99-02 Msd Stacker 8/ignition Solutions

jmjett01 · 03-19-2003, 11:58 AM

QUESTION:

I'M CONSIDERING PURCHASING THE MSD STACKER 8 FOR MY 01 GT.

DOES ANYONE HAVE ANY EXTENT KNOWLEDGE ON OUTCOMES AND PERFORMANCE OF THIS PRODUCT?
PRODUCT LIFE AND APPLICATION WITH NITROUS?

I HAVE PLAYED PLENTY WITH THE 6A AND 6AL BUT IT DOES NOT APPLY TO THIS YEAR FOR ITS STRUCTURAL DIFFERENCE IN ITS DIS. I HAVE ALSO USED JACOBS ELECTRONICS AND HAVE RETURNED ALOT OF THERE COW POOP FOR REPAIR/REPLACEMENT, SO PLEASE DONT REFER THERE MANUFACTURED SH%T.

WHAT SHOULD I GAP MY PLUGS AT WITH THE MSD STACKER 8?
IS IT COMPATIBLE WITH NITROUS AND IS THERE ANY EXTRA EQUIPMENT INVOVLED?

I AM AWARE OF IGNITION SOLUTIONS BASED IN SD, CA. I DID CONSULTED WITH THERE OWNERS IN 2001 BUT I FEEL MSD IS A MORE RELIABLE COMPANY AND EASILY ACCESSIBLE. IGNITION SOLUTIONS IS MORE INVOVLED WITH IMPORTS THAN DOMESTIC.

THANK YOU FOR YOUR TIME AND REPLIES.

JETT

stangt00 · 03-19-2003, 03:15 PM

MSD finally came out with something for the coil on plug design? I emailed them along time ago asking them about it and never got a reply

How much do they want? Also, let me know if they are worth the $.

jmjett01 · 03-20-2003, 05:40 PM

MSD STACKER 8

LOOK AT DALLAS MUSTANG OR CALL 1 800 MUSTANG 389.99 RETAIL PRICE.

I JUST DID SOME RESEARCH TODAY ON THE PLASMA BOOSTER THAT IGNITION SOLUTIONS DEVELOPED. I.S. PRODUCES A WIDER BAND IN HP AND LBS OF TORQUE RATHER THAN THE MSD. MSD IS A NAME YOU ARE GOING TO PAY FOR, SO I HEAR. THE I.S. PLASMA BOOSTER COMES N/A OR SUPER CHARGER APPLICATION BOTH RUNNING AT 249.99 RETAIL. MY WEST COAST FRIENDS AT MANNING MOTORSPORTS, GRC PERFORMANCE, SPEED CENTER, SPEED CONCEPTS, AND OTHERS STATE THE SAME ON THE DYNO. IT IS A 7-15 HP FRIENDLY BOX, NOT MUCH IN MY OPINION, BUT IT DOES HELP IN AIR FUEL AND YOU DO BURN YOUR FUEL A LITTLE BETTER. THIS IS ESSENTIAL TO ME BECAUSE I DRIVE ON NITROUS PLUGS (COLDER) GAPPED AT 40 THOUSANDS WITH IS MURDER ON FUEL ECONOMY. I HAVE MADE MY ORDER AND WILL UPDATE YOU IF YOU LIKE WHEN I INSTALL THIS. I JUST PUT ON, WELD, D&D MOTORSPORT SUB FRAME CONNECTORS ABOUT TWENTY MINUTES AGO. IT'S NOT TO BAD.

QUESTION: WHERE DID YOU GET THE SPACER? I HAVE ASKED THIS MANY TIMES BUT I SEEM TO GET POINTED IN THE DIRECTION OF EBAY. I KNOW IT RUNS FOR LIKE 30 BUCKS, UPR HAS ONE FOR 80.

JETT

stangt00 · 03-20-2003, 06:34 PM

Ebay is where I got mine.

Dont know where else to maybe buy it from, I have seen aluminum's but this was the only phenolic. PLEASE let me know if that ignition system is worth the $. Thanks.

03-19-2003, 11:58 AM	#1
jmjett01 Registered Member Join Date: Mar 2003 Location: Texas/California Posts: 16	99-02 Msd Stacker 8/ignition Solutions QUESTION: I'M CONSIDERING PURCHASING THE MSD STACKER 8 FOR MY 01 GT. DOES ANYONE HAVE ANY EXTENT KNOWLEDGE ON OUTCOMES AND PERFORMANCE OF THIS PRODUCT? PRODUCT LIFE AND APPLICATION WITH NITROUS? I HAVE PLAYED PLENTY WITH THE 6A AND 6AL BUT IT DOES NOT APPLY TO THIS YEAR FOR ITS STRUCTURAL DIFFERENCE IN ITS DIS. I HAVE ALSO USED JACOBS ELECTRONICS AND HAVE RETURNED ALOT OF THERE COW POOP FOR REPAIR/REPLACEMENT, SO PLEASE DONT REFER THERE MANUFACTURED SH%T. WHAT SHOULD I GAP MY PLUGS AT WITH THE MSD STACKER 8? IS IT COMPATIBLE WITH NITROUS AND IS THERE ANY EXTRA EQUIPMENT INVOVLED? I AM AWARE OF IGNITION SOLUTIONS BASED IN SD, CA. I DID CONSULTED WITH THERE OWNERS IN 2001 BUT I FEEL MSD IS A MORE RELIABLE COMPANY AND EASILY ACCESSIBLE. IGNITION SOLUTIONS IS MORE INVOVLED WITH IMPORTS THAN DOMESTIC. THANK YOU FOR YOUR TIME AND REPLIES. JETT __________________ "The bullshit stops when my right foot drops"

03-19-2003, 03:15 PM	#2
stangt00 Registered Member Join Date: Dec 2002 Location: Philadelphia PA Posts: 143	MSD finally came out with something for the coil on plug design? I emailed them along time ago asking them about it and never got a reply How much do they want? Also, let me know if they are worth the $. __________________ 2000 GT 80mm Pro-M mass air, 24lb injectors, 75mm BBK T/B, K&N Filter Cold Air, 1/2" Phenolic intake spacer, Underdrive Pulleys, Dyno Tuned Autologic Chip, FMS Shorty Headers, Mac Prochamber 2 1/2" Off Road H pipe, 2 Chamber Flowmasters, Steeda lowering springs. Steeda Tri-Ax Short Throw shifter, Steeda Power slot rotors w/ Hawk Pro pads, 3.73 FRP Gears. Headwork and Comp cams install in progress.

03-20-2003, 05:40 PM	#3
jmjett01 Registered Member Join Date: Mar 2003 Location: Texas/California Posts: 16	MSD STACKER 8 LOOK AT DALLAS MUSTANG OR CALL 1 800 MUSTANG 389.99 RETAIL PRICE. I JUST DID SOME RESEARCH TODAY ON THE PLASMA BOOSTER THAT IGNITION SOLUTIONS DEVELOPED. I.S. PRODUCES A WIDER BAND IN HP AND LBS OF TORQUE RATHER THAN THE MSD. MSD IS A NAME YOU ARE GOING TO PAY FOR, SO I HEAR. THE I.S. PLASMA BOOSTER COMES N/A OR SUPER CHARGER APPLICATION BOTH RUNNING AT 249.99 RETAIL. MY WEST COAST FRIENDS AT MANNING MOTORSPORTS, GRC PERFORMANCE, SPEED CENTER, SPEED CONCEPTS, AND OTHERS STATE THE SAME ON THE DYNO. IT IS A 7-15 HP FRIENDLY BOX, NOT MUCH IN MY OPINION, BUT IT DOES HELP IN AIR FUEL AND YOU DO BURN YOUR FUEL A LITTLE BETTER. THIS IS ESSENTIAL TO ME BECAUSE I DRIVE ON NITROUS PLUGS (COLDER) GAPPED AT 40 THOUSANDS WITH IS MURDER ON FUEL ECONOMY. I HAVE MADE MY ORDER AND WILL UPDATE YOU IF YOU LIKE WHEN I INSTALL THIS. I JUST PUT ON, WELD, D&D MOTORSPORT SUB FRAME CONNECTORS ABOUT TWENTY MINUTES AGO. IT'S NOT TO BAD. QUESTION: WHERE DID YOU GET THE SPACER? I HAVE ASKED THIS MANY TIMES BUT I SEEM TO GET POINTED IN THE DIRECTION OF EBAY. I KNOW IT RUNS FOR LIKE 30 BUCKS, UPR HAS ONE FOR 80. JETT __________________ "The bullshit stops when my right foot drops"

03-20-2003, 06:34 PM	#4
stangt00 Registered Member Join Date: Dec 2002 Location: Philadelphia PA Posts: 143	Ebay is where I got mine. Dont know where else to maybe buy it from, I have seen aluminum's but this was the only phenolic. PLEASE let me know if that ignition system is worth the $. Thanks. __________________ 2000 GT 80mm Pro-M mass air, 24lb injectors, 75mm BBK T/B, K&N Filter Cold Air, 1/2" Phenolic intake spacer, Underdrive Pulleys, Dyno Tuned Autologic Chip, FMS Shorty Headers, Mac Prochamber 2 1/2" Off Road H pipe, 2 Chamber Flowmasters, Steeda lowering springs. Steeda Tri-Ax Short Throw shifter, Steeda Power slot rotors w/ Hawk Pro pads, 3.73 FRP Gears. Headwork and Comp cams install in progress.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
99-03 Gt/cobra Ignition Solutions Plasma Booster	jmjett01	Modular Madness	11	04-06-2003 12:03 AM
Poor Fuel Economy. Any solutions?	txsilver	Blue Oval Lounge	2	03-05-2002 04:09 PM
tranny cooler line kinked- solutions for fix	95DRGT	Windsor Power	2	11-01-2001 06:29 PM