![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Dec 2000
Location: VA
Posts: 80
|
![]() anyone here have a steeda tri-ax shifter, if so what do you think of it ?
also does anyone know the differences from the 96-97 and the 98 gt's, i have noticed in all the magazines that the 98 models dont have the same aftermarket parts? |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Dec 1998
Location: Manhattan, KS 66502
Posts: 599
|
![]() I run the B&M Ripper but I have felt a Tri-Ax and liked it. Hammer runs one and some others do as well so they can give you the low down.
Someone will correct me here but the 98 GT's have 225hp - 10 more than the 96-97's. It's either due to a different tune on the computer or that in conjunction with a slightly different exhuast setup. I think the console is slightly different as well with a cup holder. I don't think the 98's came stock with a strut tower brace either (not sure). Other than that they are basically the same. Someone here can verify and correct. ------------------ 66 Tahoe Turquoise Coupe Laser Red 96GT Ragtop Both are slow but easy on the eyes! |
![]() |
![]() |
![]() |
#3 |
AKA "Dr. Evil"
Join Date: Feb 1999
Location: South Fork Ranch
Posts: 1,721
|
![]() It's a great shifter, light years ahead of the stock one...
The 98 GTs had 10 more hp stock (225) and I think they have different brake lights.... But most of the engine parts SHOULD be the same... (to be honest, I don't know what Ford did to grab another 10hp out of it) ------------------ "The Yellowjacket" 1998 Mustang GT 13.97@103 "Hey, you weren't supposed to be that fast!"- Turbo Eclipse Driver |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Dec 1998
Location: Manhattan, KS 66502
Posts: 599
|
![]() Hey Hammer, how are the brake lights different than the 96-97's? Just curious.
------------------ 66 Tahoe Turquoise Coupe Laser Red 96GT Ragtop Both are slow but easy on the eyes! |
![]() |
![]() |
![]() |
#5 |
Git jiggy
Join Date: Oct 1999
Location: MO USA
Posts: 865
|
![]() From what I know Ford changed the exhaust header configuration a little and that's where the extra 10 hp comes from.
As far as the taillights, as far as I know they are the same 96-98. I personally haven't seen a difference between 96-97 and 98. Stefan how do you like the B&M Ripper? I'm trying to decide between it and the Steeda. ------------------ 1996 Mustang GTS |
![]() |
![]() |
![]() |
#6 |
Registered Member
Join Date: Dec 1998
Location: Manhattan, KS 66502
Posts: 599
|
![]() I didn't know if Hammer was talking about the actual lights themselves or the assemblies - as the 94-95's have the horizontal slats and the 96-98's have the vertical slats.
96GTS - I actually like both the Tri-Ax and the Ripper. I got an incredible deal on the B&M Ripper through www.carparts.com so I went with it. Someone described the Steeda Tri-Ax as kind of ratchety which describes it pretty well. It was awesome on the car I drove that had it, though. The Ripper feels awesome and it is definately solid. Anything is better than stock. You'd be happy with either one I guarantee. I haven't changed my gears out yet so when I do that will be the true test. To be honest I think I am going to go with 3:55's. That might sound like a wuss out but the car sees quite a bit of interstate time. I'm not worried about gas mileage i'm just paranoid about engine wear. If I regularly see constant speeds of 75-80 I think i'd be safer with 3:55's as opposed to 3:73's (unless anyone can argue otherwise). I'd love 3:73's but i'm just scared. Anyway, enough rambling and I hope that might have answered your question. ------------------ 66 Tahoe Turquoise Coupe Laser Red 96GT Ragtop Both are slow but easy on the eyes! |
![]() |
![]() |
![]() |
#7 |
Git jiggy
Join Date: Oct 1999
Location: MO USA
Posts: 865
|
![]() I had 3.55s before the 3.73s that I have now. Go ahead and get the 3.73s. There's not that much difference, rpm wise, on the highway, and I still get in the 20s mpg. I do alot of interstate/highway driving as well. Most of it at about 75 mph. The rpms are just about right. It's nice to not have to shift to pass someone, even in a hurry. With those gears with just a little bit of gas you're around them quite quickly. No downshifting to 4th just to pass someone unless you really have to haul to get around them.
![]() ------------------ 1996 Mustang GTS |
![]() |
![]() |
![]() |
#8 |
Registered Member
Join Date: Dec 1998
Location: Manhattan, KS 66502
Posts: 599
|
![]() Thanks for the info 96GTS. I'm planning on getting the gears and a hi-flow hpipe this year sometime. HP Motorsports in Omaha. quoted me a good deal on parts and install for the gears. I'll keep the 3:73's in consideration.
------------------ 66 Tahoe Turquoise Coupe Laser Red 96GT Ragtop Both are slow but easy on the eyes! |
![]() |
![]() |
![]() |
#9 |
Drag Racer!
Join Date: Nov 1999
Location: Lake Worth, FL USA
Posts: 757
|
![]() Something else to keep in mind is the UPR Blue Thunder shifter. It's basically the same as the Steeda Tri-ax but has a stronger handle and is cheaper.
![]() ------------------ 00 GT, MAC Offroad H, Steeda Pulleys, Steeda Timing Adjuster, FMS 4.10’s, Flows w/turndowns, UPR shifter, UPR subframes, UPR LCA’s, Air Filter, Lakewood 70/30 & 50/50, Weld Pro Stars, Nitto DR’s, Best ET on DR's 13.09@103.92 (1.81 60ft), Best on ET Drags 12.99@104.60 (1.67 60ft) 244.6 RWHP M/M 100 88 LX coupe X-FHP, 12pt Cage, UPR K-member, 31 spline rear, full spool… 85 Thunderbird Stock |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pro5.0 vs Steeda Tri-Ax shifter | Mustang_289 | Windsor Power | 7 | 10-03-2002 11:23 PM |
Best Shifter For The T45 Trans. Steeda Or Pro 5.0? | steedamustang01 | Modular Madness | 11 | 04-10-2002 08:59 AM |
Just bought the Steeda Tri-ax Shifter | swtstang | Windsor Power | 2 | 05-24-2001 02:47 AM |
A newbie dives in: steeda tri-ax shifter | thebean311 | Blue Oval Lounge | 3 | 03-09-2001 02:37 PM |
Need Help Installing Steeda Shifter | JamGtStang | Windsor Power | 2 | 01-13-2001 12:59 PM |