many questions!

jfharris · 05-07-2002, 08:45 AM

Where the heck is the PCV valve on my 86 5.0L Mustang, where is this baffle I hear people talking about in the air intake that they take out, and is taking the baffle out worth it? Also who makes the best mass airflow conversion kit for an absolutely stock engine?

Thanks

Mr 5 0 · 05-07-2002, 09:20 AM

The PCV is located on the very end of the intake, in the center. To find it, on a cold engine use a strong light or just go by 'feel'. The thick PCV hose goes into it so feel for that. It's a unit; a screen, the valve and a grommet. Buy the kit at any Ford dealer. About $10.

The baffle is an 'air silencer' in the right front fender. It's meant to quiet the intake of air. It's useless - and removing it can be worth as much as 4 HP. Well worth it for a freebie that's easy to do.

To remove it, you have to first remove the plastic airbox that holds the air filter (a few small bolts). Then remove the protruding bolts from the fender that hold the silencer. Then, you have to simply wiggle it out of the fenderwell. A little tricky but just have patience - it comes out eventually. Thousands have been successfully removed from Mustangs over the years.

Not only do you pick up a few HP, but when you floor it, the sound is awesome.

I would suggest the Ford Racing kit for a Mass Airflow conversion or simply buy the parts off a wreck and replace what's needed. A lot cheaper that way.

Kamaro Killer · 05-07-2002, 12:07 PM

I know I've asked where the PCV is myself, but I can't find it either. I don't know if it's possible, but can someone please take a picture of the PCV while it's still on their car? My engine was recently rebuilt and when I took it apart it ran really badly, I think it had to do with it missing the PCV. Thanks for your help!

Mr 5 0 · 05-07-2002, 12:52 PM

This link may help with PCV location and other related info.

http://www.promustangs.com/pcv.html

Falcons Talon · 05-07-2002, 01:21 PM

Instead of a screw, I used a fishing hook to get the mesh screen out. Good ole' tackle box!!!

Kamaro Killer · 05-07-2002, 02:17 PM

That is exactly what I was looking for. Thanks very much, I appreciate all the help I get from everyone here!

05-07-2002, 08:45 AM	#1
jfharris Registered Member Join Date: Mar 2002 Location: Raleigh, NC Posts: 11	many questions! Where the heck is the PCV valve on my 86 5.0L Mustang, where is this baffle I hear people talking about in the air intake that they take out, and is taking the baffle out worth it? Also who makes the best mass airflow conversion kit for an absolutely stock engine? Thanks

05-07-2002, 09:20 AM	#2
Mr 5 0 Conservative Individualist Join Date: May 1997 Location: Wherever I need to be Posts: 7,487	Questions and answers The PCV is located on the very end of the intake, in the center. To find it, on a cold engine use a strong light or just go by 'feel'. The thick PCV hose goes into it so feel for that. It's a unit; a screen, the valve and a grommet. Buy the kit at any Ford dealer. About $10. The baffle is an 'air silencer' in the right front fender. It's meant to quiet the intake of air. It's useless - and removing it can be worth as much as 4 HP. Well worth it for a freebie that's easy to do. To remove it, you have to first remove the plastic airbox that holds the air filter (a few small bolts). Then remove the protruding bolts from the fender that hold the silencer. Then, you have to simply wiggle it out of the fenderwell. A little tricky but just have patience - it comes out eventually. Thousands have been successfully removed from Mustangs over the years. Not only do you pick up a few HP, but when you floor it, the sound is awesome. I would suggest the Ford Racing kit for a Mass Airflow conversion or simply buy the parts off a wreck and replace what's needed. A lot cheaper that way.

05-07-2002, 12:07 PM	#3
Kamaro Killer Mustang Enthusiast Join Date: Mar 2002 Posts: 528	PCV location?? I know I've asked where the PCV is myself, but I can't find it either. I don't know if it's possible, but can someone please take a picture of the PCV while it's still on their car? My engine was recently rebuilt and when I took it apart it ran really badly, I think it had to do with it missing the PCV. Thanks for your help! __________________ 1993 GT 5.0-My Stang Rice Hater's Club Member 22

05-07-2002, 12:52 PM	#4
Mr 5 0 Conservative Individualist Join Date: May 1997 Location: Wherever I need to be Posts: 7,487	PCV...where are you? This link may help with PCV location and other related info. http://www.promustangs.com/pcv.html

05-07-2002, 01:21 PM	#5
Falcons Talon T.P.M. President Join Date: May 2002 Location: Brownsville Posts: 265	Good link Instead of a screw, I used a fishing hook to get the mesh screen out. Good ole' tackle box!!!

05-07-2002, 02:17 PM	#6
Kamaro Killer Mustang Enthusiast Join Date: Mar 2002 Posts: 528	Very Helpful Link! That is exactly what I was looking for. Thanks very much, I appreciate all the help I get from everyone here! __________________ 1993 GT 5.0-My Stang Rice Hater's Club Member 22

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just got a 98, have some questions?	98GTNewbie	Modular Madness	5	08-30-2003 12:41 AM
Quick questions on Explorer Intake install.	Falcons Talon	Windsor Power	2	08-21-2003 12:40 PM
Several questions about oil.	zepherman	Windsor Power	3	08-03-2002 06:59 AM
HELP! Newbie 95-96 GT questions	Ron Brooks	Blue Oval Lounge	7	07-11-2001 07:38 PM
S/R Questions	DAMION	Racer's Club House	1	09-30-1999 11:02 AM