Cheap 'official' Ford Rims

Sonics2042 · 08-05-2002, 03:55 PM

Hello,

I want to buy some 16" or 17" Mustang rims. They need to be new, four lug, and I don't want emblems

. Looking for like the 93 GT or 93+ Cobra rims. (I would LOVE to get some 4-lug 93 Cobra R rims, but I don't think they exist.)

Any online sites that would fulfill such a need?

Thanks,
DoranW

Hethj7 · 08-05-2002, 04:25 PM

I don't remember what all was offered by these guys, but I just got my Cobra R's from here. As far as prices go, they were by far the cheapest I could find. The wheels look good so far....hopefully they hold up well.

Sonics2042 · 08-05-2002, 04:55 PM

Prices are really good...2 questions...

If I lower my car 1.5 inches, will 17x9s fit all around on a 1990 Fox body?

Also, assuming set = 4. Fair assumption?

Thanks,
DoranW

sonic21 · 08-05-2002, 05:29 PM

Quote:

Originally posted by Sonics2042
Prices are really good...2 questions...

If I lower my car 1.5 inches, will 17x9s fit all around on a 1990 Fox body?

Thanks,
DoranW

They should fit fine

Sonics2042 · 08-05-2002, 06:43 PM

sigh...too much stuff I want to do with my car....

I think after this current project*, I am going to go for some suspension stuff...it never ends! Oh well

*Current Project
AOD --> T5
Black Carpet (Interior and Cargo)
Black seat cover
Corbeau Racing seats up front.

Thinking tint, lower 1.5", control arms, subframe connectors, and rims/tires for winter project...

Thanks,
DoranW

NYC1 · 08-05-2002, 08:14 PM

I have some original 17" factory alloys for sale. email for pics. they're off a 94gt. One has a hairline crack that can be fixed. All four for $200. They're 5 lug though. You can get a conversion kit with the money you save on the great price.

email: nyc_uno@hotmail.com

Hethj7 · 08-05-2002, 08:47 PM

You might be careful going 17x9 at all corners on a 1990. Most people would say go with a 17x8 in the front. Remember, 1990 is still before Mustangs came with wider inner fenders to accomodate larger rims/tires. Go to afs. They do a good job explaining stuff on the early Stangs. I would have boguht their kit with the two 17x8's and two 17x9 wheels, but they were on backorder and couldn't give me an estimate on then they would be ready to ship.

That being said....I bought 17x9 wheels for all four corners on my 1990 Stang

! The website I sent you to said they add 18 mm of offset to their wheels, so they should fit. We will find out soon enough. I got my new wheels/tires mounted and balanced, but they are not on the car yet. I have to get a different set of lug nuts to make them fit, which I should pick up tomorrow. So, if all goes well, I can let everyone know by tomorrow night what the fit is like on my car.

Hethj7 · 08-05-2002, 08:56 PM

Oh, and set = 4 is a fair assumption

!

JohnnyG · 08-06-2002, 09:06 AM

Just went through this on my car with the Ford 17x9 Cobra R's. I have a 1991 GT (larger wheel wells), and still ran into problems with everything fitting. I actually spent yesterday afternoon grinding some of the spots where the wheels were rubbing in the wheel wells, and rolling the fender lips. I would be wary of trying to fit those rims in a 1990 Fox without being prepared for some additional modifications. In the meantime, check out this site, I found it VERY helpful:

http://sn95brakes.cjb.net/

Check out the links along the left hand side of the page under "My Links".

08-05-2002, 03:55 PM	#1
Sonics2042 Registered Member Join Date: Jul 2001 Location: Seattle, WA Posts: 381	Cheap 'official' Ford Rims Hello, I want to buy some 16" or 17" Mustang rims. They need to be new, four lug, and I don't want emblems . Looking for like the 93 GT or 93+ Cobra rims. (I would LOVE to get some 4-lug 93 Cobra R rims, but I don't think they exist.) Any online sites that would fulfill such a need? Thanks, DoranW __________________ What I have: 1990 Red Mustang 5.0 LX: [BBK X-Pipe]-[MAC Cat-Back Exhaust] [MAC Cold Air Intake]-[BBK Equal Shorties] [3.55 Gears]-[Cobra Intake Manifold (Upper and Lower] [E-303 Cam]-[Granetelli Mass Air Flow Sensor] [Front and rear sway bars]-[New black carpet and seats.] [Adjustable Fuel Regulator]-[T5 Conversion w/ K. Cobra Clutch/Hurst STS] [Cobra Throttle Body]-[130A Alt. Conversion] Thinking about: Aftermarket Heads! Vortech A-Trim

08-05-2002, 04:25 PM	#2
Hethj7 Mizzou Tigers Join Date: Apr 1999 Location: weston, MO United States Posts: 1,455	I don't remember what all was offered by these guys, but I just got my Cobra R's from here. As far as prices go, they were by far the cheapest I could find. The wheels look good so far....hopefully they hold up well. __________________ 2006 Mustang GT 1990 LX GT-40 motor 262 horsepower, 307ft-lbs (sold but forever loved) 1998 Contour SVT Rice Haters Club Member #244

08-05-2002, 04:55 PM	#3
Sonics2042 Registered Member Join Date: Jul 2001 Location: Seattle, WA Posts: 381	Prices are really good...2 questions... If I lower my car 1.5 inches, will 17x9s fit all around on a 1990 Fox body? Also, assuming set = 4. Fair assumption? Thanks, DoranW __________________ What I have: 1990 Red Mustang 5.0 LX: [BBK X-Pipe]-[MAC Cat-Back Exhaust] [MAC Cold Air Intake]-[BBK Equal Shorties] [3.55 Gears]-[Cobra Intake Manifold (Upper and Lower] [E-303 Cam]-[Granetelli Mass Air Flow Sensor] [Front and rear sway bars]-[New black carpet and seats.] [Adjustable Fuel Regulator]-[T5 Conversion w/ K. Cobra Clutch/Hurst STS] [Cobra Throttle Body]-[130A Alt. Conversion] Thinking about: Aftermarket Heads! Vortech A-Trim

08-05-2002, 06:43 PM	#5
Sonics2042 Registered Member Join Date: Jul 2001 Location: Seattle, WA Posts: 381	sigh...too much stuff I want to do with my car.... I think after this current project, I am going to go for some suspension stuff...it never ends! Oh well Current Project AOD --> T5 Black Carpet (Interior and Cargo) Black seat cover Corbeau Racing seats up front. Thinking tint, lower 1.5", control arms, subframe connectors, and rims/tires for winter project... Thanks, DoranW __________________ What I have: 1990 Red Mustang 5.0 LX: [BBK X-Pipe]-[MAC Cat-Back Exhaust] [MAC Cold Air Intake]-[BBK Equal Shorties] [3.55 Gears]-[Cobra Intake Manifold (Upper and Lower] [E-303 Cam]-[Granetelli Mass Air Flow Sensor] [Front and rear sway bars]-[New black carpet and seats.] [Adjustable Fuel Regulator]-[T5 Conversion w/ K. Cobra Clutch/Hurst STS] [Cobra Throttle Body]-[130A Alt. Conversion] Thinking about: Aftermarket Heads! Vortech A-Trim

08-05-2002, 08:14 PM	#6
NYC1 Registered Member Join Date: Jun 2001 Location: Maryland, USA Posts: 169	I have some original 17" factory alloys for sale. email for pics. they're off a 94gt. One has a hairline crack that can be fixed. All four for $200. They're 5 lug though. You can get a conversion kit with the money you save on the great price. email: nyc_uno@hotmail.com __________________ 94GT 5spd Coupe 1/4 = 13.6@103 60ft = 2.0315 on Michelin Pilots GT 40 Intake GT 40Y Aluminum heads 1.7 rockers, BBK Cold air Fluidyne, BBK long tubes & H-Pipe 65mm TB Al Driveshaft Hurst Shifter Cobra R hood HPM Subframes Control Arms Future mods = Procharger and/or 331/347 Stroker, Turbo? Rice Haters Club Member #77 FOR SALE: Strut Tower Brace $30

08-05-2002, 08:47 PM	#7
Hethj7 Mizzou Tigers Join Date: Apr 1999 Location: weston, MO United States Posts: 1,455	You might be careful going 17x9 at all corners on a 1990. Most people would say go with a 17x8 in the front. Remember, 1990 is still before Mustangs came with wider inner fenders to accomodate larger rims/tires. Go to afs. They do a good job explaining stuff on the early Stangs. I would have boguht their kit with the two 17x8's and two 17x9 wheels, but they were on backorder and couldn't give me an estimate on then they would be ready to ship. That being said....I bought 17x9 wheels for all four corners on my 1990 Stang ! The website I sent you to said they add 18 mm of offset to their wheels, so they should fit. We will find out soon enough. I got my new wheels/tires mounted and balanced, but they are not on the car yet. I have to get a different set of lug nuts to make them fit, which I should pick up tomorrow. So, if all goes well, I can let everyone know by tomorrow night what the fit is like on my car. __________________ 2006 Mustang GT 1990 LX GT-40 motor 262 horsepower, 307ft-lbs (sold but forever loved) 1998 Contour SVT Rice Haters Club Member #244

08-05-2002, 08:56 PM	#8
Hethj7 Mizzou Tigers Join Date: Apr 1999 Location: weston, MO United States Posts: 1,455	Oh, and set = 4 is a fair assumption ! __________________ 2006 Mustang GT 1990 LX GT-40 motor 262 horsepower, 307ft-lbs (sold but forever loved) 1998 Contour SVT Rice Haters Club Member #244

08-06-2002, 09:06 AM	#9
JohnnyG Registered Member Join Date: Feb 1999 Location: Baltimore, MD USA Posts: 105	Just went through this on my car with the Ford 17x9 Cobra R's. I have a 1991 GT (larger wheel wells), and still ran into problems with everything fitting. I actually spent yesterday afternoon grinding some of the spots where the wheels were rubbing in the wheel wells, and rolling the fender lips. I would be wary of trying to fit those rims in a 1990 Fox without being prepared for some additional modifications. In the meantime, check out this site, I found it VERY helpful: http://sn95brakes.cjb.net/ Check out the links along the left hand side of the page under "My Links". __________________ 1991 GT Vert- Black/Black/Black Exhaust, Tremec, Tri-Ax, Centerforce Dual Friction, 3.73's, Rear Seat Delete MM Road & Track Kit PBR 5-Lug Brakes Cobra R's w/ 255 Rubber Rice Hater's Club #60

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Thank You Ford!	xxxBlakexxx	Blue Oval Lounge	18	03-04-2004 06:40 PM
Need Ford Racing Monster Tach	White GT	Windsor Power	0	08-10-2003 11:02 AM
1981 Mustang rims. Please LOOK!!!	tireburner163	Blue Oval Lounge	8	11-08-2001 08:09 PM
Changes at Ford???	93CobraR	Blue Oval Lounge	3	11-02-2001 09:20 PM
which (cheap) tires best for stock rims?	HKstang	Windsor Power	6	05-26-2001 06:40 AM