dynoed my car guys!

46stang · 09-07-2001, 09:17 PM

hey guys i got my car dynoed today on a dynojet dyno! i got 271.3hp and 302.3tq. I'm happy. would like more but who doesn't. ha ha! for my local ventura boys they gave some fliers for you guys to get 10% off of a dyno session! i had it dynoed in the valley at morgan motorsports. the guys there are real cool! for 3 pulls with a air/fuel check it ran like $105. if you guys want a flier let me know and we'll hook up some discounts!
Leon
here's a link to my dyno graph if you'd like a peak!
http://communities.msn.com/leonstang...oto&PhotoID=21

------------------
96 stang,ported 99 heads, 01 bullit intake, 99 cams,Steeda power pullies,Steeda timing adj.,Kirban adj.reg.,Pro-m 87,24#inj.,Twin 57mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,home depot ram air, k@n,
373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter.
best et 13.80
best mph 103.3
bfg street tires,bakersfield, ca

[This message has been edited by 46stang (edited 09-07-2001).]

89cp · 09-07-2001, 10:21 PM

Cool stuff!
I want a discount.

aurilius_maximus · 09-08-2001, 10:40 AM

Thats is some pretty impressive power, I have a 96 cobra and I only dynoed 2 more hp than you! I dont know what my torque was but I think it was less than 300 for sure.

------------------
96 Mustang Cobra Blk\Blk Basically Stock...

Kevin Price · 09-08-2001, 11:49 AM

Moved to Blue Oval Lounge

------------------
SVO siamesed 351 stroked to 417ci,Yates heads, solid roller,Trans King glide and a little blue bottle
of giggle gas. My Car

Extremestang · 09-09-2001, 05:06 PM

Hey, i'm from Ventura....pass on one of those discounts to my e-mail for me, thanks. I sent you an I.M as well.

46stang · 09-10-2001, 10:35 PM

I work at Todey Lincoln Mercury in oxnard, on ventura blvd, by Vista ford off of rose ave. off ramp, 101frwy. if you guys want to stop by i'll give you a discount flier. I have like 5 or so. thanks for the compliments

Leon

Skyman · 09-11-2001, 02:38 AM

Thats what you should dyno!

You know I was examining my dyno sheet recenly and I can clearly see that they lied to me at germanson!

Its hard to say on here, but its interesting.

How much did you gain from tuning with them?

You going this saturday?

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
332RWHP, 350rwtq

46stang · 09-11-2001, 09:08 AM

i believe it was 6-7rwhp from the fuel psi adj. and no hp from the timing. i had my timing at 14 deg all ready. we moved the timing to 17deg. and i picked up some torque on the bottom end though! like 4-5 lbs from 2500 to 3500rpm. i could have gotten a few more hp with leaning it out but around 2500rpm it was pretty lean and he didn't want to risk pinging or detonation on the bottom for a few ponies up top! they mostly do chevy stuff but the guy was way cool. he let this one kid wash like 4 of there cars and clean the bay for a dyno tune! it was pretty cool.
leon

09-07-2001, 09:17 PM	#1
46stang Registered Member Join Date: May 1999 Location: moorpark ca Posts: 340	dynoed my car guys! hey guys i got my car dynoed today on a dynojet dyno! i got 271.3hp and 302.3tq. I'm happy. would like more but who doesn't. ha ha! for my local ventura boys they gave some fliers for you guys to get 10% off of a dyno session! i had it dynoed in the valley at morgan motorsports. the guys there are real cool! for 3 pulls with a air/fuel check it ran like $105. if you guys want a flier let me know and we'll hook up some discounts! Leon here's a link to my dyno graph if you'd like a peak! http://communities.msn.com/leonstang...oto&PhotoID=21 ------------------ 96 stang,ported 99 heads, 01 bullit intake, 99 cams,Steeda power pullies,Steeda timing adj.,Kirban adj.reg.,Pro-m 87,24#inj.,Twin 57mm t/b,BBK longtube headers,Bassani x-pipe w/cats, Dynomax ultraflow catback,home depot ram air, k@n, 373's,cobra brakes,fms spings, lakewood 90/10's and 50/50's tri-ax shifter. best et 13.80 best mph 103.3 bfg street tires,bakersfield, ca [This message has been edited by 46stang (edited 09-07-2001).]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Edel. non-smog to AFR smog legal heads? What do you guys think?	Simi Stang	Windsor Power	10	06-19-2003 11:14 PM
Let me know what u think guys, kinda long	ex-lt1-guy	Blue Oval Lounge	2	03-04-2002 01:11 PM
Here is the deal with the GM guys at work	bri32z	Stang Stories	22	11-27-2001 01:34 PM
dynoed my car guys!	46stang	Stang Stories	3	09-08-2001 11:49 AM

09-07-2001, 10:21 PM	#2
89cp Registered Member Join Date: Jan 2001 Location: _ Posts: 35	Cool stuff! I want a discount.

09-08-2001, 10:40 AM	#3
aurilius_maximus Registered Member Join Date: Oct 2000 Location: Mt. Shasta, California, 96067 Posts: 77	Thats is some pretty impressive power, I have a 96 cobra and I only dynoed 2 more hp than you! I dont know what my torque was but I think it was less than 300 for sure. ------------------ 96 Mustang Cobra Blk\Blk Basically Stock...

09-08-2001, 11:49 AM	#4
Kevin Price Registered Member Join Date: Jan 1999 Location: Oxford, KS Posts: 935	Moved to Blue Oval Lounge ------------------ SVO siamesed 351 stroked to 417ci,Yates heads, solid roller,Trans King glide and a little blue bottle of giggle gas. My Car

09-09-2001, 05:06 PM	#5
Extremestang Registered User Join Date: Jun 2001 Location: North Carolina Posts: 176	Hey, i'm from Ventura....pass on one of those discounts to my e-mail for me, thanks. I sent you an I.M as well.

09-10-2001, 10:35 PM	#6
46stang Registered Member Join Date: May 1999 Location: moorpark ca Posts: 340	I work at Todey Lincoln Mercury in oxnard, on ventura blvd, by Vista ford off of rose ave. off ramp, 101frwy. if you guys want to stop by i'll give you a discount flier. I have like 5 or so. thanks for the compliments Leon

09-11-2001, 02:38 AM	#7
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Thats what you should dyno! You know I was examining my dyno sheet recenly and I can clearly see that they lied to me at germanson! Its hard to say on here, but its interesting. How much did you gain from tuning with them? You going this saturday? Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor *332RWHP, 350rwtq*

09-11-2001, 09:08 AM	#8
46stang Registered Member Join Date: May 1999 Location: moorpark ca Posts: 340	i believe it was 6-7rwhp from the fuel psi adj. and no hp from the timing. i had my timing at 14 deg all ready. we moved the timing to 17deg. and i picked up some torque on the bottom end though! like 4-5 lbs from 2500 to 3500rpm. i could have gotten a few more hp with leaning it out but around 2500rpm it was pretty lean and he didn't want to risk pinging or detonation on the bottom for a few ponies up top! they mostly do chevy stuff but the guy was way cool. he let this one kid wash like 4 of there cars and clean the bay for a dyno tune! it was pretty cool. leon