chassis car will now out-corner and out-stop a ZR-1 or a Viper, and support massive horsepower additions with perfect balance." Griggs Racing ICQ# 42269241 |
11-22-2001, 12:19 PM | #3 |
Registered Member
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
|
Look for a place that you can Pick it up so theer will be no shiping on it. D&D http://www.ddperformance.com/driveline.htm $$$1900 for it
__________________
Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe Drive Train: 3.55, T-5 with a Pro 5.0 shifter 12.656@107.71MPH See It at www.T-racing.com/mustang.htm |
11-22-2001, 06:07 PM | #4 |
Registered Member
Join Date: Apr 2000
Location: Collegeville, Pa, USA
Posts: 75
|
I got mine last June from Raceparts 2 for $1200 delivered. Try there, too.
__________________
93 GT Red/Grey B50 8.5:1 block, S trim, 2.95 pulley, 6037 heads, Crane Interceptor 2, Comp XE276HR cam, BBK longtubes, Mac catback, Holley Systemax II intake, Kirban fuel regulator, Accufab 70mm t.b., 80mm Pro-M meter, 36lb. injectors, 1.7 roller rockers, FMS C springs, Factory Five upper and lower control arms, Real Ford Cobra R wheels, 3.73 gears, M2300K cobra 4 wheel disk brakes. 505rwhp/472rwtq with home tune! 2/03 5.0 Mustangs and Super Fords magazine feature car page #166 8/02 MM/FF Feature Car page #102 |
11-22-2001, 06:19 PM | #5 |
The Photoshop Guru
Join Date: Feb 2001
Location: Mecca, Indiana
Posts: 1,419
|
I was going to call them in the morning. They are closed today for Turkey day.
__________________
Project: 1988 Coupe - EFI 5.8L Twin Turbo with Victor intake, Canfield heads, F303 cam, March aluminum underdrive pulleys, TKO (or T56 if funds permit), PBR twin piston calipers and 13" rotors up front, 94 Cobra rear calipers and 12" rotors on the rear, 3.73's, Griggs K-member, tubular front control arms, torque arm and panhard bar, polished 99 Cobra wheels. "The GR-40 kit installation is now complete, and the humble Fox-chassis car will now out-corner and out-stop a ZR-1 or a Viper, and support massive horsepower additions with perfect balance." Griggs Racing ICQ# 42269241 |
11-26-2001, 01:21 PM | #6 |
Moderator
Join Date: Dec 1999
Location: Livonia, MI, USA
Posts: 1,194
|
I bought mine used, but D&D is local to me, and HIGHLY recommend them. You'll be needing extras like speedo gears, and crossmember, and driveshaft, and...
p.s. Contact me privately, if you need a RAM 900 TKO series clutch.
__________________
Darius Rudis, Moderator Corner Carvers Delight 1989 Mustang LX - Open Track Car http://www.dariusrudis.com |
11-26-2001, 03:39 PM | #7 |
gear banger
Join Date: Aug 2000
Location: CHICAGO
Posts: 1,144
|
I ordered mine from Liberty gear. It was the best price that I could find.
__________________
79 Hatch: NA 347, Stage 2 Canfield Heads, Victor JR. Intake, Blueprinted Holley 750 HP, Solid Roller Cam, Shooting for 10's on motor 93 LX: Tremec, dual friction clutch, fms flywheel, Hedman shorties, O/R H-pipe Ricer hater's club member #49 |
11-27-2001, 03:17 AM | #8 |
The Photoshop Guru
Join Date: Feb 2001
Location: Mecca, Indiana
Posts: 1,419
|
How do I contact them Wade?
__________________
Project: 1988 Coupe - EFI 5.8L Twin Turbo with Victor intake, Canfield heads, F303 cam, March aluminum underdrive pulleys, TKO (or T56 if funds permit), PBR twin piston calipers and 13" rotors up front, 94 Cobra rear calipers and 12" rotors on the rear, 3.73's, Griggs K-member, tubular front control arms, torque arm and panhard bar, polished 99 Cobra wheels. "The GR-40 kit installation is now complete, and the humble Fox-chassis car will now out-corner and out-stop a ZR-1 or a Viper, and support massive horsepower additions with perfect balance." Griggs Racing ICQ# 42269241 |
11-27-2001, 05:04 PM | #9 |
or '331 LX Eric'
Join Date: Jan 1999
Location: Columbus, Ohio
Posts: 2,142
|
I purchased my Tremec 3550 from D&D for $1,200. I purchased a couple other items from them too (speedo gear, steel bell, etc.) and they shipped everything within 2 days!
Good people with great prices. E
__________________
1991 5.0 LX Coupe - 40,750 miles 331 cu. in. / Tremec 3550 / BFG Drag Radials 12.22 @ 114.31 mph - w/1.89 60' |
11-29-2001, 10:31 PM | #10 |
Registered Member
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
|
Look at the Link I gave you....
__________________
Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe Drive Train: 3.55, T-5 with a Pro 5.0 shifter 12.656@107.71MPH See It at www.T-racing.com/mustang.htm |
11-30-2001, 01:03 AM | #11 |
The Photoshop Guru
Join Date: Feb 2001
Location: Mecca, Indiana
Posts: 1,419
|
Well, I think I'm going to put off ordering the TKO until maybe mid summer since all the little things the car needs is eating up my savings. Things like the 8.8 Turbo Coupe rear end I picked up for $200. I just couldn't pass up the disc brakes for the rear
Thanks for the help guys. I'll be looking into this more in a month or two.
__________________
Project: 1988 Coupe - EFI 5.8L Twin Turbo with Victor intake, Canfield heads, F303 cam, March aluminum underdrive pulleys, TKO (or T56 if funds permit), PBR twin piston calipers and 13" rotors up front, 94 Cobra rear calipers and 12" rotors on the rear, 3.73's, Griggs K-member, tubular front control arms, torque arm and panhard bar, polished 99 Cobra wheels. "The GR-40 kit installation is now complete, and the humble Fox-chassis car will now out-corner and out-stop a ZR-1 or a Viper, and support massive horsepower additions with perfect balance." Griggs Racing ICQ# 42269241 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
I'm really pissed now! | 82 GT | Blue Oval Lounge | 11 | 09-12-2004 02:53 AM |
Is this a good deal for buying a 'Stang? | silverv6 | Blue Oval Lounge | 13 | 02-05-2002 08:25 PM |
Winter Upgrades??? Check out this deal on tubular a-arms!!! | SD Wheeler | Stang Stories | 3 | 10-15-2001 07:49 AM |
SUPER CHIP DEAL | RubY | Stang Stories | 0 | 01-21-2001 10:32 AM |