Help with nitrous please
I haven't sprayed new motor at all so system hasn't been activated
in about 6 1/2 yrs. Went to spray what amounts to an 87 shot (I
forget actual jet sizes) anyway it acted like the Nos solenoid didn't
open (popped and missed, "stumbled"). So I unhooked the solenoids
and they both clicked when I put power to them(both ohmed out
the same so I tried powering them). Now it seems to be getting
nitrous because it pulls, but still misses and stumbles bad(like it's
not getting enough nitrous). I unhooked all lines anb blew them out,
blew out nozzle, checked jets and screen filter on inlet side of
solenoid. Still same?? I'm kinda new at nitrous but I understand it,
got plenty of bottle pressure, system works (I'm confiedent it's
getting some nos now) can the solenoid be not opening all the way?
I thought it was open or closed, and if stuck or broke it wouldn'd
open at all right? It's a wet system with one nozzle in intake elbow.
Any help is GREATLY APPRECIEATED!! Sorry so long.
Thanks
Wes
__________________
88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306.
DYNO TUNED TO 300.97 RWHP 337RWTQ
|