Finally: Track Times 1/4 mile

Five0 · 01-21-2001, 06:20 AM

I went to the track on Saturday and I am a little disappointed with my times but I was told we still can get more out of it so I guess it will have to wait till the next day at the track. I ran a 12.565 @109.38mph.

exgmguy · 01-21-2001, 10:46 AM

Details?

pro88 · 01-21-2001, 05:32 PM

Boy it must me nice to be able to go racing in January. Maybe I need to move to Florida. Using these computer games just isn't cutting it. Sounds like you need to give more DETAILS.... What's it doing???????????

Five0 · 01-21-2001, 06:32 PM

1.764 60 ft
8.078 1/8 mile @86.53mph
12.565 1/4 mile @109.38mph
Before the carburetor I ran a 7.686 at 90.20mph in the 1/8 mile with a 1.708 60ft.
I need to do a little more tuning, We got 2 more mph out of it by turning the timing back 5 degrees and got a couple more by playing with the carburetor and fuel pressure but There is still more tuning left to do.
It falls on its face when I launch under 6000 rpm's and has nowhere near the power or throttle response on the low end but it does seem to pull harder up high.

Skyman · 01-21-2001, 10:04 PM

What kinda car you got and what are your mods?!?!

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft.

On its way: Paxton Sn-89 with dyno tuning and long tubes.

Just added: B&M Ripper, Weldin Subframes, & Turn downs!
13.2@106mph

Five0 · 01-22-2001, 11:33 AM

91 lx (ex trooper car)

My mod’s are: stage2 Canfield heads, Comp cams (Duration 224/230@.050 Lift .544 w/1.7) (lobe separation 112), 1.7 roller rockers, MSD Digital 6+, MSD Coil, Performer rpm intake, Holley 650 Carburetor, Under drive race pulleys, 255lph fuel pump, adjustable fuel pressure regulator, headers, 2 chamber flowmasters, 2 ½” offroad’s, k&n, 3.55 gears, weld drag light rims, 90/10 drag struts, 50/50 shocks, Southside machine upper and lower control arms, sub frame connectors, 6 point roll cage, ram clutch, aluminum drive shaft, auburn pro differential, 31 spline axels, aluminum radiator, Jacobs wires, and 5 point harness.

01-21-2001, 06:20 AM	#1
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	Finally: Track Times 1/4 mile I went to the track on Saturday and I am a little disappointed with my times but I was told we still can get more out of it so I guess it will have to wait till the next day at the track. I ran a 12.565 @109.38mph.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1/4 mile times	95stang50	Windsor Power	24	02-17-2003 07:40 PM
Quarter mile times	67 Demon	Classic Mustangs	11	05-30-2002 12:40 AM
Again, new track times.	exgmguy	Stang Stories	20	04-19-2002 06:12 AM
Track Times!!! well, kinda.	SaleenGTS	Stang Stories	9	08-09-2001 10:57 AM
Track Times	86GT	Stang Stories	6	07-29-2001 04:20 PM

01-21-2001, 10:46 AM	#2
exgmguy Registered Member Join Date: Feb 1999 Location: Utica, Michigan Posts: 2,631	Details?

01-21-2001, 05:32 PM	#3
pro88 Registered Member Join Date: Dec 2000 Location: roseburg, oregon Posts: 87	Boy it must me nice to be able to go racing in January. Maybe I need to move to Florida. Using these computer games just isn't cutting it. Sounds like you need to give more DETAILS.... What's it doing???????????

01-21-2001, 06:32 PM	#4
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	1.764 60 ft 8.078 1/8 mile @86.53mph 12.565 1/4 mile @109.38mph Before the carburetor I ran a 7.686 at 90.20mph in the 1/8 mile with a 1.708 60ft. I need to do a little more tuning, We got 2 more mph out of it by turning the timing back 5 degrees and got a couple more by playing with the carburetor and fuel pressure but There is still more tuning left to do. It falls on its face when I launch under 6000 rpm's and has nowhere near the power or throttle response on the low end but it does seem to pull harder up high.

01-21-2001, 10:04 PM	#5
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	What kinda car you got and what are your mods?!?! Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft. On its way: Paxton Sn-89 with dyno tuning and long tubes. Just added: B&M Ripper, Weldin Subframes, & Turn downs! 13.2@106mph

01-22-2001, 11:33 AM	#6
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	91 lx (ex trooper car) My mod’s are: stage2 Canfield heads, Comp cams (Duration 224/230@.050 Lift .544 w/1.7) (lobe separation 112), 1.7 roller rockers, MSD Digital 6+, MSD Coil, Performer rpm intake, Holley 650 Carburetor, Under drive race pulleys, 255lph fuel pump, adjustable fuel pressure regulator, headers, 2 chamber flowmasters, 2 ½” offroad’s, k&n, 3.55 gears, weld drag light rims, 90/10 drag struts, 50/50 shocks, Southside machine upper and lower control arms, sub frame connectors, 6 point roll cage, ram clutch, aluminum drive shaft, auburn pro differential, 31 spline axels, aluminum radiator, Jacobs wires, and 5 point harness.