MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Modular Madness
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 10-16-2003, 11:20 AM   #1
SleeperGT
Registered Member
 
Join Date: Sep 2002
Location: Ponte Vedra Beach, FL
Posts: 122
Default Stingy Dyno?

Looking for some input on two dyno experiences, on two different dyno's. After I had the base Vortech kit installed on my car I had it dyno on I believe was a DynoJet and I had it at the track. Car dyno'd at 313 rwhp and the car ran a 105 mph quarter mile at about 13.5 (street tires and very bad 60' time). This hp # matched practically spot on with the Analyzer. Since then I have done upgrades which have led to better track #'s. The odd thing is my most recent upgrade was a Dyno Tune, 90 mm MAS and 42 pound injectors. This was done on a Mustang Dyno and the numbers were dramatically lower than I expected. Car dyno'ed at 323 wrhp, 327 rwtrq. Just a tiny bit over the stock Vortech install (and much lower torque #). However I took the car to the track and it ran about what I expected with the upgrades, 12.7@110 mph. I was told that the Mustang Dyno typically generates more conservative #'s. When I plug my #'s into the analyzer I come up with 400 hp (car has a track weight of 3825 with my big behind in it). Has anyone experienced something like this before or any comments on a Mustang Dyno?

1. "Stock" Vortech: 105 mph@13.5, DynoJet at 313 rwhp, 369 rwtrq.

2. Diablo Custom Chip & PowerPipe: 108 mph@13.0, no dyno #'s.

3. Dyno tune, 90 mm MAS & 42 pound injectors: 110 mph@12.7, Mustang Dyno 323 rwhp, 327 rwtrq
Attached Images
File Type: jpg dyno100503.jpg (65.4 KB, 19 views)
__________________
'00 GT
5-spd
Vortech S-Trim
3.1" Pulley
Paxton Air-to-Air Aftercooler
90 mm MAS
42 lb injectors
Cobra Fuel Pump
70 mm AccuFab Throttlebody
C & L Intake Plenum
2 1/2" X-pipes
Anderson PowerPipe
MagnaFlow Mufflers
Diablo Custom Chip
3.73's
Steeda Lower Control Arms
358 rwhp (Mustang Dyno)

New Track Times Coming Soon
SleeperGT is offline   Reply With Quote
Old 10-16-2003, 10:46 PM   #2
explicitone
Registered Member
 
explicitone's Avatar
 
Join Date: Apr 2002
Location: racine ,wi
Posts: 691
Default

mustang dynos are better for tuning and they give more of a real world ##S and dynojets give a higher number but all in all you r is making the same power on the dyno..

I would not worry about how much your car makes on the dyno but more what it runs at the track and just us the dyno for tuning

dyno #S are not important unless your racing the dyno or just need something to brag about
__________________
RUN IT STAIGHT AND RUN IT HARD


________



Novi 2000
60' 1.46
1/4 10.67
mph 126.5
_________
explicitone is offline   Reply With Quote
Old 10-17-2003, 09:45 PM   #3
SleeperGT
Registered Member
 
Join Date: Sep 2002
Location: Ponte Vedra Beach, FL
Posts: 122
Talking

Thanks explicitone. You validated what I was told at the shop. But I do have to confess I would have liked the little sheet of paper with the pretty chart on it to have had larger numbers to brag about .
__________________
'00 GT
5-spd
Vortech S-Trim
3.1" Pulley
Paxton Air-to-Air Aftercooler
90 mm MAS
42 lb injectors
Cobra Fuel Pump
70 mm AccuFab Throttlebody
C & L Intake Plenum
2 1/2" X-pipes
Anderson PowerPipe
MagnaFlow Mufflers
Diablo Custom Chip
3.73's
Steeda Lower Control Arms
358 rwhp (Mustang Dyno)

New Track Times Coming Soon
SleeperGT is offline   Reply With Quote
Old 10-18-2003, 04:24 AM   #4
explicitone
Registered Member
 
explicitone's Avatar
 
Join Date: Apr 2002
Location: racine ,wi
Posts: 691
Default

Quote:
Originally posted by SleeperGT
Thanks explicitone. You validated what I was told at the shop. But I do have to confess I would have liked the little sheet of paper with the pretty chart on it to have had larger numbers to brag about .
I dont blame you I think we all would

but look at it this way if your in to drag racing can get those little slips to brag about and that to me makes all the differance
__________________
RUN IT STAIGHT AND RUN IT HARD


________



Novi 2000
60' 1.46
1/4 10.67
mph 126.5
_________
explicitone is offline   Reply With Quote
Old 10-22-2003, 01:42 PM   #5
Skyman
I need 110mph Trap Speed!
 
Skyman's Avatar
 
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
Default

The tracks the only thing that ever tells the truth, the dyno is always full of ****.
__________________
2001 BMW M3 6spd
12.79@108

RIP
----
1993 Notch w/ 98 4V 4.6 Fasttt...

-1989 Saleen Mustang #406-
12.32@109

-1999 Black Cobra Coupe-
JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.
Skyman is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Darius' dyno numbers drudis Power Adders 7 08-27-2004 04:09 PM
disapionted with dyno numbers 302crew Windsor Power 7 08-13-2003 10:22 AM
My latest dyno adventures XR1stang Blue Oval Lounge 6 08-01-2003 04:00 PM
Dyno resource website 97mustangcobrad Racer's Club House 0 11-08-2001 11:38 AM


All times are GMT -5. The time now is 11:39 PM.


SEARCH