carbed twin turbo?

demon666999 · 10-28-2002, 12:06 AM

Ok ok i'm new to the v8 crowed, but i'm lookin into building a 86 stang 5.0 twin turbo. I'll be using two garrett t3's off the old t-bird turbo coupes. But i'm not sure how to hook the charge up to a carbeurator. I now how fuel injected guy doit causeyou can just run it to the throttlebody. But no clue to do it on a carb and not have any pressure leak. Anyone explain or have any pics of a turbo carb setup?

Radon · 10-28-2002, 12:31 AM

Go here.

http://www.toohighpsi.com/BudgetTT/BudgetTT.htm

91GTturbo · 10-28-2002, 07:56 PM

Also check out www.turbomustangs.com. Don't know much about the carbed/turbo combinations, but we have a couple guys running them with some impressive numbers.

Skyman · 10-29-2002, 12:52 AM

you need a blow thru carb and theres boxs that go around the carb to hold the pressure.

Also the turbo coupes didnt have T3's they had an IHI turbo. I have a freshly rebuilt IHI with no miles if u want it.

The difference is the IHI will spool a lot quicker but wont support as much HP as the T3. The T3 is good for about 320 and the IHI about 260. But an IHI will see boost as early as 1800rpm!

Skyler

10-28-2002, 12:06 AM	#1
demon666999 Registered Member Join Date: Oct 2002 Location: Detroit, MI Posts: 19	carbed twin turbo? Ok ok i'm new to the v8 crowed, but i'm lookin into building a 86 stang 5.0 twin turbo. I'll be using two garrett t3's off the old t-bird turbo coupes. But i'm not sure how to hook the charge up to a carbeurator. I now how fuel injected guy doit causeyou can just run it to the throttlebody. But no clue to do it on a carb and not have any pressure leak. Anyone explain or have any pics of a turbo carb setup?

10-28-2002, 12:31 AM	#2
Radon Registered Member Join Date: Sep 2000 Location: Calgary, Alberta, Canada Posts: 68	Go here. http://www.toohighpsi.com/BudgetTT/BudgetTT.htm __________________ '87 Performance Red Notch Carb'd 306 w/ nitrous

10-28-2002, 07:56 PM	#3
91GTturbo Registered Member Join Date: May 2001 Location: Valdese, NC Posts: 361	Also check out www.turbomustangs.com. Don't know much about the carbed/turbo combinations, but we have a couple guys running them with some impressive numbers. __________________ 91 single turbo vert

10-29-2002, 12:52 AM	#4
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	you need a blow thru carb and theres boxs that go around the carb to hold the pressure. Also the turbo coupes didnt have T3's they had an IHI turbo. I have a freshly rebuilt IHI with no miles if u want it. The difference is the IHI will spool a lot quicker but wont support as much HP as the T3. The T3 is good for about 320 and the IHI about 260. But an IHI will see boost as early as 1800rpm! Skyler __________________ 2001 BMW M3 6spd 12.79@108 RIP ---- 1993 Notch w/ 98 4V 4.6 Fasttt... -1989 Saleen Mustang #406- 12.32@109 -1999 Black Cobra Coupe- JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mad scientist backyard twin turbo carbed smallblock	blue00gt	Blue Oval Lounge	6	04-21-2003 06:02 PM
Anyone Drove A Twin Turbo 5.0???	BowTie Eater 5 Liter	Blue Oval Lounge	9	02-06-2002 07:12 AM
Speed Innovations Twin Turbo Kit Questions???	BowTie Eater 5 Liter	Windsor Power	1	07-17-2001 11:07 PM
How Much HP With Incon Twin Turbo On A Stock Mustang	BowTie Eater 5 Liter	Windsor Power	9	05-10-2001 07:24 PM
MSD Boost Timing Master. A Good Thing To Use With A Twin Turbo?	BowTie Eater 5 Liter	Windsor Power	7	01-21-2001 06:57 PM