i know its not ford

RAGE_5.0 · 08-13-2001, 07:11 PM

well my dad is thinkin about gettin a k&N airfileter for his 2001 dodge ram offroad(silver and completly loaded,5.9L 3 inch lift kit,4:10 posi rear,limited slip).....i mjkust say that this truck is a lot nicer then the fords i have seen.........well anyways he went to the local parts store and asked about it anmd they said 190 canadian which is about 150 american........does this seem a little high????????? the air filter is a lot bigger then on a mustang but still i think that is really high

thx for any help

JAMES

------------------
Black 1990 gt cobra bonestock
not for long

tireburner163 · 08-13-2001, 07:48 PM

Maybe $150 for a air induction kit, but just the K&N filter is about $30 US dollars

------------------
DEAD(FRIED TRANS)
1990 Dodge Dynasty with 275,000 miles. Mods:chiped paint, CD player. Sucks but it was free. Praying for a stang.
The "Guetto Glider"

If it ain't broke, you ain't tryin hard enough

86GT · 08-16-2001, 10:30 AM

That's a lot of money, especially from Crappy Tire or D&T. (If D&T carries them I don't know). If I were you I'd try looking around at like summit racing's web site, or ebay.. you never know what you may find.

RAGE_5.0 · 08-16-2001, 06:37 PM

that was at d&t......my buddy just got a job at canadian tire(he has an 88gt.awesome car) i will go see him...i hav a few questions for him anyways

------------------
Black 1990 gt cobra bonestock
not for long

86GT · 08-16-2001, 08:32 PM

Yeah, see if he can get a better price on it, cuz D&T is always a bit more on performance stuff. Which guy is the one with the 88GT?

stanger8172 · 08-17-2001, 12:44 AM

That is way too high. You can get a better price than that somewhere else.

------------------
'91 LX, T-5, Centerforce Dual Friction, FMS adjustable cable w/quadrant, 3:55's(not installed yet), ported/polished/milled E7 heads, 1.6rr, 1.94/1.60 stainless valves, March Performance Pulleys and A/C Eliminator, short belt, K&N, battery in trunk, glasspacks w/turndowns, 225/50/16 Re 730's

RAGE_5.0 · 08-17-2001, 06:47 PM

his name is chad and he is from kingsville.......his car is sweet......he ran a 14 flat @99 with pullies and exhaust i believe and k&n

------------------
Black 1990 gt cobra bonestock
not for long

Frank VandenBerg · 08-17-2001, 09:03 PM

Yup, we know him, his car control arms and I think gears in it as well.

I'd probably go to Ramchargers or Murray's in Detroit. Just change it in the parking lot and pitch the old one.

------------------
1989 LX Hatchback
5.0, 5spd., 3.73's, 65mm TB,gasket matched upper int., phenolic spacer,MSD wires, Accell coil, pullies, K&N, MAC cat-back,BBK 1 5/8" chrome long tubes,Steeda clutch quadrant, HPM subs, HD clutch
Best ET- 14.1
Best MPH- 101
60ft. 2.329

2000 Honda CR250R

RAGE_5.0 · 08-18-2001, 12:33 AM

hey joe i saw u tonight.....we were next to u at the lights at erie and oak.......well i though to myself thats an 86 and it sounds good so i bet that it was u.....my buddy said joe and u just looked over at us.......we lost a hubcap to jumpin the tracks on elliot in muy buddies tempo.......who's gs is that man that thing is fuckin badass.....the impala is biekxs right?

------------------
Black 1990 gt cobra bonestock
not for long

Frank VandenBerg · 08-18-2001, 08:51 AM

Rage, the GS is James' car and the Impala is Biekx's car. They went racing without me.

RAGE_5.0 · 08-18-2001, 12:10 PM

i know the impala is a 454 cause i worked with dougs cousin jesse....is that a stage 1 gs with a 455?\man when that car pulled in my jawe droped and the car started to shake

------------------
Black 1990 gt cobra bonestock
not for long

Frank VandenBerg · 08-18-2001, 12:37 PM

The Buick has a stroked sbc and I think it's Skylark dressed like a GSX. Either way that car's awesome.

1BAD89 · 08-20-2001, 09:53 PM

Yeah that was most likely the air induction kit. My dad bought one for his truck and it was like $250.

------------------
1989 GT, 3:55's, full exhaust, 4 in. hood, Pro 5.0, etc... etc...

1989 Chevy S-10, EX. Cab-383(500+hp on motor), trick flow heads, trick flow pistons, etc... autometer phantom gauges, "built" 700R4, roll cage, lexan back window, corbeau seats, R.H.S. 5 harnesses, Fuel cell, convo pro wheels, 15x14's with 29x18.5 M/T'S on back, 15x4's on front, nitrous, and so much more!

http://www.geocities.com/i8urvpr/JM.html

08-13-2001, 07:11 PM	#1
RAGE_5.0 Registered Member Join Date: Jul 2001 Location: Leamington, Ontario, Canada Posts: 767	i know its not ford well my dad is thinkin about gettin a k&N airfileter for his 2001 dodge ram offroad(silver and completly loaded,5.9L 3 inch lift kit,4:10 posi rear,limited slip).....i mjkust say that this truck is a lot nicer then the fords i have seen.........well anyways he went to the local parts store and asked about it anmd they said 190 canadian which is about 150 american........does this seem a little high????????? the air filter is a lot bigger then on a mustang but still i think that is really high thx for any help JAMES ------------------ Black 1990 gt cobra bonestock not for long

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Safety Issue 64 - 70 Mustangs	Mach1 Cobra Jet	Classic Mustangs	20	07-11-2005 08:06 PM
Before buying a new Ford consider this.	Lizard King	Blue Oval Lounge	21	03-12-2005 03:24 PM
Carfax	mustangLX92	Blue Oval Lounge	1	04-30-2003 12:20 AM
Biggest all Ford drag racing event in SOCAL	navymailman	Ford Show & Go	5	09-19-2002 12:24 AM
2001 Cobra Over Rated AGAIN!!!?!?!!! Wassup Ford?	KillaZ350	Blue Oval Lounge	24	06-29-2001 05:24 PM

08-13-2001, 07:48 PM	#2
tireburner163 It's a lot like a race car Join Date: Aug 2000 Location: Meridian, MS Posts: 4,130	Maybe $150 for a air induction kit, but just the K&N filter is about $30 US dollars ------------------ DEAD(FRIED TRANS) 1990 Dodge Dynasty with 275,000 miles. Mods:chiped paint, CD player. Sucks but it was free. Praying for a stang. The "Guetto Glider" If it ain't broke, you ain't tryin hard enough

08-16-2001, 10:30 AM	#3
86GT Sniffed too much n20 Join Date: Oct 1998 Location: Ont, Canada Posts: 1,018	That's a lot of money, especially from Crappy Tire or D&T. (If D&T carries them I don't know). If I were you I'd try looking around at like summit racing's web site, or ebay.. you never know what you may find.

08-16-2001, 06:37 PM	#4
RAGE_5.0 Registered Member Join Date: Jul 2001 Location: Leamington, Ontario, Canada Posts: 767	that was at d&t......my buddy just got a job at canadian tire(he has an 88gt.awesome car) i will go see him...i hav a few questions for him anyways ------------------ Black 1990 gt cobra bonestock not for long

08-16-2001, 08:32 PM	#5
86GT Sniffed too much n20 Join Date: Oct 1998 Location: Ont, Canada Posts: 1,018	Yeah, see if he can get a better price on it, cuz D&T is always a bit more on performance stuff. Which guy is the one with the 88GT?

08-17-2001, 12:44 AM	#6
stanger8172 Registered Member Join Date: Nov 2000 Location: Milwaukee,Wisconsin Posts: 380	That is way too high. You can get a better price than that somewhere else. ------------------ '91 LX, T-5, Centerforce Dual Friction, FMS adjustable cable w/quadrant, 3:55's(not installed yet), ported/polished/milled E7 heads, 1.6rr, 1.94/1.60 stainless valves, March Performance Pulleys and A/C Eliminator, short belt, K&N, battery in trunk, glasspacks w/turndowns, 225/50/16 Re 730's

08-17-2001, 06:47 PM	#7
RAGE_5.0 Registered Member Join Date: Jul 2001 Location: Leamington, Ontario, Canada Posts: 767	his name is chad and he is from kingsville.......his car is sweet......he ran a 14 flat @99 with pullies and exhaust i believe and k&n ------------------ Black 1990 gt cobra bonestock not for long

08-17-2001, 09:03 PM	#8
Frank VandenBerg Registered Member Join Date: Oct 1998 Location: Ruthven, On. Canada Posts: 32	Yup, we know him, his car control arms and I think gears in it as well. I'd probably go to Ramchargers or Murray's in Detroit. Just change it in the parking lot and pitch the old one. ------------------ 1989 LX Hatchback 5.0, 5spd., 3.73's, 65mm TB,gasket matched upper int., phenolic spacer,MSD wires, Accell coil, pullies, K&N, MAC cat-back,BBK 1 5/8" chrome long tubes,Steeda clutch quadrant, HPM subs, HD clutch Best ET- 14.1 Best MPH- 101 60ft. 2.329 2000 Honda CR250R

08-18-2001, 12:33 AM	#9
RAGE_5.0 Registered Member Join Date: Jul 2001 Location: Leamington, Ontario, Canada Posts: 767	hey joe i saw u tonight.....we were next to u at the lights at erie and oak.......well i though to myself thats an 86 and it sounds good so i bet that it was u.....my buddy said joe and u just looked over at us.......we lost a hubcap to jumpin the tracks on elliot in muy buddies tempo.......who's gs is that man that thing is fuckin badass.....the impala is biekxs right? ------------------ Black 1990 gt cobra bonestock not for long

08-18-2001, 08:51 AM	#10
Frank VandenBerg Registered Member Join Date: Oct 1998 Location: Ruthven, On. Canada Posts: 32	Rage, the GS is James' car and the Impala is Biekx's car. They went racing without me.

08-18-2001, 12:10 PM	#11
RAGE_5.0 Registered Member Join Date: Jul 2001 Location: Leamington, Ontario, Canada Posts: 767	i know the impala is a 454 cause i worked with dougs cousin jesse....is that a stage 1 gs with a 455?\man when that car pulled in my jawe droped and the car started to shake ------------------ Black 1990 gt cobra bonestock not for long

08-18-2001, 12:37 PM	#12
Frank VandenBerg Registered Member Join Date: Oct 1998 Location: Ruthven, On. Canada Posts: 32	The Buick has a stroked sbc and I think it's Skylark dressed like a GSX. Either way that car's awesome.

08-20-2001, 09:53 PM	#13
1BAD89 Tubbed and Juiced Join Date: Mar 2001 Location: Tulsa, Oklahoma Posts: 1,861	Yeah that was most likely the air induction kit. My dad bought one for his truck and it was like $250. ------------------ 1989 GT, 3:55's, full exhaust, 4 in. hood, Pro 5.0, etc... etc... 1989 Chevy S-10, EX. Cab-383(500+hp on motor), trick flow heads, trick flow pistons, etc... autometer phantom gauges, "built" 700R4, roll cage, lexan back window, corbeau seats, R.H.S. 5 harnesses, Fuel cell, convo pro wheels, 15x14's with 29x18.5 M/T'S on back, 15x4's on front, nitrous, and so much more! http://www.geocities.com/i8urvpr/JM.html