|
Classic Ricer Pic and story!!!!
My Friends, I give you...THE DUMBEST RICER ON EARTH! This picture is real - not doctored in anyway - and was taken last by a Transportation Supervisor for a company that delivers building materials for 84 Lumber. When he saw it in the parking lot of IHOP, he went and bought a camera to take pictures. Notice the Ricer style rims and tires, the wing was probably crushed by the load. http://members.mustangworks.com/95mu...s/dumb_ass.jpg The car is still running, as can be witnessed by the exhaust. A woman is either asleep or otherwise out in the front seat passenger side. The guy driving it was jogging up and down on Rt. 925. (in the background) Witnesses said their physical state was OTHER than normal. The driver finally came back after the police were called, and was found crouched behind the rear of the car, attempting to cut the twine around the load! Luckily, the police stopped him and had the load removed. The materials were loaded at Home Depot. Their store manager said they had the customer sign a waiver. While the plywood and 2X4s are fairly obvious, what you can’t see is the back seat, which contains -- are you ready for this? -- 10 bags of concrete @ 80 lbs. each. They estimated the load weight at 3000 lbs. Both back tires exploded, the wheels bent and the back shocks were driven through the floorboard. The car, with FL plates (naturally), was headed for Annapolis, where the couple presumably planned to build a new house in which to smoke their crack. Apparently this was another case were an import driver believed that his car was something it is not... http://www.mustangworks.com/interact...rd/biggrin.gif ------------------ White 1995 Mustang GT Dynomax Cat-Back, Offroad H-pipe, K&N Filters w/o Air Silencer My 1995 Mustang GT http://members.mustangworks.com/95mu...must-white.jpg |
Come on man. That pic has been around for at least 8 months, and it changes every time I see it. The last one had tinted windows. And look at this one, the door molding doesn't even up, as though the front end was cut and pasted.
Still a funny pic though. ------------------ 1997 Cobra (Black on black), C+L 80mm MAF, K+N filter, Pro 5.0 shifter, BBK Springs, Taylor Wires, 2 Chamber Flows, ASP Pulleys, BBK off road H pipe. |
NO serious this is real! I saw this myself! With like 4000 lbs of material the guy actually drove away from the hardware store http://www.mustangworks.com/interact...board/wink.gif
j/k...I know, but it is funny as hell though... |
That's funny as hell, even if it's a fake. I'm gonna DL the pic and take it to work http://www.mustangworks.com/interact...rd/biggrin.gif
|
I saw that same pic w/ a similar explanation on a import site. Same pic as in not modified. Has it been around? Yes. Story untrue? I doubt it.
|
I still don't believe it. Thqt is so doctored. Funny any how. Light Em Up!! http://www.mustangworks.com/interact...oard/smile.gif
|
Hey 95mustanggt, do you want my old ADS chip? It worked great when my engine was stock, and it says in the instructions that you have to remove the cats to use this particular chip, which you have already done. I had to ditch it when I did the motor work and Im never going to use it again. If you want it let me know. If it works well and you like it send me a $20. If not just throw it away and don't worry about the $. Oh I just ordered longtubes w the shortie H pipe with cats and a flowmaster cat-back, so if you know anyone that wants my old off road H pipe let me know.
------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors |
Fastang, i would want your o-r h-pipe, although it probaly doesnt fit a fox body.
Man is that a jetta? i know if i worked as the forklift loader, or whatever, i wouldnt load that wood, that could kill someone. ------------------ 90 lx coupe: Mac cold air fenderwell, accel supercoil,advncd ignition,3-core radiatr, FMS alum D/S, Black magic fan, 3.27grs, 3chbr flows. Best time: 14.20(on 225/60/15 firehawks) Best mph 97.80 Best 60' 2.1 next mods: subframes, 3.73's |
Quote:
Cam ------------------ White 1995 Mustang GT Dynomax Cat-Back, Offroad H-pipe, K&N Filters w/o Air Silencer My 1995 Mustang GT http://members.mustangworks.com/95mu...must-white.jpg |
This is my cpu at work and I dont like sending or recieving E-mails on it. Email me at my girls house at dymples@aol.com. I think thats how it works. She is on AOL and her screenname is DYMPLES. E-mail me your address and I will ups it to you. I usualy get to ups stuff for free through my job. (although I cant abuse it) I dont know if UPS will deliver from here to Canada without some extra charge, or if they will do it at all. I will find out, just get me your adress, or any adress you want it mailed to. It claims that with the off road pipes the chip can knock off three fourths of a second! Thats a lot and I realy think it did because I was keeping up with most and beating a few LT1's when all I had was the k&n, H pipe and chip. LT1's typicaly run 14.2 which is about 3/4 of a sec faster than a stock 5.0. Good luck.
------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors |
fastang, I keep getting my mail returned to me. I'll send you a personal message. Let me know here if you get it.
|
Even fake, that is funny as heck!
------------------ Dan McClain, Editor The Mustang Works Magazine 1991 Mustang GT - NOVI Supercharged 377 Stroker 1999 Ford Lightning SVT - 2000 Prototype updated by Roush |
Ok, if you are having problems mailing to my girls site then email me at work at saihparts@earthlink.net. I am on this cpu a lot more anyway.
------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, weld in subframe connectors |
Can someone please tell my how to make those quotes show up on your post. Just like 95mustanggt did when he replied about my chip.
|
Quote:
[This message has been edited by JL1314 (edited 01-24-2001).] |
fastang, all you have to do is click on the reply with quote button instead of the reply button. You can also use UBB Code.
Just like this: http://members.mustangworks.com/95mu...mages/help.jpg |
Quote:
------------------ White 1995 Mustang GT Dynomax Cat-Back, Offroad H-pipe, K&N Filters w/o Air Silencer My 1995 Mustang GT http://members.mustangworks.com/95mu...must-white.jpg |
Ok, How do you get to your private messages on this board? I know its a dumb question but I have never had to do it before, and I cant find the reply with quote option anywhere. If you arent worried about some idiots getting your adress then post it here. I havent got to check my girls cpu yet to see if it went through there. I will probably check it tonight.
|
I don't think that it will be on your girls pc because the message came back to me as undeliverable. He's how to check your private messages:
1. click on the inbox link above windsor power: http://members.mustangworks.com/95mu...images/pm1.jpg 2. Enter your username and password.. http://members.mustangworks.com/95mu...images/pm2.jpg Try this the next time that you log on. If you have any troubles, I'll just post my address in this thread. |
95mustanggt:
What program are you using for your screen scans? Just curious. Joe |
| All times are GMT -5. The time now is 09:34 AM. |